Abstract:Green corrosion inhibitors have an important role in reducing the corrosion rate of metals and the effects of toxic chemicals in the environment. In this study, the inhibition effect of pomegranate peel extract ( PPE ) with concentration of 0.5, 1, 1.5, 2, 2.5 and 3 g/L on the aluminum 1050 alloy corrosion behavior in the nitric acid solution investigates using the weight loss, electrochemical techniques, scanning electron microscope ( SEM ), atomic force microscope ( AFM ), contact angle images, gas chromatography-mass spectrometer ( GC-MS ) analysis, fourier transform Infrared spectroscopy ( FTIR ) and ultraviolet radiation ( UV-IR ). And, the ( UV-IR ), ( GC-MS ), and FTIR results confirm the presence of many organic compounds (Containing the N , S , and O atoms), which are responsible for inhibitor performance and absorption phenomena. Meanwhile, the electrochemical impedance results ( EIS ) indicate that the double layer capacity decreases and the corrosion resistance (Corrosion current density ( i corr ) from 0.128 to 0.009 mA/cm 2 ) increases with the increase of the inhibitor concentration (The inhibition efficiency increased with increasing the inhibitor concentration from % 54.29 to the % 92.58 at (1 to 3 g/L ). In addition, the corrosion current density decreases with the increase of the inhibitor concentration using the potentiodynamic polarization ( PDP ) test. However, the corrosion rate enhances with increasing the temperature. From the other hand, quantum chemical ( QC ) calculation and molecular dynamics ( MD ) simulation perform to investigate the theory of the adsorption mechanism. According to these studies, the adsorption of PPE on the aluminum 1050 alloy surface is agreement with the langmuir isotherm and as a result it is a mixed-type inhibitor. In final the SEM and AFM results show that the corrosion rate of the aluminum 1050 alloy surface is significantly reduced after the addition of the inhibitor to the corrosive environment. Furthermore, the contact angle image shows that the inhibited aluminum surface has a hydrophobic property in an aqueous solution. And, the QC calculation and MD simulation clarify well the thin layer formation due to the good adsorption of inhibitor (PPE) on the surface of aluminum 1050 alloy in the nitric acid solution, theoretically. It is concluded that PPE will inhibit the surface of aluminum against the corrosion agents in acidic environment and can use as a green inhibitor.

Electrochemical Behavior and Computational Analysis of Phenylephrine for Corrosion Inhibition of Aluminum in Acidic Medium

Detailedexperimental and computational explorations of two heterocyclic compounds as corrosion inhibitors for aluminum alloy 2024-T3 in 3.5% NaCl: Electrochemical/surface studies, DFT/MD modeling

Weight Loss, Thermodynamics, SEM, and Electrochemical Studies on N-2-Methylbenzylidene-4-antipyrineamine as an Inhibitor for Mild Steel Corrosion in Hydrochloric Acid

Some Phthalocyanine and Naphthalocyanine Derivatives as Corrosion Inhibitors for Aluminium in Acidic Medium: Experimental, Quantum Chemical Calculations, QSAR Studies and Synergistic Effect of Iodide Ions

Investigation of Thermodynamic Parameters for Steel Corrosion in Acidic Solution in the Presence of N,N′-Bis(phloroacetophenone)-1,2 propanediamine

Electrochemical and DFT insights into 2-amino-4-(4-hydroxy-3-methoxyphenyl)-7-methyl-4 H-chromene-3-carbonitrile: an innovative strategy for antibacterial activity and corrosion protection of carbon steel

Investigating the corrosion inhibition of aluminium by diamine derivatives in hydrochloric acid: a multi-technique approach

Corrosion resistance of aluminum against acid activation in 1.0 M HCl by symmetrical ball - type zinc phthalocyanine

Corrosion Inhibition of Aluminum Alloy in 50% Ethylene Glycol Solution

Electrochemical and Quantum Chemical Studies of Azoles As Corrosion Inhibitors for Mild Steel in Hydrochloric Acid

Two α-aminophosphonics acids as corrosion inhibitors for carbon steel in 0.5 M HCl: Electrochemical and DFT/MD simulation.

Inhibitive performance of dapoxetine drug for corrosion of aluminum alloy (AA6063) in acidic and alkaline solutions: experimental and theoretical studies using Materials Studio v7.0

Adsorption Mechanism, Kinetics, Thermodynamics, and Anticorrosion Performance of a New Thiophene Derivative for C-Steel in a 1.0 M HCl: Experimental and Computational Approaches

Corrosion inhibition abilities of phytochemicals: a combined computational studies

Novel organoselenium-based N-mealanilic acids as efficacious corrosion inhibitors for 6061 aluminum alloy in molar HCl: In-silico modeling, electrochemical, and surface morphology studies

Electrochemical and theoretical investigations of favipiravir drug performance as ecologically benign corrosion inhibitor for aluminum alloy in acid solution

Valorizing the potential of saffron petals extract for aluminium corrosion control: An integrated approach involving extraction, experimental and computational analysis

Electrochemical behavior and theoretical studies of arylazo (1-naphthyl-2-cyanoacetamide) derivatives as new corrosion inhibitors for Inconel 800 in chloride solution

Experimental and theoretical insights on the adsorption and inhibition mechanism of (2E)-2-(acetylamino)-3-(4-nitrophenyl) prop-2-enoic acid and 4-nitrobenzaldehyde on mild steel corrosion

Corrosion Inhibitor Screening For Aa6014 Aluminum Alloy Under Different Ambient Conditions Using A Novel Multielectrode Methodology

A study of pomegranate peel extract effect on corrosion inhibition performance on aluminum in HNO 3 solution