Abstract:Purpose Polyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to improve the thermal insulation performance of polyethylene terephthalate (PET), the SiO 2 aerogel/PET composites slices and fibers were prepared, and the effects of the SiO 2 aerogel on the morphology, structure, crystallization property and thermal conductivity of the SiO 2 aerogel/PET composites slices and their fibers were systematically investigated. Design/methodology/approach The mass ratio of purified terephthalic acid and ethylene glycol was selected as 1:1.5, which was premixed with Sb 2 O 3 and the corresponding mass of SiO 2 aerogel, and SiO 2 aerogel/PET composites were prepared by direct esterification and in-situ polymerization. The SiO 2 aerogel/PET composite fibers were prepared by melt-spinning method. Findings The results showed that the SiO 2 aerogel was uniformly dispersed in the PET matrix. The thermal insulation coefficient of PET was significantly reduced by the addition of SiO 2 aerogel, and the thermal conductivity of the 1.0 Wt.% SiO 2 aerogel/PET composites was reduced by 75.74 mW/(m · K) compared to the pure PET. The thermal conductivity of the 0.8 Wt.% SiO 2 aerogel/PET composite fiber was reduced by 46.06% compared to the pure PET fiber. The crystallinity and flame-retardant coefficient of the SiO 2 aerogel/PET composite fibers showed an increasing trend with the addition of SiO 2 aerogel. Research limitations/implications The SiO 2 aerogel/PET composite slices and their fibers have good thermal insulation properties and exhibit good potential for application in the field of thermal insulation, such as warm clothes. In today's society where the energy crisis is becoming increasingly serious, improving the thermal insulation performance of PET to reduce energy loss will be of great significance to alleviate the energy crisis. Originality/value In this study, SiO 2 aerogel/PET composite slices and their fibers were prepared by an in situ polymerization process, which solved the problem of difficult dispersion of nanoparticles in the matrix and the thermal conductivity of PET significantly reduced.

In situ synthesis of poly(ethylene terephthalate- co -isophthalate)–SiO 2 nanocomposites and their optical properties

KINETICS OF ISOTHERMAL CRYSTALLIZATION FOR PET/MONTMORILLONITE NANOCOMPOSITES

Interface structure of poly(ethylene terephthalate)/silica nanocomposites

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

Effects of Nanosilica on Crystallization and Thermal Ageing Behaviors of Polyethylene Terephthalate

Isothermal crystallization of polypropylene/surface modified silica nanocomposites

Preparation and Crystalline Properties of PET/ZnO Nano-meter Composite

In-situ synthesis of SiO 2 aerogel/polyethylene terephthalate composite slices and their fibers

Preparation And Properties Of Polylactide/Poly(Ethylene-Co-Octene)/Nano-Sio2 Ternary Composites

In Situ Preparation of Pei/Sio2 Composites and Their Modification for Epoxy Resin

Flame Retardancy and Non-Isothermal Crystallization Behaviour of Pet/Tio2 Nanocomposites

Silicon‐linked polyethylene glycol‐polyethylene terephthalate (PEG‐PET) nanostructures loaded with Eu3+‐complexes for hybrid luminescent PET materials

Preparation and Characterization of Polyester/Silica Nanocomposite Resins

Synthesis and Thermal Behavior of New Poly(Ethylene Terephthalate-Imide)S

PES/SiO2 nanocomposite by in situ polymerization: Synthesis, structure, properties, and new applications

Preparation and Characterization of Polyethylene Terephthalate)/Boehmite Nanocomposites

Crystallization and Mechanical Properties of Polypropylene Filled with Sio2 Nanoparticles

Preparation of QDs@SiO 2 -PEG-LMPET and its influence on crystallization and luminescence of polyethylene terephthalate

In Situ Polymerization and Characterization of Polyester‐based Polyurethane/nano‐silica Composites

Preparation of Core-Shell SiO_2 Nanoparticles and Research of Their Dispersion Behavior in Polyester