Abstract:Multi-metal extraction of flue dust from copper smelting is being pursued to meet the increasingly appealing environmental requirements of our modern life. In this paper, the thermodynamic analysis of acid leaching solution was carried out. Ferric arsenate deposits were found in the range of pH = 0∼11.63, in the form of FeAsO4 and FeAsO4∙2H2O. Cu2AsO4OH, CuHAsO4, and Cu5H2(AsO4)4 forms of Cu2AsO4 were produced in the range of pH = 0.98∼2.33. Zn3(AsO4)2, Zn2AsO4OH, ZnHAsO4, and Zn5H2(AsO4)4 forms of zinc arsenate were produced in the range of pH = 1.40∼4.85. Theoretically, when pH = 0.98∼2.33, copper arsenate salt was produced; however, when the actual experimental results were at pH ≥ 1.2, a small amount of copper co-settling occurred. Theoretical results were verified by single factor experiments. Strictly controlling the pH value of the reaction system can effectively separate arsenic (As) from copper (Cu) and zinc (Zn). Through single factor experimentation, optimal process parameters of iron salt and calcium salt combined with As removal were as follows: reaction time, 5 h; reaction temperature, 85 °C; pH value, 1.2; Fe-As molar ratio, 1.5; no H2O2 added. Under these conditions, the precipitation rate of As was 89.12%, while Cu and Zn did not precipitate. Through XRD analysis, As element was removed from acid leaching solution in the form of scorodite (FeAsO4∙2H2O). This has laid a theoretical foundation for the effective removal of As in acid leaching solution and the reduction of As content.

Electrodeposition of As–Sb Alloy from High Arsenic-Containing Solutions

Composition and structure of arsenic–antimony alloy electrodeposited from acidic chloride solution

Effective Removal of Sb(V) from Aqueous Solutions by Electrocoagulation with Composite Scrap Iron-Manganese As an Anode.

Study of in-situ precipitation of arsenic bearing crystalline particles during the process of copper electrorefining

Deep removal of trace arsenic from acidic SbCl 3 solution by in-situ galvanically coupled Cu 2 Sb/Cu particles

Study on the mechanism of copper and arsenic separation in copper smelting acidic solution by arsenic sulfide residue

Boosted direct electrochemical reduction of As(III) from arsenic wastewater via Cu(II)-assisted codeposition on a CuIn alloy electrode

Synthesis of Cu-As Alloys from Simulated Copper Electrolyte by a Controllable Electroplating Method

Non-diaphragm electrodeposition of antimony: Effect of process parameters and precipitating agents

A Novel Method for Rapid and Highly Selective Removal of Arsenic from Copper Electrolyte Using Zirconium Salts

Arsenic Precipitation in Heavily Arsenic‐Doped Czochralski Silicon

Arsenic removal from acid extraction solutions of copper smelting flue dust

Occurrence Behaviors of As/Sb/Bi in Copper Anode Slime and Their Separation by Compound Leaching Followed by Stepwise Precipitation

Comprehensive recovery of arsenic and antimony from arsenic-rich copper smelter dust

An effective separation process of arsenic, lead, and zinc from high arsenic-containing copper smelting ashes by alkali leaching followed by sulfide precipitation

Removal of Sb Impurities in Copper Electrolyte and Evaluation of as and Fe Species in an Electrorefining Plant

Eliminating arsenic impurities from high-purity antimony trioxide through potassium sulfide co-precipitation

Mechanistic insights into the structure-activity relationship of FeS for arsenic removal in strongly acidic wastewater

Efficient and safe disposition of arsenic by incorporation in smelting slag through copper flash smelting process

Eco-utilization of steel slag: Preparation of Fe-based calcium silicate hydrate and its application in As(V) removal

Recovery of antimony from acidic and alkaline leaching solution of low-grade antimony ore by electrowinning process