Abstract:Amorphous thermoplastic polymers are important engineering materials; however, their non-linear, strongly temperature- and rate-dependent elastic-viscoplastic behavior is still not very well understood, and is modeled by existing constitutive theories with varying degrees of success. There is no generally agreed upon theory to model the large-deformation, thermo-mechanically-coupled, elastic-viscoplastic response of these materials in a temperature range which spans their glass transition temperature. Such a theory is crucial for the development of a numerical capability for the simulation and design of important polymer processing operations, and also for predicting the relationship between processing methods and the subsequent mechanical properties of polymeric products. In this paper we extend our recently published theory [Anand, L., Ames, N. M., Srivastava, V., Chester, S. A., 2009. A thermo-mechanically-coupled theory for large deformations of amorphous polymers. Part I: formulation. International Journal Plasticity 25, 1474–1494; Ames, N. M., Srivastava, V., Chester, S. A., Anand, L., 2009. A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part II: applications. International Journal of Plasticity 25, 1495–1539] to fill this need.We have conducted large strain compression experiments on three representative amorphous polymeric materials – a cyclo-olefin polymer (Zeonex-690R), polycarbonate (PC), and poly(methyl methacrylate) (PMMA) – in a temperature range from room temperature to approximately 50°C above the glass transition temperature, ϑg, of each material, in a strain-rate range of ≈10-4 to 10-1s-1, and compressive true strains exceeding 100%. We have specialized our constitutive theory to capture the major features of the thermo-mechanical response of the three materials studied experimentally.We have numerically implemented our thermo-mechanically-coupled constitutive theory by writing a user material subroutine for a widely used finite element program. In order to validate the predictive capabilities of our theory and its numerical implementation, we have performed the following validation experiments: (i) a plane-strain forging of PC at a temperature below ϑg, and another at a temperature above ϑg; (ii) blow-forming of thin-walled semi-spherical shapes of PC above ϑg; and (iii) microscale hot-embossing of channels in Zeonex and PMMA above ϑg. By comparing the results from this suite of validation experiments of some key features, such as the experimentally-measured deformed shapes and the load-displacement curves, against corresponding results from numerical simulations, we show that our theory is capable of reasonably accurately reproducing the experimental results obtained in the validation experiments.

An intermolecular interaction based constitutive model for non-crystalline phase of solid materials

A Constitutive Model for Strain Hardening Behavior of Predeformed Amorphous Polymers: Incorporating Dissipative Dynamics of Molecular Orientation

A Thermodynamic-Consistent Model for the Thermo-Chemo-Mechanical Couplings in Amorphous Shape-Memory Polymers

A Finite Deformation Fractional Viscoplastic Model for the Glass Transition Behavior of Amorphous Polymers

A finite strain micromechanical-based constitutive model: Application to porous polycrystal

A new effective phenomenological constitutive model for semi‐crystalline and amorphous polymers

On a new class of non-Gaussian molecular-based constitutive models with limiting chain extensibility for incompressible rubber-like materials

A simple interpolation-based approach towards the development of an accurate phenomenological constitutive relation for isotropic hyperelastic materials

Physics-informed Data-driven Discovery of Constitutive Models with Application to Strain-Rate-sensitive Soft Materials

A data-driven constitutive model for porous elastomers at large strains

A thermodynamically-based constitutive theory for amorphous glassy polymers at finite deformations

Thermodynamic considerations on a class of dislocation-based constitutive models

A hyperelastic constitutive model for soft elastomers considering the entanglement-dependent finite extensibility

Thermomechanical Modeling of Microstructure Evolution Caused by Strain-Induced Crystallization

A thermo-mechanically coupled constitutive model for semi-crystalline polymers at finite strains: Mechanical and thermal characterization of polyamide 6 blends

A size-dependent ductile fracture model: Constitutive equations, Numerical implementation and Validation

Anisotropic Continuum-Molecular Models: A Unified Framework Based on Pair Potentials for Elasticity, Fracture and Diffusion-Type Problems

A micro-mechanical constitutive model for heterogeneous rocks with non-associated plastic matrix as implicit standard materials

A physically-based constitutive model for amorphous glassy polymers in large deformations

A physically based visco-hyperelastic constitutive model for soft materials

A thermo-mechanically-coupled large-deformation theory for amorphous polymers in a temperature range which spans their glass transition