Abstract:Lithium metal is considered as a potential anode for lithium batteries, but its commercialization process is hindered by several problems, including uncontrollable lithium dendrite growth, large volume expansion, low utilization of lithium and so on. To address these issues, in this work, lithiophilic silver layers with 80 nm thickness are coated on the commercial carbon cloth (CC) using thermal evaporation method to regulate Li growth during lithium plating process. We find that the uniformly distributed silver layers can successfully reduce lithium nucleation over-potential, thus inducing the homogeneous deposition of metal Li, supported by density functional theory calculation. Benefited from the as prepared lithiophilic Ag layers, the CC/Ag/Li anode with an ultrahigh areal capacity of 16 mAh cm(-2) is achieved adopting electrochemical deposition at 0.2 mA cm(-2) without the formation of lithium dendrites, which is confirmed by continuous detection using visual discrimination and scanning electron microscope observation. As a result, a stable dendrite-free CC/Ag/Li anode exhibits excellent electrochemical properties: (1) the assembled CC/Ag/Li symmetrical cell maintains a stable voltage hysteresis within 25 mV after cycling 750 hat a current density of 1 mA cm(-2); (2) The assembled CC/Ag/Li-LiFePO4 cell also demonstrates enhanced electrochemical behaviors in terms of rate performance and capacity retention; (3) When coupled with a carbon/sulfur cathode, the CC/Ag/Li anode also demonstrates excellent compatibility. The initial discharge capacity of the CC/Ag/Li-S cell is 899.3 mAh g(-1) at 0.2C, the reversible capacity retains a value of 587.7 mAh g(-1) after 400 cycles, corresponding to a capacity attenuation rate of 0.075% per cycle.

Dendrite-free Sandwiched Ultrathin Lithium Metal Anode with Even Lithium Plating and Stripping Behavior

Self-Adaptive and Electric Field-Driven Protective Layer with Anchored Lithium Deposition Enable Stable Lithium Metal Anode

Li metal coated with Li3PO4 film via atomic layer deposition as battery anode

An Interconnected Silver Coated Carbon Cloth Framework As a Host to Reduce Lithium Nucleation Over-Potential for Dendrite-Free Lithium Metal Anodes

Polylatic Acid Nanofiber-Guided Uniform Lithium Deposition for Stable Lithium Metal Anodes

Dendrites‐Free Lithium Metal Anode Enabled by Synergistic Surface Structural Engineering

LiCoO 2 Ultrathin Layer for Uniform Lithium Deposition toward a Highly Stable Lithium Metal Anode

Endowing Cu Foil Self-Wettable in Molten Lithium: A Roll-to-Roll Wet Coating Strategy to Fabricate High-Performance Ultrathin Lithium Metal Anodes

Improving Li Anode Performance by a Porous 3D Carbon Paper Host with Plasma Assisted Sponge Carbon Coating

Artificial Soft–Rigid Protective Layer for Dendrite‐Free Lithium Metal Anode

Suppressing Dendrite Growth of a Lithium Metal Anode by Modifying Conventional Polypropylene Separators with a Composite Layer

Ultrathin LiF-rich solid electrolyte interphase for stable long-life cycling stabilization of lithium metal anodes

Ultra-thin and ultra-light self-lubricating layer with accelerated dynamics for anode-free lithium metal batteries

In Situ Formed Tribofilms as Efficient Organic/Inorganic Hybrid Interlayers for Stabilizing Lithium Metal Anodes

A lithiophilic and conductive interlayer for dendrite-free lithium metal anodes

Sandwiched Li plating between Lithiophilic-Lithiophobic gradient Silver@Fullerene interphase layer for ultrastable lithium metal anodes

Guiding Smooth Li Plating and Stripping by a Spherical Island Model for Lithium Metal Anodes

Interfacial friction enabling ≤ 20 μm thin free-standing lithium strips for lithium metal batteries

A facile surface chemistry route to a stabilized lithium metal anode

Robust Metallic Lithium Anode Protection by the Molecular‐Layer‐Deposition Technique

Straw-Brick-Like Carbon Fiber Cloth/Lithium Composite Electrode as an Advanced Lithium Metal Anode