Abstract:Particle and bubble motion plays an important role in determining the hydrodynamic characteristics of a fluidized system. The dynamic parameters of a fluidized bed are reflection of the complex correlation between particle–particle and particle–bubble in a system. A two-dimensional Eulerian–Eulerian model integrating the kinetic theory of granular flow is used to simulate the bubble and linear low density polyethylene (LLDPE) particle dynamic behavior in a gas–solid fluidized bed. The simulated method is validated by pressure fluctuation experiment. The computed vertical turbulent energy spectrum of particles is applied to identify the particle motion intensity and the inhomogeneity of turbulent energy dissipation. The energy spectrum captures the Levy–Kolmogorov law in inertial range at high frequency. Furthermore, the flatness factors of wavelet decomposition coefficients of particle fluctuation velocity are for the first time introduced to analyze the intermittence caused by coherent structures in the flow field. The results show that the intermittence in dissipation range is much stronger than that in energy-containing and inertial range, and reinforces rapidly as the radial distance and the bed height increase. Moreover, the acoustic emission (AE) energy is found to be able to indicate the flow regimes. By combing granular temperature and AE energy, the relationship between the spatial distribution of granular temperature and the flow regimes is established. To get more detail of bubble motion behavior, the power spectrum of voidage fluctuation is analyzed. This work provides valuable insights into the dynamic characteristics and the flow field information of a gas–solid fluidized bed by CFD simulation.

Impact Velocity-Dependent Restitution Coefficient Using a Coupled Eulerian Fluid Phase-Eulerian Solid Phase-Lagrangian Discrete Particles Phase Model in Gas-Monodisperse Particles Internally Circulating Fluidized Bed

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

A Coupled Eulerian Fluid Phase-Eulerian Solids Phase-Lagrangian Discrete Particles Hybrid Model Applied to Gas-Solids Bubbling Fluidized Beds

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

CFD-DEM Simulation of Liquid-Solid Fluidized Bed with Dynamic Restitution Coefficient

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

A dynamic coefficient of restitution applied to Two-fluid model in liquid-solid fluidized bed

LES-DEM Investigation of Dense Flow in Circulating Fluidized Beds

LES-DEM Investigation of Gas–solid Flow Dynamics in an Internally Circulating Fluidized Bed

Discrete Element Method Simulation of Influence of Restitution Coefficient on Granular Kinetic Behaviors in Spout-fluid Bed

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Investigation of Interstitial Fluid Effect on the Hydrodynamics of Granular in Liquid-Solid Fluidized Beds with CFD-DEM

Development and Verification of Coarse‐grain CFD‐DEM for Nonspherical Particles in a Gas–solid Fluidized Bed

Computational Fluid Dynamics-Discrete Element Method Investigation of Solid Mixing Characteristics in an Internally Circulating Fluidized Bed

Numerical Study of Gas–solid Flow in a Coal Beneficiation Fluidized Bed Using Kinetic Theory of Granular Flow

Numerical Simulation Of The Gas-Solid Flow In An Internally Circulating Fluidized Bed With A Dem- Cfd Model

Interface Velocity Correction for Improving Resolved CFD-DEM Simulation of Two-Phase Flow in Densely Packed Granular Media

Simulation of the Lateral Movement on Particles Under Continuous Feeding and Discharging in a CFB Dense Zone

Modeling and validation of coarse-grained computational fluid dynamics–discrete element method for dense gas–solid flow simulation in a bubbling fluidized bed

Numerical Investigation of Subcritical and Supercritical Carbon Dioxide Fluidized Beds Using Two Fluid Model and Discrete Element Method