Abstract:Impact performance and Damage Characterization of 3D woven composites under high temperature by a combination of experimental and numerical approach. This paper investigated the effect of elevated temperature on the impact‐induced deformation and damage behavior of 3D angle‐interlock woven composites. The transverse impacts were carried out at high temperatures of 90°C and 130°C using Split Hopkinson Pressure Bar matched with controlled environmental device. A meso‐scale finite element model considering the thermal‐mechanical coupling has been developed, and the numerical results were compared with the experimental data and high‐speed photography to study the effect of temperature and reinforcement architecture on the dynamic behaviors of the composites. The damage mechanisms at elevated temperatures were studied. Results show that the impact resistance of the 3D angle‐interlock woven composites degraded at the glassy region of the epoxy resin, then enhanced at the glass transition temperature (Tg), this phenomenon became more pronounced in the warp direction. Such behavior should be ascribed to the improved toughness and ductility of the resin matrix. The local plastic deformation of resin before damage slowed down matrix cracking and composites failure. Further, the reinforcement play a key role in the adiabatic heating and plastic deformation of the composites at high temperature. Highlights The impact test of 3D woven composites was conducted at elevated temperatures. The high temperature significantly affects the dynamic properties of composites. The increased toughness and plasticization of resin diminished impact damage. A mesoscale thermo‐mechanical coupled finite element model was developed. The reinforcement plays a key role in the damage process and adiabatic heating.

High velocity impact tests on high temperature carbon-carbon composites ☆

Tests on impact behaviour of concrete-filled steel tube after exposure to high temperatures

Transverse impacts‐induced deformation and damage of 3D angle‐interlock woven composites at elevated temperatures

Effect of high-temperature environment on the penetration resistance characteristics of carbon fiber/bismaleimide composite laminates

Influence of Temperature on the Impact Behavior of Woven-Ply Carbon Fiber Reinforced Thermoplastic Composites

The behaviour of thermoplastic and thermoset carbon fibre composites subjected to low-velocity and high-velocity impact

Research on high-temperature mechanical behaviour of carbon/phenolic composites under ultra-high heating rates

Perforation of Needle-Punched Carbon-Carbon Composites During High-Temperature and High-Velocity Ballistic Impacts

Compressive experimental method and properties of C/C composites under ultra-high temperature environment

High Speed Impact Properties Of Carbon Fiber/Epoxy Resin Composites

Effects of high temperature and strain rate on the impact-induced inter-laminar shear behavior of plain woven CF/PEEK thermoplastic composites

High-temperature High-Velocity Impact on Honeycomb Sandwich Panels

High-Velocity Impact of Carbon/Epoxy Composite Laminates

Study on Low-Velocity Impact and Residual Compressive Mechanical Properties of Carbon Fiber-Epoxy Resin Composites

The Effect of Fiber Preform Configuration on In-Plane Compressive Behavior of High Porosity Needled Carbon/carbon Composites in Elevated Temperature Environment

Mechanical Behavior of carbon felt-carbon composites under ultra-high temperature

Low-velocity impact behavior of carbon woven laminates after exposure to varying temperatures

Microstructure, Thermophysical Property and Ablation Behavior of High Thermal Conductivity Carbon/carbon Composites after Heat-Treatment

Coupled Effects of High Temperature and Strain Rate on Compressive Properties of Hybrid Fiber UHTCC

Experimental investigation on low‐velocity impact performance of carbon fiber reinforced polyether ether ketone thermoplastic composite materials in room and elevated temperature

Effects of temperature and strain rate on impact compression behaviors of three-dimensional carbon fiber/epoxy braided composites