Abstract:PB‐g‐PS graft copolymer with core‐shell structure was prepared by emulsion polymerization. The matrix toughness was provided by the core phase (PB), while the shell phase (PS) has good compatibility with PPO, which ensured that the core‐shell particles of PB‐g‐PS can be uniformly dispersed in the PPO/PS matrix. It is found that the impact toughness of PPO/PS blends can be effectively improved by controlling the core‐shell ratio of PB‐g‐PS graft copolymer. A series of polybutadiene‐graft‐polystyrene (PB‐g‐PS) graft copolymers with different core–shell ratios (PB/PS) are synthesized using emulsion polymerization. Subsequently, the PB‐g‐PS graft copolymers are blended with polyphenylene oxide (PPO) and polystyrene (PS) to prepare PPO/PS/PB‐g‐PS blends with varying compositions. The effects of the core–shell ratio of PB‐g‐PS graft copolymer and matrix composition on the mechanical properties, micromorphology, and deformation mechanism of the blends are investigated. The results show that the synthesized PB‐g‐PS graft copolymer has extremely high toughening efficiency. The blends with high toughness and excellent processability can be prepared by introducing it and PS into PPO at the same time, and then obtain better end‐use properties and broaden the applications. With the increase of the core‐shell ratio of PB‐g‐PS graft copolymer, the rubber particles gradually gather in the matrix. With an increase of PPO content in the matrix, the rubber particles gradually become uniformly dispersed, the impact strength and yield strength of the blends gradually increase, the coarseness of the impact fracture surface of the blends gradually increase, and massive elongated cavities appear. The blends undergo a brittle ductile transition, and its deformation mechanism change from the initial cracking to shear yielding.

Research on the Effects of MLPB on the Rubber Modification

Regulation of Structure and Mechanical Properties of Poly(propylene-Butene) Alloys by Monomer Composition Switching

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

Phase inversion during bulk copolymerization of N-phenylmaleimide/styrene in presence of polybutadiene (II): Effects of operation conditions and recipes on occurrence of phase inversion and structure of rubber phase

Investigation on Thermo-Rheological Properties and Stability of Sbr Modified Asphalts Containing Palygorskite Clay

Evaluation of the improved properties of SBR/weathered coal modified bitumen containing carbon black

Thermal Behaviour And Improved Properties Of Sbr And Sbr/Natural Bitumen Modified Bitumens

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

Influence of the structure of sub‐micrometer core‐shell rubber particles and matrix composition on the mechanical properties, morphological structure and deformation mechanism of rubber‐modified polyphenylene oxide/polystyrene blends

Dynamic Property of Molybdenum-catalyzed High 1,2-Polybutadiene Rubber

Study of Styrene Butadiene Rubber Reinforced by Polybutadiene Liquid Rubber-Modified Silica

Effect of the Rubber Components on the Mechanical Properties and Braking Performance of Organic Friction Materials

Preparation and Properties Research of Oil-absorbing Rubber

Chemical Modification of Butyl Rubber with Maleic Anhydride via Nitroxide Chemistry and Its Application in Polymer Blends

Polymer Blends of Pbt and Pp Compatibilized by Epoxidized Ethylene Propylene Diene Rubber

Effect of Matrix Composition on the Fracture Behavior of Rubber-Modified Pmma/Pvc Blends

Influence of Core-Shell Particles Structure on the Morphology and Brittle-Ductile Transition of Pbt/Abs-G-Gma Blends

Synergistic Effect of Polycarbonate on Reactive Core-Shell Particles Toughened Poly (butylene Terephthalate)

EPDM with Biochar, Carbon Black, Aramid Pulp and Ionic Liquid-compatibilized Aramid Pulp

Preparation of immiscible XSBR/PAM composite by constructing a leaf vein bionic nano-micro structure

Study on the Abrasion of EPDM Rubblers