Abstract:The nitrogen doping (N-doping) treatment for niobium superconducting radio-frequency (SRF) cavities is one of the key enabling technologies that support the development of more efficient future large accelerators. However, the N-doping results have diverged due to a complex chemical profile under the nitrogen-doped surface. Particularly, under industrial-scale production conditions, it is difficult to understand the underlying mechanism thus hindering performance improvement. Herein, a combination of spatially resolved and surface-sensitive approaches is employed to establish the detailed near-surface phase composition of thermally processed niobium. The results show that intermediate phase segregations, particularly the nanometric carbon-rich phase, can impede the nitridation process and limit the interactions between nitrogen and the niobium sub-surface. In comparison, the removal of the carbon-rich layer at the Nb surface leads to enhanced nitrogen binding at the Nb surface. Combining the RF test results, it is shown that the complex uniformity and grain boundary penetrations of impurity elements have a direct correlation with the mid-field quench behavior in the N-doped Nb cavities. Therefore, proper control of the nanometric intermediate phase formation in discrete thermal steps is critical in improving the ultimate performance and production yield of the Nb cavities. The origin of the omnipresent mid-field quench issue of nitrogen-doped Nb cavities for modern electron accelerators is traced down to the nanometric phase compositions at the niobium surface by unraveling the key elemental interplay and functioning mechanisms of carbon, nitrogen, and oxygen. Guided by the findings, N-doped 1.3 GHz single-cell Nb cavity with top-tier performance is successfully manufactured.image

Contribution to mid-field Q slope in Niobium SRF cavities from linear RF loss mechanism due to topographic surface structures

Simulation of Non-linear SRF losses derived from characteristic topography of etched and electropolished niobium surfaces

A new first-principles calculation of field-dependent RF surface impedance of BCS superconductor and application to SRF cavities

Unraveling the Nanoscale Segregation Mechanism in N-Doped Niobium for Enhanced SRF Performance

The Collaborative Effects of Intrinsic and Extrinsic Impurities in Low RRR SRF Cavities

Role of microstructure on flux expulsion of superconducting radio frequency cavities

The Effect of Inhomogeneous Surface Disorder on the Superheating Field of Superconducting RF Cavities

Analysis of post wet chemistry heat treatment effects on Nb SRF surface resistance

Influence of material parameters on the performance of niobium based superconducting RF cavities

RF surface resistance tuning of superconducting niobium via thermal diffusion of native oxide

The effect of niobium thin film structure on losses in superconducting circuits

Advancement in the understanding of the field and frequency dependent microwave surface resistance of niobium

Nitrogen Contamination Causes High Field Q-Slope (HFQS) in Buffered Chemical Polished SRF Cavities

Two different origins of the Q-slope problem in superconducting niobium film cavities for a heavy ion accelerator at CERN

Sensitivity of Niobium Superconducting Cavities to Trapped Magnetic Flux Dissipation

Effect of interstitial impurities on the field dependent microwave surface resistance of niobium

Analysis of RF losses and material characterization of samples removed from a Nb3Sn-coated superconducting RF cavity

Multi-mode Analysis of Surface Losses in a Superconducting Microwave Resonator in High Magnetic Fields

Influence Mechanism of RF Bias on Microstructure and Superconducting Properties of Sputtered Niobium Thin Films

Understanding the Mechanism of the Performance Improvement in Nitrogen-doped Niobium Superconducting Radio Frequency Cavity

Field-dependent nonlinear surface resistance and its optimization by surface nano-structuring in superconductors