Abstract:This study investigates the aerodynamic performance of a low-pressure turbine, namely the T106C, by large eddy simulation (LES) and coarse grid direct numerical simulation (CDNS) at a Reynolds number of 100,000. Existing experimental data were used to validate the computational fluid dynamics (CFD) tool. The effects of subgrid scale (SGS) models, mesh densities, computational domains and boundary conditions on the CFD predictions are studied. On the blade suction surface, a separation zone starts at a location of about 55% along the suction surface. The prediction of flow separation on the turbine blade is always found to be difficult and is one of the focuses of this work. The ability of Smagorinsky and wall-adapting local eddy viscosity (WALE) model in predicting the flow separation is compared. WALE model produces better predictions than the Smagorinsky model. CDNS produces very similar predictions to WALE model. With a finer mesh, the difference due to SGS models becomes smaller. The size of the computational domain is also important. At blade midspan, three-dimensional (3D) features of the separated flow have an effect on the downstream flows, especially for the area near the reattachment. By further considering the effects of endwall secondary flows, a better prediction of the flow separation near the blade midspan can be achieved. The effect of the endwall secondary flow on the blade suction surface separation at the midspan is explained with the analytical method based on the Biot–Savart Law.

Calculations of Massive Separation Around Landing-Gear-like Geometries

Numerical Prediction of Massive Separation Unsteady Flows Around Bluff-Bodies

Numerical Investigation of Massively Separated Flows Past RLG Using Advanced DES Approaches

Large Eddy Simulation and CDNS Investigation of T106C Low-Pressure Turbine

Investigation of Flows Around A Rudimentary Landing Gear with Advanced Detached-Eddy-Simulation Approaches

Constrained Large-Eddy Simulation and Detached Eddy Simulation of Flow Past a Commercial Aircraft at 14 Degrees Angle of Attack

Numerical simulations of the near-field flows past cylinders in tandem arrangements

Simulations of Complex Turbulent Flows with RANS-LES Hybrid Approaches

NUMERICAL PREDICTION OF MASSIVE SEPARATION AND UNSTEADY FLOWS AROUND BLUFF-BODIES

Study of Transonic Separated Flows with zonal-DES Based on Weakly Non-linear Turbulence Model

Three-Dimensional Flow Around Two Tandem Circular Cylinders with Various Spacing at Re=220

RANS calculation and DES analysis of massively separated flows for six typical vehicles

Simulation of Flows Around Two Tandem Rotating Cylinders in a Channel Using LB-DF/FD Method

Numerical study of separation flows with LES/RANS hybrid appoaches

Prediction of Separation Flows Around a 6:1 Prolate Spheroid Using RANS/LES Hybrid Approaches

Numerical Dissipation Effects on Massive Separation Around Tandem Cylinders

Unsteady Flow Around Two Tandem Cylinders Using Advanced Turbulence Modeling Method

Simultaneous Simulation of Transition and Massive Separation by RANS-LES-Tr Model

Simulation of separation flows with RANS/LES hybrid methods

Large-Eddy and Detached-Eddy Simulations of the Separated Flow Around a Circular Cylinder

Numerical Simulation for Flow Over two Circular Cylinders in Side-by-side Arrangement with Lattice Boltzmann Method