Abstract:This article presents a method to design a single-band (SB)/dual-band (DB) bandpass filter (BPF)-integrated single-pole double-throw (SPDT) switch by using one/two distributed coupling identical tri-mode resonator (TMR) pairs loaded with opposite polarity p-i-n diodes. Moreover, the proposed method is also directly suitable for designing the multiple-band (MB) BPF-integrated SPDT switch by simply increasing the used numbers of identical TMR pairs. As an example, a SB-BPF-integrated SPDT switch with the central frequency (CF) of 1 GHz and the ripple bandwidth (RBW) of 65 MHz is first designed by using one identical switchable TMR pair, so as to validate our design approach. Due to the inherent property of TMR and the introduced source-load coupling, high ON-state passband selectivity is achieved. Then, two switched 50- $\Omega $ matching circuits are connected to two noncommon feeding lines, and an SB-BPF-integrated SPDT switch with absorptive OFF-state property is also realized. Finally, a DB-BPF-integrated SPDT switch with CFs of 0.9 GHz/1.8 GHz and RBWs of 50 MHz/105 MHz is designed by simply employing two identical TMR pairs. When the operating states of two identical switchable TMR pairs are specifically chosen, the proposed DB-BPF-integrated SPDT switch exhibits multiple functions, i.e., the 900/1800 SB-BPF-integrated SPDT switches with absorptive OFF-state property, the 900/1800 DB-BPF-integrated SPDT switch with absorptive OFF-state property, and the 900/1800 diplexer-integrated SPDT switch. The measured results also show that these switches exhibit low ON-state passband losses, deep out-of-band rejections (OBRs) of ON-state passbands, high OFF-state suppressions (OSSs), high port-to-port isolations (PPIs), and compact circuit sizes.

Miniaturized Frequency-Agile Bandpass Filter Integrated Single-Pole Double-Throw Switch

A Wideband Bandpass Filter Integrated Single-Pole Double-Throw Switch with Wide Stopband

Quasi-Lumped-Element Filter-Integrated Single-Pole Double-Throw Switch

Single-/Dual-Band Bandpass Filter-Integrated Single-Pole Double-Throw Switch Using Distributed Coupling Tri-Mode Resonators

A Quasi-Elliptic Bandpass Filter-Integrated Single-Pole Double-Throw Switch

Sharp Skirt Bandpass Filter-Integrated Single-Pole Double-Throw Switch with Absorptive OFF-State

Design of BPF-Integrated SPDT Switch Based on Slotline Resonators Loaded with Diodes.

Coaxial Feeding BPF Integrated SP7T Switch

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A BPF Integrated SP4T Switch Using Parallel Switched Fractal Common Feeding Line

A 5th order 0.8/2.4 GHz programmable active band pass filter for power DAC applications

BPF-Integrated SPDT Switches with Improved Performance Using Frequency Selective Star-Junction Matching Circuit and Switched Magnetic Coupling Technique

A Microwave Single-Pole Double-Throw T/R Switch Integrating Bandpass Response

Miniaturized Dual-Mode Dual-Band BPF Using a Single Square Patch Loaded Stepped-Impedance Square Open Loop Resonator

A Bandpass Filtering Switch with High out of Band Isolation Based on PIN Diodes

Compact Switchable Bandpass Filter and Its Application to Switchable Diplexer Design

Compact Filtering Switch with Wide-Stopband Response.

A Compact Wideband SPDT Switch Using Compensating Inductors and Highpass Matching Network

Compact Tunable Wideband Bandpass Filter Using Mixed Coupling Lumped Dual-Mode Resonator

Tunable Bandpass Filter Using a Switched Tunable Diplexer Technique.

Wideband-Filtering Switches with Ultra-Wide Stopband Using P-I-N Diodes Loaded on Slotline