Abstract:In the energy conversion process, the inert bed material such as sand with spherical shape is usually added to the fluidized bed for the proper fluidization of the non-spherical biomass particles. Understanding fluidization of the binary mixtures containing the biomass and the bed material is therefore significant for better utilization of the biomass. To this end, CFD-DEM model is used to simulate the fluidization of the binary mixtures containing the rod-like particles that represent the light and large biomass particles and the spherical particles that represent the dense and small bed material, in which all particles are described by super-ellipsoid model. Five granular systems with different volume fractions of the rod-like particles but the same particle volume are simulated in this paper. The simulation results demonstrate that the minimum fluidization velocity would increase with the volume fraction of the rod-like particles. The addition of the spherical particles is beneficial to the fluidization of the rod-like particles. The mixing rate in binary granular system and the distribution of the coordinate number would be affected by the gas superficial velocity and the volume fraction of the rod-like particles. For the orientation of the rod-like particles, its distribution in binary granular system is different from that in monodisperse rod-like particle system. But whether in binary granular system or monodisperse rod-like particle system, there is apparent wall effect on the particle orientation.

Discrete Element Method Simulation of Influence of Restitution Coefficient on Granular Kinetic Behaviors in Spout-fluid Bed

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

CFD-DEM Simulation of Liquid-Solid Fluidized Bed with Dynamic Restitution Coefficient

Computational Granular Dynamics Simulation of Unsteady Movement in Particle Moving Bed

A dynamic coefficient of restitution applied to Two-fluid model in liquid-solid fluidized bed

Investigation of Interstitial Fluid Effect on the Hydrodynamics of Granular in Liquid-Solid Fluidized Beds with CFD-DEM

Dem Simulation of Wet Granular-Fluid Flows in Spouted Beds: Numerical Studies and Experimental Verifications

DEM Simulation of the Particle Dynamics in Two-Dimensional Spouted Beds

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

Discrete Element Method Simulation on the Immigration of Granular Matter in a Vertically Vibrating U-Tube

Investigation of Modeling Non-Spherical Particles by Using Spherical Discrete Element Model with Rolling Friction

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Discrete Element Method Simulations for Complex Granular Flows

Effect of Cohesion on Granular-Fluid Flows in Spouted Beds: PIV Measurement and DEM Simulations

Improvement of the Coarse-Grained Discrete Element Method for Frictional Particles

The Effects of Collisional Parameters on the Hydrodynamics and Heat Transfer in Spouted Bed: A CFD-DEM Study

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Impact Velocity-Dependent Restitution Coefficient Using a Coupled Eulerian Fluid Phase-Eulerian Solid Phase-Lagrangian Discrete Particles Phase Model in Gas-Monodisperse Particles Internally Circulating Fluidized Bed

Influence of rolling friction on single spout fluidized bed simulation

Numerical study of turbulence model effect on gas-particle flow behavior in spouted bed