Abstract:Thin film deposition of solid electrolytes can be useful for the fabrication of better solid-state batteries by reducing the thickness of the electrolyte material to a few hundred nanometers. This facilitates ionic conductance for faster charge-discharge and reduces the total volume of inactive material, therefore increasing energy and power density. Thin film batteries can also be valuable model systems to investigate interface charge dynamics and to serve as playgrounds for interface engineering, without the complexity of bulk systems. Here we investigate the charge transfer properties between the lithium garnet Li 7 La 3 Zr 2 O 12 (LLZO) solid electrolyte and the LiCoO 2 cathode using a thin-film model system, with the aim of reducing the interface resistance and allowing high charge-discharge rates. Bulk LLZO electrolyte has come under the spotlight owing to its high ionic conductivities (10 -4 - 10 -3 S/cm) as well as a wide electrochemical stability window (against metallic lithium anode and high potential cathode materials). We developed a method for fabricating crystalline LLZO thin films using magnetron co-sputtering followed by an annealing step at 700°C (significantly below the standard processing temperatures). The resulting 500 nm-thick Ga-doped LLZO thin films show densities and ionic conductivities (2×10 -4 S/cm) comparable to the values observed in bulk ceramic pellets.[1] Based on this thin film fabrication process, we fabricated an all-thin-film model system to investigate the LLZO / LCO cathode interface. This architecture provides an easy access to the interface for characterization, allowing one to identify the degradation processes taking place at the interface under high-temperature co-sintering. Introducing an in situ-lithiated Nb 2 O 5 diffusion barrier at the interface, it was possible to lower the LLZO / LCO charge transfer resistance to about 50 Ω cm 2 , a 3-fold reduction with respect to previously reported values. The low interfacial resistance combined with the high conductance through the LLZO thin-film electrolyte allows charge transfer at high charge–discharge rates up to 40 C (0.9 mA/cm 2 ).[2] References [1] Sastre, Jordi, et al. "Lithium Garnet Li7La3Zr2O12 Electrolyte for All‐Solid‐State Batteries: Closing the Gap between Bulk and Thin Film Li‐Ion Conductivities." Advanced Materials Interfaces (2020): 2000425. [2] Sastre, Jordi, et al. "Fast Charge Transfer across the Li7La3Zr2O12 Solid Electrolyte/LiCoO2 Cathode Interface Enabled by an Interphase-Engineered All-Thin-Film Architecture." ACS Applied Materials & Interfaces 12.32 (2020): 36196-36207.

Reduction of charge-transfer resistance at the solid electrolyte – electrode interface by pulsed laser deposition of films from a crystalline Li 2 PO 2 N source

A Solid-State Electrolyte Lithium Phosphorus Oxynitride Film Prepared by Pulsed Laser Deposition

Studies on lithium phosphorous oxynitride electrolyte thin films and a new all-solid-state thin film lithium battery

High-voltage LiNi0.5Mn1.5O4 Thin Film Cathodes Stabilized by LiPON Solid Electrolyte Coating to Enhance Cyclic Stability and Rate Capability

A free-standing lithium phosphorus oxynitride thin film electrolyte promotes uniformly dense lithium metal deposition with no external pressure

Elucidating Interfacial Stability between Lithium Metal Anode and Li Phosphorus Oxynitride via In Situ Electron Microscopy

Freestanding LiPON: from Fundamental Study to Uniformly Dense Li Metal Deposition Under Zero External Pressure

Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

Influence of LiPON thickness on the electro-optical performance of inorganic all-solid-state electrochromic devices

Electrical insulation properties of RF-sputtered LiPON layers towards electrochemical stability of lithium batteries

Functional multilayer solid electrolyte films for lithium dendrite suppression

An amorphous LiCo1/3Mn1/3Ni1/3O2 thin film deposited on NASICON-type electrolyte for all-solid-state Li-ion batteries

An ultrathin solid-state electrolyte film coated on LiNi0.8Co0.1Mn0.1O2 electrode surface for enhanced performance of lithium-ion batteries

A Nanocrystalline Nio Thin-Film Electrode Prepared by Pulsed Laser Ablation for Li-Ion Batteries

Inhibitory property of lithium phosphorus oxynitride surface grown by atomic layer deposition

Fabrication of Solid-State Thin-Film Batteries Using LiMnPO4 Thin Films Deposited by Pulsed Laser Deposition

Conformal High-Aspect-Ratio Solid Electrolyte Thin Films for Li-Ion Batteries by Atomic Layer Deposition

Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers

Improved electrochemical performance and chemical stability of thin-film lithium phosphorus oxynitride electrolyte by appropriate fluorine plasma treatment

An ultrathin solid-state electrolyte film coated on LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> electrode surface for enhanced performance of lithium-ion batteries

Fast Charge Transfer between LLZO Solid Electrolyte and LCO Cathode Thin Films with a Modified Interface