Abstract:High resolution displays using ferroelectric liquid crystals (FLCs) driven by a single crystal silicon backplane are a powerful option for many current and future applications. The FLC light-modulating layer is placed on top of a reflective CMOS backplane. This geometry effectively takes advantage of the fast switching speed and high resolution possible in a submicron thick layer of FLC and fine design rules available in standard CMOS fabs. The microsecond FLC switching speeds allow both gray scale and color to be generated with time sequential addressing. In addition, low temperature performance is remarkable ad showing switching in the sub-50 millisecond regime down to -40 degrees C.Current FLC materials operate well with mainstream 5 volt CMOS as well as with newer 3.3V processes. These lower voltages result in lower power consumption and finer design rules allowing for higher density of on-chip electronics such as MPEG2. This option is difficult to achieve in higher voltage processes typical of nematic on VLSI devices. The reflective quarter wave plate design of the display affords a large angular acceptance resulting in flexibility of optical design as well as excellent contrast and throughput vs, viewing angle. We will describe 24 bit color displays and the FLC mixtures optimized for their particular application.

A Submillisecond-Response Liquid Crystal for Color Sequential Projection Displays

16-1:Distinguished Student Paper: A Submillisecond-response Liquid Crystal for Color Sequential Projection Displays

Submillisecond-Response Nematic Liquid Crystals for Augmented Reality Displays

27-1: Submillisecond-Response Nematic LC for Wearable Displays

Submillisecond-response Liquid Crystal for High-Resolution Virtual Reality Displays.

Transflective Ferroelectric Liquid‐crystal Display with a Single‐cell Gap

Liquid crystal cell design of VGA field sequential color LCoS display

Color Sequential Display Based On Stacked Bistable Ferroelectric Lcd

P-140: New Nematic LCD with Submillisecond Response Time

Fast and High-Contrast Liquid-Crystal Shutters with Low Power Consumption Based on an Optical-Mode-Interference Cell

Double Cell Achromatic Ferroelectric Liquid Crystal Displays Using Photoalignment Technology

Double Cells Achromatic Ferroelectric Liquid Crystal Displays

High Performance Liquid Crystals for Vehicle Displays

56-1: High Performance Liquid Crystals for Vehicular Displays

Fast-Response Lcds for Virtual Reality Applications

10.1: A Microsecond‐Response Blue Phase Liquid Crystal Device

P-145: Submillisecond Grayscale Response Time of a Uniform Lying Helix Liquid Crystal

A Microsecond-Response Polymer-Stabilized Blue Phase Liquid Crystal

Flc Displays for High Resolution Magnified View and Projection Applications

Sub-microsecond Electro-Optic Response in Polymer-Stabilized Dual-Frequency Blue Phase Liquid Crystals

Reflective Direct-View Displays Using A Dye-Doped Dual-Frequency Liquid Crystal Gel