Abstract:The main objective of this study was to determine the effect of filter pore size and fiber diameter on the performance of the baghouse filters for ultra-low emission. In this study, three kinds of conventional polyester filter (depth filtration media) and two kinds of polytetrafluoroethylene membrane-coated polyester filter (surface filtration media), having various filter pore sizes and fiber diameters, were tested to determine the performance of static and dynamic filtration. In order to determine the static filtration performance, the filtration resistance and the filtration efficiency of the clean filter media were measured by the arrestance method. The dynamic filtration performance experiments were conducted to determine the dynamic resistances, dust depositions, and dynamic filtration efficiencies of the dust-containing filter media under the condition of dust airflow filtration through a pulse-cleaning cycle. In the dynamic filtration performance experiments, the size of 50% test dust was less than 2.5 μm, and the mass mean aerodynamic diameter of the dust was 1.5 μm. The filtration velocity was 2 m∙min−1, and the dust concentration was 18.4 g∙m−3. The static filtration performance experiments showed that the filter pore size greatly affected the filtration resistance and the filtration efficiency of the fabric structure of the surface filtration media. In the depth filtration media, the filtration efficiency and the filtration resistance of the fabric structure were improved when the filter pore size and the fiber diameter were smaller in magnitude. For all the five filter media, smaller the pore size of the filter media, greater was the filtration precision (for fine particles, such as PM2.5) of the fabric structure. In the dynamic filtration performance experiments, the filter pore size and the fiber diameter of the depth filtration media affected the dynamic filtration resistance and the dynamic filtration efficiency of the depth filtration media by affecting the deposition rate of dust in the depth filtration media; however, the filter pore size of the surface filtration media affected the blocking rate of dust in the membrane micropores, thus influencing the dynamic filtration resistance and the dynamic filtration efficiency of the surface filtration media.

Recent Advances in Dust Collection Technology and ISO Standardization in Bag Filtration

An Environmentally Friendly Technology of Metal Fiber Bag Filter to Purify Dust-Laden Airflow

Ambient Air Purification by Nanotechnologies: From Theory to Application

Several Considerations on Dust Control Standard for Foundry (GB8959-2007)

Electrospun Nanofibers Membranes for Effective Air Filtration

Recent Progress of Dry Electrostatic Precipitation for PM 2 . 5 Emission Control from Coal-fired Boilers

An Experimental and Numerical Study on the Cleaning of Pleated Bag Filters Using Low-Pressure Pulsed-Jets

A Study of the Pulse Cleaning Process for Metal Fiber Filter Bags Based on a Discrete Phase Particle Deposition Model

Experimental Study on the Dust Filtration Performance with Participation of Water Mist

Effects of Cleaning Mode on the Performances of Pulse-Jet Cartridge Filter under Varying Particle Sizes

Study on the wet dust collection mechanism of metal-based filter screens and the effect of its inclination angle on dust removal performance

Analysis of constituent factors affecting the state of dedusting of aspiration emissions

Hybrid filtration of sinter dust: an alternative for air pollution control in steel industries

Removal of Dust Produced in the Roadway of Coal Mine Using a Mining Dust Filtration System

Developing a Compact Particle Collector by Integrating a Wet 4 Electrostatic Precipitator and an Inertia Mist Eliminator 5 6

Evolution of PM2.5 Measurements and Standards in the U.S. and Future Perspectives for China

Study on the Filtration Performance of the Baghouse Filters for Ultra-Low Emission as a Function of Filter Pore Size and Fiber Diameter

Research Progress in High-temperature Gas Dust Removal Technology

Air curtain dust-collecting technology: An experimental study on the performance of a large-scale dust-collecting system

Research Progress on Low Concentration Bioaerosol Sampling Technology and Capacity Evaluation

Research on factors affecting the spread of dust pollution in conveyor belt workshop and research on wet dust reduction technology