Abstract:Electro-Fenton (EF) coupled with Pulsed alternating current coagulation (PACC) is an effective technology for the treatment of Cu2+-organic wastewater. In this study, the removal efficiency (Re), electrical energy consumption (EEC) and removal mechanism of Cu2+-organic were analyzed and the optimal operation parameters were determined. SEM, EDS, XRD and FTIR were used to characterize the morphology, elemental composition, crystal structure, function groups of sludge produced in the EF-PACC. UV, ESR and GC-MS were employed to determine concentration of organic matter, existence of OH, middle products of decomposed organic matter in EF-PACC, respectively. The results show that under the optimal conditions of initial pH = 2.5, current density (j) = 2 A/m2, initial c(Cu2+) = 50 mg/L, c(chemical oxygen demand, COD) = 500 mg/L, c[H2O2] = 10 mL/L, frequency (f) = 1 Hz, t = 20 min, the Re(Cu2+) can reach 99.59%. Re(COD) is 90.21%, EEC 1.695 × 10−1 kWh/m3, and the amount of produced sludge (Ws) is 0.9283 kg/m3. Compared with single EF and PACC processes, the order of treatment efficiency is EF-PACC > EF > PACC. EF-PACC technique was a highly effective method in the treatment of Cu2+-organic compound wastewater. The EF-PACC coupled process includes that electrolyzed Fe3+ produces electrocoagulation and OH produces degradation of organic compounds. The combined action of the two effects can effectively remove Cu2+-organic from wastewater.

Study on the effect of pH on Cu2+ removal from wastewater by potassium ferrate assisted PAC

Experimental Study on Application of PAC Produced Electrochemically in Water and Wastewater Treatment

Study on the treatment of Cu2+-organic compound wastewater by electro-Fenton coupled pulsed AC coagulation

Removal of Tannic Acid Stabilizes CuO Nanoparticles from Aqueous Media by PAFC: Effect of Process Conditions and Water Chemistry

Study on treatment of wastewater containing complex copper by iron powder assisted Fenton

Phosphorus Removal Using Ferric–calcium Complex As Precipitant: Parameters Optimization and Phosphorus-Recycling Potential

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Treatment of hospital wastewater by potassium ferrate

Comparative Study on the Removal Rate of CODcr with Three Kinds of Coagulants

Effects of Fe(II)/P Ratio and Ph on Phosphorus Removal by Ferrous Salt and Approach to Mechanisms

Study on the efficiency and mechanism of Oscillatoria removal from drinking water by ferrate

Research on Treatment of Nickel-containing Waste Water with Polymeric Ferric Phosphoric Sulfate

Adsorption of Metal Ions in Wastewater on Fly Ash

Electroplating Wastewater Treatment by Polyaluminum Ferric Chloride

[Removal of Turbidity and Effect of Humic Acid in Flocculation by Polyferric Chloride].

Study on Treatment of Effluent from A/O Coking Wastewater Treatment System by Ferric Sulphate Coagulant

Study on the pretreatment of printing & dyeing wastewater with composite polyaluminum ferric flocculants

Study on Fenton oxidation cooperated with coagulation of biologically treated coking wastewater]

Application of face centered composite central for optimization of pangasius catfish aquaculture wastewater treatment using potassium ferrate

Study on Advanced Treatment of Coking Wastewater by Fenton Oxidation Process

[Helicobacter pylori and stomach ulcer--diagnosis and treatment in primary health care].