Abstract:Carbon nanotube/continuous carbon fiber reinforced poly(ethylene terephthalate) (CNT/CCF/PET) composites are prepared by melt impregnating. The effects of CF and CNT content on the mechanical properties, melt and crystallization behaviors, and submicroscopic morphology of CNT/CCF/PET composites are studied. The tensile test results show that the increase of CF and the addition of appropriate amount of CNT improved the tensile strength and tensile modulus of the composites. When the content of CNT is 1.0 wt% and the content of CF is 56 wt%, the properties of the composites are the best, with tensile strength of 1728.7 MPa and tensile modulus of 25.1 GPa, which is much higher than that of traditional resin matrix composites. The results of dynamic mechanical analysis (DMA) show that the storage modulus of the composites increased with the increase of CF and CNT content. In particular, the addition of CNT greatly reduced the loss modulus of the composites. Morphological analysis show that the addition of CNT improved the fiber–matrix interface of the composite, which changes from fiber pull-out and fracture failure to fiber matrix fracture failure, and the fiber matrix interface is firmly bonded. In addition, there are polymer coated CNT protrusions on the surface of the fiber was observed. The results of differential scanning calorimetry (DSC) show that the melting temperature and crystallization temperature of the composites increased with the increase of CF content. The addition of CNT had little effect on the melting temperature of the composites, but it further improved the crystallization temperature of the composites. The effect of CNT content on the crystallization kinetics of the composites is studied. The non-isothermal crystallization kinetics of the composites is described by Jeziorny's improved Avrami equation. The results show that CNT has a great influence on the crystallization type of the composites. As a nucleating agent, CNT has obvious heterogeneous nucleation effect in the composites, which improves the crystallization rate of PET.

Interface structure of poly(ethylene terephthalate)/silica nanocomposites

KINETICS OF ISOTHERMAL CRYSTALLIZATION FOR PET/MONTMORILLONITE NANOCOMPOSITES

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

Preparation and Crystalline Properties of PET/ZnO Nano-meter Composite

Effects of Nanosilica on Crystallization and Thermal Ageing Behaviors of Polyethylene Terephthalate

Molecular dynamics simulation and experimental study on the mechanical properties of PET nanocomposites filled with CaCO 3 , SiO 2 , and POE- g -GMA

Isothermal crystallization of polypropylene/surface modified silica nanocomposites

Quantification of interfacial structure at nanoscale and its relationship with viscoelastic glass transition of SiO2/elastomer nanocomposites

Structure and Properties of Polyurethane/nanosilica Composites

Enhanced crystallization and properties of poly(ethylene terephthalate) nanocomposites with zeolites from 3D to 2D topologies

Low Percolation Thresholds of Electrical Conductivity and Rheology in Poly(Ethylene Terephthalate) Through the Networks of Multi-Walled Carbon Nanotubes

Preparation and Characterization of Polyester/Silica Nanocomposite Resins

Flame Retardancy and Non-Isothermal Crystallization Behaviour of Pet/Tio2 Nanocomposites

Silicon‐linked polyethylene glycol‐polyethylene terephthalate (PEG‐PET) nanostructures loaded with Eu3+‐complexes for hybrid luminescent PET materials

Microstructure of Carbon Nanotubes/pet Conductive Composites Fibers and Their Properties

Morphology And Molecular Motion Of Poly(Ethylene Terephthalate) In Polymer/Oligomer Gel

Microstructure and Properties of Poly(butylene Terephthalate)/poly(ethylene Terephthalate) Composites Based on Carbon Nanotubes/graphene Nanoplatelets Hybrid Filler Systems

Mechanical Properties, Melting and Crystallization Behaviors, and Morphology of Carbon Nanotubes/Continuous Carbon Fiber Reinforced Polyethylene Terephthalate Composites

In Situ Polymerization of Poly(styrene- Alt -Maleic Anhydride)/organic Montmorillonite Nanocomposites and Their Ionomers As Crystallization Nucleating Agents for Poly(ethylene Terephthalate)

Interfacial regions and network dynamics in epoxy/POSS nanocomposites unravelling through their effects on the motion of molecular chains

Interfacial Chain Entanglements Induced Melt Memory Effect in Poly(ε-caprolactone)/Silica Nanocomposites