Abstract:Gas metal arc welding (GMAW) is widely used in various industries, such as automotive and heavy equipment manufacturing, because of its high productivity and speed, with solid wires being selected based on the mechanical properties required for welded joints. GMAW consists of various components, among which consumables such as the contact tip and continuously fed solid wire have a significant impact on the weld quality. In particular, the copper-plating method can affect the conductivity and arc stability of the solid wire, causing differences in the continuous welding performance. This study evaluated the welding performance during 60 min continuous GMAW using an AWS A5.18 ER70S-3 solid wire, which was copper-plated using chemical plating (C-wire) and electroplating (E-wire). The homogeneity and adhesion of the copper-plated surface of the E-wire were superior to those of the C-wire. The E-wire exhibited better performance in terms of arc stability. The wear rate of the contact tip was approximately 45% higher when using the E-wire for 60 min of welding compared with the C-wire, which was attributed to the larger variation rate in the cast and helix in the E-wire. Additionally, the amount of spatter adhered to the nozzle during 60 min, with the E-wire averaging 5.9 g, approximately half that of the C-wire at 12.9 g. The E-wire exhibits superior arc stability compared with the C-wire based on the spatter amount adhered to the nozzle. This study provides an important reference for understanding the impact of copper plating methods and wire morphology on the replacement cycles of consumable welding parts in automated welding processes such as continuous welding and wire-arc additive manufacturing.

A Study on Sidewall Penetration of Cable-Type Welding Wire Electrogas Welding

Research on the sidewall penetration mechanisms of cable-type welding wire narrow gap GMAW process

Cable-type Welding Wire Arc Welding

A Study on the Mechanisms of the CWW SAW Process

Arc Properties and Droplet Transfer Characteristics in Cable-Type Welding Wire Electrogas Welding

Numerical simulation for dynamic behavior of molten pool in cable-type welding wire GAMW

Arc Behavior and Droplet Transfer of CWW CO2 Welding

Arc Ignition of CWW CO2 Welding in A36 Steel

Effect of Forces on Dynamic Metal Transfer Behavior of Cable-Type Welding Wire Gas Metal Arc Welding

Effect of polarities and shielding gases in CWW GMAW

Arc Heat Distribution in Cable-Type Welding Wire Submerged Arc Surfacing

Influence of Interwire Distance and Arc Length on Welding Process and Defect Formation Mechanism in Double-Wire Pulsed Narrow-Gap Gas Metal Arc Welding

An Innovative Methodology in Narrow Gap GTAW for Alternating Magnetic Field with Synchronous Swing of Filler Wire and Arc

Energy reconstruction and metallurgical characteristics in 316L NG-LWFW with assisted wire wobbling by numerical and experimental analysis

Thick-wire swing arc narrow gap GMA welding assisted by pre-embedding cold wires

Study on the Molten Pool Fluid Behavior of PAW-Cable-Type Seven-Wire GMAW Hybrid Welding

Numerical simulation on molten pool behavior of narrow gap gas tungsten arc welding

Study on Arc Behavior and Weld Formation of Magnetically Controlled Narrow Gap TIG Welding

Experimental Investigation of Integrated Circular Triple-Wire Pulse GMAW of Q960E High-Strength Steel for Construction Machinery

Evaluation of Continuous GMA Welding Characteristics Based on the Copper-Plating Method of Solid Wire Surfaces

Understanding of the Weld Pool Convection in Twin-Wire GMAW Process