Abstract:Friction or lubrication process is a typical process of the energy dissipation. It can be reasonably described and speculated by using the entropy increase and dissipative structure theory of the non-equilibrium thermodynamics. In this paper, we model and analyze the typical thin-film lubrication mechanism based on the theory of thermodynamics, by using the interfacial disjoining pressure to characterize the dominant role of the solid-lubricant interaction on a microscale and establishing the lubrication Stribeck curve based on thermodynamic concepts. The concept of entropy production is adopted to describe the lubrication system, which is defined as the sum of multiplications of the thermodynamic forces and flows. Then the variations and the competing relations between the pairs of thermodynamic forces and flows could be used to reveal the different factors dominated in the lubrication system, such as the solid-liquid interaction, the sliding velocity, and the normal load. In this paper, we assume that all the dissipated energy caused by the viscous resistance of lubricant is converted into heat, then the total entropy increase per surface area at the frictional interface is considered, affected by interfacial disjoining pressure and the one-dimensional heat flow. With the entropy increasing analysis of lubrication process, we find that when the entropy production in the steady state becomes minimum, the total energy dissipation due to friction also becomes minimum, which directly indicates the lowest friction coefficient point at the lubrication Stribeck curve. Moreover, when a lubrication system loses its stability slightly from the equilibrium state, self-organization may occur at the solid-lubricant interface, thus resulting in partially ordering interfacial structures, which may indicate the interfacial structures when tribosystem turns from hydrodynamic lubrication phase into thin-film lubrication phase. In the experimental aspect, the location of the lowest friction coefficient point at the Stribeck curve has a very good correspondence to the minimum entropy point predicted by our thermodynamic model, and the lubrication transition process from hydrodynamic phase to thin-film phase can be explained quite well by the theory of dissipative structures when the system loses its stability. Furthermore, a calculation model of the friction coefficient for thin-film lubrication is obtained when considering the dominant contribution of the solid-lubricant interfacial interaction through an equivalent force method. The calculation data correspond well to the experimental results. In summary, thermodynamic model could effectively characterize the lubrication process in mechanism by revealing the involved multi-scale effect, multi-physical effect and nonlinear coupling effect.

A Novel Thermodynamic Model for Obtaining Solid–Liquid Interfacial Energies

A Novel Equivalent Agglomeration Model for Heat Conduction Enhancement in Nanofluids

Solid−Liquid Interfacial Energy and Melting Properties of Nickel under Pressure from Molecular Dynamics

Close-contact Melting of Shear-Thinning Fluids

The solid–liquid interface energy of organic crystals

Calculation of Solid–liquid Interfacial Free Energy and Its Anisotropy in Undercooled System

A thermodynamically consistent and conservative diffuse-interface model for gas-liquid-solid multiphase flows

Multi-Scale Gas-Liquid Interfacial Model

Multi-Scale Modeling of the Gas-Liquid Interface Based on Mathematical and Thermodynamic Approaches~!2009-11-08~!2010-03-22~!2010-05-17~!

Study of the Temperature Effects on Solid-Liquid Anisotropic Interfacial Energy

Solid-liquid interfacial free energy from computer simulations: Challenges and recent advances

A thermodynamic and analytical description on the quantitative phase-field model with enhanced interface diffusivity

Estimating Fluid-solid Interfacial Free Energies for Wettabilities: A Review of Molecular Simulation Methods

A quantitative theory and atomistic simulation study on the soft-sphere crystal-melt interfacial properties. I. Kinetic coefficients

Interface-resolved simulation of solid-liquid phase change with thermal convection using discrete unified gas kinetic scheme

Thermodynamic phase-field model for microstructure with multiple components and phases: The possibility of metastable phases

Mechanical and thermodynamic routes to the liquid-liquid interfacial tension and mixing free energy by molecular dynamics

Modeling Cohesive Energy and Melting Temperature of Nanocrystals

An intermolecular interaction based constitutive model for non-crystalline phase of solid materials

Size dependent interface energy and its applications

Thermodynamic Analysis of Lubrication Considering Solid-Liquid Interface Interaction