Abstract:Fibre reinforced polymer composites have become a new generation of structural materials due to their unique advantages such as high specific strength, designability, good dimensional stability and ease of large-area monolithic forming. However, the problem of interfacial bonding between the resin matrix and the fibres limits the direct use of reinforcing fibres and has become a central difficulty in the development of basalt fibre-epoxy composites. This paper proposes a solution for enhancing the strength of the fibre-resin interface using maize starch nanocrystals, which are highly yield and eco-friendly. Firstly, in this paper, corn starch nanocrystals (SNC) were prepared by hydrolysis, and were deposited on the surface of basalt fibers by electrostatic adsorption. After that, in order to maximize the modification effect of nano-starch crystals on the interface, the basalt fiber-epoxy resin composite samples were prepared by mixing in a pressureless molding method. The test results shown that the addition of basalt fibers alone led to a reduction in the strength of the sample. Deposition of 0.1 wt% SNC on the surface of basalt fibers can make the strength consistent with pure epoxy resin. When the adsorption amount of SNC reached 0.5 wt%, the tensile strength of the samples was 23.7% higher than that of pure epoxy resin. This is due to the formation of ether bond homopolymers between the SNC at the fibre-epoxy interface and the epoxy resin, which distorts the originally smooth interface, leading to increased stress concentration and the development of cracks. This enhances the binding of basalt fibers. The conclusions of this paper can provide an effective, simple, low-cost and non-polluting method of interfacial enhancement modification.

Hybrid epoxy composites based on basalt fabric: a case study of low‐temperature plasma treatment and reduced graphene oxide flakes addition.

Mechanical Properties of Basalt / Chopped E-Glass Fiber and Graphite Powder Reinforced Hybrid Composites

Preparation, Thermal Analysis, and Mechanical Properties of Basalt Fiber/Epoxy Composites

Influence of Plasma Modification of Basalt Fibers on the Physical and Mechanical Characteristics of Peek-Based Laminates

Manufacturing and Characterization of Hybrid Composites with Basalt and Flax Fabrics and a Partially Bio-based Epoxy Resin

Flax/basalt/E-glass Fibers Reinforced Epoxy Composites with Enhanced Mechanical Properties

Hybrid Epoxy Composites with Both Powder and Fiber Filler: A Review of Mechanical and Thermomechanical Properties

Basalt Fiber-Reinforced Epoxy Laminates: Improvement in Quasi-Static and Fatigue Properties with Modified Matrices and Fiber Surfaces Using Silica Nanoparticles

Uncovering the attributes of micro-size basalt powder doped epoxy composites: fabrication, characterization, and gamma attenuation properties

Highly advanced phthalonitrile composites from epoxy‐ended hyperbranched poly(trimellitic anhydride ethylene glycol) ester grafted basalt fibers

High Mechanical and Thermal Properties of Epoxy Composites with Liquid Crystalline Polyurethane Modified Graphene

Free-standing graphene films embedded in epoxy resin with enhanced thermal properties

Optimization Mechanism of Mechanical Properties of Basalt Fiber-Epoxy Resin Composites by Interfacially Enriched Distribution of Nano-Starch Crystals

Development of epoxy composites with graphene nanoplatelets and micro-sized carbon foam: morphology and thermal, mechanical and tribological properties

Hybrid multi-scale basalt fiber-epoxy composite laminate reinforced with Electrospun polyurethane nanofibers containing carbon nanotubes

Thermo-Mechanical Performance of Epoxy Hybrid System Based on Carbon Nanotubes and Graphene Nanoparticles

Manufacturing of composite materials with high environmental efficiency using epoxy resin of renewable origin and permeable light cores for vacuum-assisted infusion molding

Mechanical Properties of Longitudinal Basalt/Woven-Glass-Fiber-reinforced Unsaturated Polyester-Resin Hybrid Composites

Physical and mechanical properties of graphene and h‐Boron nitride reinforced hybrid aerospace grade epoxy nanocomposites

Basalt Fiber-Based Flame Retardant Epoxy Composites: Preparation, Thermal Properties, and Flame Retardancy

Enhanced interfacial interaction, mechanical properties and thermal stability of basalt fiber/epoxy composites with multi-scale reinforcements