Abstract:To eliminate a few specific elements from highly active liquid waste (HLW), two macroporous silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide (TODGA) and octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) impregnated polymeric composites, TODGA/SiO2-P and CMPO/SiO2-P, were synthesized. It was done by an advanced vacuum sucking technique through impregnation of the chelating agents into the pores of SiO2-P particles support. The partitioning of Sr(II), Pd(II), Zr(IV), Mo(VI), and Cs(I) from a 3.0M HNO3 solution containing some typically simulated fission and non-fission products Ru(III), Rb(I), Fe(III), Na(I), K(I), and Ba(II) was performed at 298 and 323K, respectively. In the first column packed with TODGA/SiO2-P, Sr(II), Pd(II), and Zr(IV) were adsorbed and eluted effectively by 0.01M HNO3, 0.05M DTPA-pH 2.5, and 0.5M oxalic acid, respectively, while others showed very weak or almost no adsorption and flowed into effluent along with 3.0M HNO3. Cs(I), Fe(III), and Mo(VI) containing effluent was then applied to the second column packed with CMPO/SiO2-P. Fe(III) and Mo(VI) were found to be adsorbed together and eluted utilizing 0.05M DTPA-pH 2 at 323K. The effective partitioning of Fe(III) was of great benefit to the evaporation, concentration, and finally geological disposal of HLW. The separation of Sr(II) and Mo(VI) was useful for the vitrification of HLW due to the Sr heat generator property and low solubility of Mo oxides in molten glass materials. Cs(I) can be separated by a novel silica-based 1,3-[(2,4-diethyl-heptylethoxy)oxy]-2,4-crown-6-calix[4]arene (Calix[4]arene-R14) impregnated polymeric composite (Calix[4]arene-R14/SiO2-P). In terms of the results obtained, a highly specific partitioning process of Fe(III) and some specific fission products Sr(II), Pd(II), Zr(IV), Cs(I), and Mo(VI) from a simulated HLW by extraction chromatography was proposed.

Extraction Chromatography–electrodeposition(ec–ed) Process to Recover Palladium from High-Level Liquid Waste

Development of Palladium Separation Process from Nitric Acid Medium Utilizing a New Hybrid Multi-Nitrogen Adsorbent

Palladium Removal from the Simulated Nuclear Spent Fuel Solution Using a Silica‐Based SiPyR‐N3 Anion Exchanger

Synthesis of a Macroporous Silica‐based Derivative of Pyridine Material and Its Application in Separation of Palladium

Minor Actinides Partitioning: Uptake of Palladium with Triazine-Containing Adsorbent under the Framework of Spmp Process

Preparation of A Macroporous Silica-Based Multidentate Soft-Ligand Material and Its Application in the Adsorption of Palladium and the Others

Removal of Pd(II), Zr(IV), Sr(II), Fe(III), and Mo(VI) from simulated high level liquid waste by extraction chromatography utilizing the macroporous silica-based polymeric materials

Feasibility Studies on the Selective Separation of Fission Palladium(ii) by Isohex-Btp/sio2-p Adsorbent from HLLW

Efficient separation of palladium from high-level liquid waste with novel adsorbents prepared by sulfhydryl organic ligands containing imidazole, thiazole and oxazole composited with XAD7HP

Precise Separation and Efficient Recovery of Pd(II) from High-Level Liquid Waste by XAD-based Adsorbents

Recovery of Palladium by Silica/polymer-Based 2,6-Bis(5,6,7,8-tetrahydro-5,8,9,9-tetramethyl-5,8-methano-1,2,4-benzotriazin-3-yl)pyridine Adsorbents from High Level Liquid Waste

Extraction and separation of Pd(II) by N, N'-diethyl-N, N'-dicyclohexylmalonamide in a nitric acid system

Electrochemical Recycling of Pd and Ag from Simulated High-Level Liquid Waste

Efficient separation of palladium from nitric acid solution by a novel silica-based ion exchanger with ultrahigh adsorption selectivity

Precise recognition and efficient recovery of Pd(II) from high-level liquid waste by a novel aminothiazole-functionalized silica-based adsorbent

Preparation of a Novel Silica-Based N-donor Ligand Functional Adsorbent for Efficient Separation of Palladium from High Level Liquid Waste

Selective Extraction of Silver and Palladium in Leachate Based on EDTA Complexation: Electrodeposition, Nucleation Mechanism, and Kinetic Analysis

Highly efficient and selective adsorption of palladium(II) from simulated nuclear waste solution using Amberlite XAD-7 resin impregnated with a phenanthroline-derived diamide

Extraction of Palladium from Spent Nuclear Fuel Reprocessing Solutions

Selective Separation of Pd(II) Through Ion Exchange and Oxidation-Reduction with Hexacyanoferrates from High-Level Liquid Waste

Separation of Pd and Pt from highly acidic leach liquor of spent automobile catalysts with monothio-Cyanex 272 and trioctylamine