Abstract:High resolution displays using ferroelectric liquid crystals (FLCs) driven by a single crystal silicon backplane are a powerful option for many current and future applications. The FLC light-modulating layer is placed on top of a reflective CMOS backplane. This geometry effectively takes advantage of the fast switching speed and high resolution possible in a submicron thick layer of FLC and fine design rules available in standard CMOS fabs. The microsecond FLC switching speeds allow both gray scale and color to be generated with time sequential addressing. In addition, low temperature performance is remarkable ad showing switching in the sub-50 millisecond regime down to -40 degrees C.Current FLC materials operate well with mainstream 5 volt CMOS as well as with newer 3.3V processes. These lower voltages result in lower power consumption and finer design rules allowing for higher density of on-chip electronics such as MPEG2. This option is difficult to achieve in higher voltage processes typical of nematic on VLSI devices. The reflective quarter wave plate design of the display affords a large angular acceptance resulting in flexibility of optical design as well as excellent contrast and throughput vs, viewing angle. We will describe 24 bit color displays and the FLC mixtures optimized for their particular application.

High Performance Liquid Crystals for Vehicle Displays

56-1: High Performance Liquid Crystals for Vehicular Displays

Fast and High-Contrast Liquid-Crystal Shutters with Low Power Consumption Based on an Optical-Mode-Interference Cell

A Submillisecond-Response Liquid Crystal for Color Sequential Projection Displays

Transflective Ferroelectric Liquid‐crystal Display with a Single‐cell Gap

Double Cell Achromatic Ferroelectric Liquid Crystal Displays Using Photoalignment Technology

Submillisecond-Response Nematic Liquid Crystals for Augmented Reality Displays

Low-Temperature Effect On The Liquid-Crystal Response Time Of Mobile Displays

27-1: Submillisecond-Response Nematic LC for Wearable Displays

Study on the Preparation and Performance of an Electrically Controlled Dimming Film with Wide Working Temperature Range

16-1:Distinguished Student Paper: A Submillisecond-response Liquid Crystal for Color Sequential Projection Displays

Difluorovinyl Liquid Crystal Diluters Improve the Electro-Optical Properties of High-∆n Liquid Crystal Mixture for AR Displays

Effect of Different Types of Mesogenic Compounds with Fluorine and Cyano-Group on the Working Temperature of Polymer Dispersed Liquid Crystal Films

Liquid crystal cell design of VGA field sequential color LCoS display

66.1: High Birefringence and Negative Dielectric Anisotropy Liquid Crystal Mixtures for Vertical Alignment Applications

P-152: High Performance Reflective and Transflective Displays Using Guest-Host Liquid Crystal Gels

Simulation of electric-optical properties of homotropic aligned liquid crystal light valves (LCLV)

Submillisecond-response Liquid Crystal for High-Resolution Virtual Reality Displays.

Research of Liquid-Crystal Materials for a High-Performance FFS-TFT Display

Flc Displays for High Resolution Magnified View and Projection Applications

Physical Properties of Chlorinated Liquid Crystals