Abstract:Conventional epoxy thermosets lack toughness, and conventional methods to toughen them are at the cost of decreasing other properties of the materials, such as the mechanical modulus, strength and transparency. Herein, hydrogenated MQ silicone resins (H-MQ) of various M/Q ratios, where M and Q denote R3SiO1/2 and SiO4/2, respectively, are synthesized from co-hydrolytic condensation of siloxane precursors. Then, these H-MQ resins are bonded with two epoxy monomers, bio-based eugenol glycidyl ether (EG) and allyl glycidyl ether (AG), through hydrosilylation to afford EG-MQ and AG-MQ, respectively, with tailored organic segments and M/Q ratios. The obtained epoxy-functionalized MQ silicone resins will have increased compatibility with the epoxy matrix. Compared with neat DGEBA thermosets, the addition of 20% EG-1.2MQ (M/Q ratio = 1.2 : 1) leads to marked increases in impact, tensile, and flexural strengths by 90%, 3%, and 3%, respectively, as well as increases in tensile and flexural strains by 55% and 100%. The epoxidized organic segments are found to be critical for enhancing the mechanical properties of the obtained epoxy composites. The EG-MQ/epoxy composites show better mechanical properties than AG-MQ/epoxy systems due to the improved compatibility of EG-MQ with DGEBA due to the aromatic EG moieties attached. Furthermore, the thermal stability and residual yield are increased by adding these silicone resins, with an increased water contact angle from 80 to as high as 110 degrees. Our contribution provides a new avenue for integrating such good properties as impact toughness, mechanical properties, thermal stability and water repellance into the obtained epoxy thermosetting materials, without compromising the transparency.

Piers-Rubinsztajn reaction for BCB functionalized silphenylene/silbiphenylene siloxane oligomers to highly crosslinked low-k thermosets

Facile Synthesis of Novel HTPBs and EHTPBs with High Cis-1,4 Content and Extremely Low Glass Transition Temperature

Benzocyclobutene organosiloxane resins prepared by alcoholysis of BCB functionalized chlorosilane for highly crosslinked low-k thermosets

Multi-benzocyclobutene Functionalized Siloxane Monomers Prepared by Piers-Rubinsztajn Reaction for Low-K Materials

Multibenzocyclobutene Functionalized Silane for Low-k Polyarylsilane Thermosets with Low Coefficient of Thermal Expansion and High Thermostability

Synthesis, Properties of Novel Benzocyclobutene-Functionalized Siloxane Thermosets

Ring-Opening Copolymerization of Mixed Cyclic Monomers: A Facile, Versatile and Structure-Controllable Approach to Preparing Poly(methylphenylsiloxane) with Enhanced Thermal Stability

Highly Thermal Conductive Benzoxazine‐epoxy Interpenetrating Polymer Networks Containing Liquid Crystalline Structures

Benzocyclobutene-functionalized Hyperbranched Polysiloxane for Low-K Materials with Good Thermostability

Bio-based epoxy functionalized MQ silicone resins: from synthesis to toughened epoxy composites with good mechanical properties, thermal resistance and transparency

Synthesis, Thermal and Mechanical Properties of Benzocyclobutene-Functionalized Siloxane Thermosets with Different Geometric Structures

Double-decker Silsesquioxane-Doped Benzocyclobutene Functionalized Siloxane Polymer for Low K Materials

Phenylethynyl and Phenol End-Capping Studies of Polybiphenyloxydiphenylsilanes for Cross-Linking and Enhanced Thermal Stability

Thermosets with core–shell nanodomain by incorporation of core crosslinked star polymer into epoxy resin

Study of benzocyclobutene-functionalized siloxane thermoset with a cyclic structure

High-Temperature Resistant Polyborosilazanes with Tailored Structures

A novel crosslinking agent of polymethyl(ketoxime)siloxane for room temperature vulcanized silicone rubbers: synthesis, properties and thermal stability

Polybenzoxazine containing polysilsesquioxane: Preparation and thermal properties

Synthesis and Properties of Highly Cross-Linked Thermosetting Resins of Benzocyclobutene-Functionalized Benzoxazine

High Performance Thermosets from a Curable Diels–Alder Polymer Possessing Benzoxazine Groups in the Main Chain

Synthesis of structured polysiloxazanes via a Piers-Rubinsztajn reaction.