Abstract:In this work, a shell and tube heat exchanger with inclined trefoil-hole baffles (STHX-IT) is proposed, and the numerical simulation is conducted to investigate the flow and heat transfer characteristics. A shell and tube heat exchanger with segmental baffles (STHX-SG) is also studied for the performance comparison. The results show that the heat transfer coefficient and pressure drop of the STHX-IT is averagely lower by 23.89% and 44.19% than those of the STHX-SG, but the heat transfer coefficient per pressure drop is higher by 36.38% on average. Further, the parametric studies of the inclination angle θ, trefoil-hole number n, and baffle cut δ are carried out for the STHX-IT. According to the numerical results, n and δ have more notable influence on shell side performance than θ. In detail, the heat transfer coefficient and pressure drop decrease slightly with θ increasing, and the overall performance is approximately equal; both the heat transfer coefficient and pressure drop decrease with the respective rising of n and δ, but the comprehensive performance shows a growing trend. Considering the synthetic effects of structural parameters, the multi-objective structure optimization using the genetic algorithm combined with the artificial neural networks is fulfilled. As a result, the Pareto front is obtained to characterize the behaviors of the maximum heat transfer rate and minimum pressure drop. The STHX-IT with the θ = 5.38°, n = 6, and δ = 43% is decided as the optimal solution by the TOPSIS method, whose Q/Δp is 2.34 times as much as that of the original STHX-SG.

Study of Improvements on Flow Maldistribution of Double Tube-Passes Shell-and-tube Heat Exchanger with Rectangular Header

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

Effect of Inlet Flow Maldistribution on the Passage Arrangement Design of Multi-Stream Plate-Fin Heat Exchanger

Study of flow distribution and its improvement on the header of plate-fin heat exchanger

Improvements on Flow Distribution and Heat Transfer Performance of Plate-fin Heat Exchangers by Qusai-S Type Header Configuration

Experimental and numerical simulation study of a novel double shell-passes multi-layer helically coiled tubes heat exchanger

Numerical Investigation on Combined Multiple Shell-Pass Shell-And-Tube Heat Exchanger with Continuous Helical Baffles

Experimental analysis on performance assessment of a hybrid double cross flow tube arrangement in a shell and tube heat exchanger

Piv Experimental Investigation on Shell-Side Flow Patterns of Shell and Tube Heat Exchanger with Different Helical Baffles

Experimental Investigation of Shell-Side Performance and Optimal Design of Shell-and-Tube Heat Exchanger with Different Flower Baffles

Flow Distributions of Header Configurations in Plate-Fin Heat Exchangers with Particle Image Velocimetry (PIV)

Improvements on Maldistribution of a High Temperature Multi-Channel Compact Heat Exchanger by Different Inlet Baffles

Numerical Investigation and Optimization on Shell Side Performance of A Shell and Tube Heat Exchanger with Inclined Trefoil-Hole Baffles

Numerical Investigation on the Shell and Tube Heat Exchanger with Baffle Leakage Zones Blocked

3-D Numerical Study on Shell-Side Comprehensive Performance of Shell-and-Tube Heat Exchanger with Combined Helical Baffles

Analysing Thermal-Hydraulic Performance and Energy Efficiency of Shell-and-tube Heat Exchangers with Longitudinal Flow Based on Experiment and Numerical Simulation

Numerical Study on Novel Design for Compact Parallel-Flow Heat Exchanger with Manifolds to Improve Flow Characteristics

Flow Distribution Properties of Header Configuration in Plate-Fin Heat Exchangers

NUMERICAL STUDY ON FLOW DISTRIBUTION IN PLATE-FIN HEAT EXCHANGERS

Experimental and numerical investigations of shell-side thermo-hydraulic performances for shell-and-tube heat exchanger with trefoil-hole baffles

Experimental and numerical studies on shell-side performance of three different shell-and-tube heat exchangers with helical baffles