Abstract:Biofuel is an eco-friendly fuel that can reduce CO 2 emissions by 65% compared to using petroleum-based fuels. The commercialized biodiesel, which contains oxygen atom within its molecules, is only used in blends with petroleum-based diesel, but renewable diesel, diesel-like hydrocarbons, can completely substitute petroleum-based fuels. However, in the deoxygenation process to produce renewable diesel and jet fuel, solvents are injected to enhance the physical properties of reactants and the supply of hydrogen, thereby increasing the process expenditure. Therefore, in this review, the research results published over the past 10 years regarding the production of renewable fuels under solvent-free conditions have been critically reviewed. The effects of feedstocks, atmospheric conditions (type of gas and pressure), reaction temperature/time, catalyst type and its loading on the reaction mechanism and catalytic performance are carefully compared. Fatty acids and triglycerides require deoxygenation reactions, while furan compounds necessitate not only deoxygenation but also aldol condensation reactions to produce renewable biofuel. Higher H 2 pressure and reaction temperature can enhance the reaction activity, but these parameters should be optimized while considering the process cost and side reactions. Noble metal catalysts have been reported to exhibit high deoxygenation activity, but for economic reasons, non-noble transition metals are being widely investigated. Ni is the most commonly used catalysts, and the deoxygenation mechanism varies depending on the acidity and type of acid sites on the catalyst. The feasibility of biofuels produced by solvent-free deoxygenation is assessed by comparing fuel properties with commercial diesel and jet fuel.

Recent Advances for the Production of Hydrocarbon Biofuel Via Deoxygenation Progress

Dilemma and Strategies for Production of Diesel-Like Hydrocarbons by Deoxygenation of Biomass-Derived Fatty Acids

A Review on the Catalytic Hydrodeoxygenation of Lignin-Derived Phenolic Compounds and the Conversion of Raw Lignin to Hydrocarbon Liquid Fuels

Recent advancement in deoxygenation of fatty acids via homogeneous catalysis for biofuel production

Cost-effective Routes for Catalytic Biomass Upgrading

Hydrogenolysis and Hydrodeoxygenation of Lignin in a Two-Step Process to Produce Hydrocarbons and Alkylphenols

Review on the production of renewable biofuel: Solvent-free deoxygenation

Recent Progress in Hydrodeoxygenation of Biomass-based Oxygenates

Recent advances on catalytic deoxygenation upgrading of liquefaction microalgae bio oil

Deoxygenation of fatty acid to produce diesel-like hydrocarbons: A review of process conditions, reaction kinetics and mechanism

Recent Advances in Novel Catalytic Hydrodeoxygenation Strategies for Biomass Valorization without Exogenous Hydrogen Donors—A Review

Advances and Perspectives of Bio-oil Hydrotreatment for Biofuel Production

Recent Progress on Bimetallic Catalysts for the Production of Fuels and Chemicals from Biomass and Plastics by Hydrodeoxygenation

Recent advances in one-stage conversion of lipid-based biomass-derived oils into fuel components - aromatics and isomerized alkanes

Recent progress in catalytic deoxygenation of biomass pyrolysis oil using microporous zeolites for green fuels production

Catalytic hydrodeoxygenation of pyrolysis bio-oil to jet fuel: A review

A review of hydrodeoxygenation of bio-oil: model compounds, catalysts, and equipment

Recent advances in heterogeneous catalytic hydrodeoxygenation of biomass-derived oxygenated furanics mediated by formic acid

Research Advances of Catalysts for the Hydrodeoxygenation of Oxygenic Compounds

A Comprehensive Review of Experimental Parameters in Bio-oil Upgrading from Pyrolysis of Biomass to Biofuel Through Catalytic Hydrodeoxygenation

Hydrogen-free deoxygenation of oleic acid on acidic and basic ZSM-5 and Y-zeolites: products for biofuel and reaction pathways