Abstract:Satisfactory ionic conductivity, excellent mechanical stability, and high-temperature resistance are the prerequisites for the safe application of solid polymer electrolytes (SPEs) in all-solid-state lithium metal batteries (ASSLMBs). In this study, a novel poly-m-phenyleneisophthalamide (PMIA)-core/poly(ethylene oxide) (PEO)-shell nanofiber membrane and the functional Li6.4La3Zr1.4Ta0.6O12 (LLZTO) ceramic nanoparticle are simultaneously introduced into the PEO-based SPEs to prepare composite polymer electrolytes (CPEs). The core PMIA layer of composite nanofibers can greatly improve the mechanical strength and thermal stability of the CPEs, while the shell PEO layer can provide the 3D continuous transport channels for lithium ions. In addition, the introduction of functional LLZTO nanoparticle not only reduces the crystallinity of PEO, but also promotes the dissociation of lithium salts and releases more Li+ ions through its interaction with the Lewis acid-base of anions, thereby overall improving the transport of lithium ions. Consequently, the optimized CPEs present high ionic conductivity of 1.38×10−4 S/cm at 30 °C, significantly improved mechanical strength (8.5 MPa), remarkable thermal stability (without obvious shrinkage at 150 °C), and conspicuous Li dendrites blocking ability (>1800 h). The CPEs also both have good compatibility and cyclic stability with LiFePO4 (>2000 cycles) and high-voltage LiNi0.8Mn0.1Co0.1O2 (NMC811) (>500 cycles) cathodes. In addition, even at low temperature (40 °C), the assembled LiFePO4/CPEs/Li battery still can cycle stably. The novel design can provide an effective way to exploit high-performance solid-state electrolytes.

Preparation and performance evaluation of organophilic nano-montmorillonite conducting polymer electrolyte for all-solid-state lithium ion batteries

Preparation and Study of a Simple Three-Matrix Solid Electrolyte Membrane in Air

Local Electric Field Effect of Montmorillonite in Solid Polymer Electrolytes for Lithium Metal Batteries

LiNO3 and TMP enabled high voltage room-temperature solid-state lithium metal battery

Study on single-ion solid-state polymer lithium-ion electrolyte membranes

Organic Montmorillonite Modified Polyethylene Oxide Based Polymer Electrolyte for Dendrite-Free Flexible Solid-State Lithium Metal Batteries

Bifunctional lithium-montmorillonite enabling solid electrolyte with superhigh ionic conductivity for high-performanced lithium metal batteries

Well‐Dispersed Polydopamine In Situ Coated Lithium Montmorillonite Nanofillers Composite Polyethylene Oxide‐Based Solid Electrolyte for All‐Solid‐State Lithium Batteries

LiNO 3 and TMP enabled high voltage room-temperature solid-state lithium metal battery

Organic Cationic-Coordinated Perfluoropolymer Electrolytes with Strong Li+-Solvent Interaction for Solid State Li-Metal Batteries

In Situ Coordinated Ultrathin Mof-Polymer Electrolyte Membrane with Vertically Aligned Transfer Channels for Solid Lithium Metal Batteries

Preparation and performance study of a PVDF–LATP ceramic composite polymer electrolyte membrane for solid-state batteries

Polydopamine Coated Lithium Lanthanum Titanate in Bilayer Membrane Electrolytes for Solid Lithium Batteries

Incorporating lithium magnesium silicate into PVDF-HFP based solid electrolyte to achieve advanced solid-state lithium-ion batteries

Metal‐Organic Coordination Enhanced Metallopolymer Electrolytes for Wide‐Temperature Solid‐State Lithium Metal Batteries

Silica-assisted cross-linked polymer electrolyte membrane with high electrochemical stability for lithium-ion batteries

PEO/hollow Mesoporous Polymer Spheres Composites As Electrolyte for All Solid State Lithium Ion Battery

High Performance Polymer/Ionic Liquid Thermoplastic Solid Electrolyte Prepared by Solvent Free Processing for Solid State Lithium Metal Batteries

3D core-shell nanofibers framework and functional ceramic nanoparticles synergistically reinforced composite polymer electrolytes for high-performance all-solid-state lithium metal battery

An interpenetrating network poly(diethylene glycol carbonate)-based polymer electrolyte for solid state lithium batteries

Solid-State Rigid Polymer Composite Electrolytes with In-Situ Formed Nano-Crystalline Lithium Ion Pathways for Lithium-Metal Batteries.