Abstract:Strain and strain rate are two important factors that affect the mechanical behavior of materials,and the split Hopkinson pressure bar (SHPB) technique is one of the effective ways to realize different strain and strain rate loading conditions.To study the plastic deformation and fracture behavior of TC18 titanium alloy under dynamic loading (ranging from 300 to 3 000 s-1),a series of dynamic compression tests on TC18 titanium alloy have been performed by means of SHPB technique at room temperature.The different strain and strain rate loading conditions are realized by changing the length and velocity of the striker.Macro true stress-true strain curves are obtained under different strain rate loading,so are the true stress-true strain curves under the same strain rate with different strain loading conditions.The effects of strain hardening and strain rate hardening on the dynamic mechanical properties of TC 18 titanium alloy are discussed.Results indicate that the collapse of specimen occurs along a plane inclined at an angle of about 45 °to the compression axis,namely,shear failure is the main failure mechanism for TC 18 titanium alloy under compression loading at room temperature,and it is dependent on strain and strain rate;the higher the strain rate is,the larger the flow stress (or yield stress) of TC18 titanium alloy is,therefore,the material shows clearly evident strain rate hardening effect;and the analyses of microstructure and fracture morphology show that adiabatic shear bands are the precursor to the crack formation and fracture.

Investigation on the Strain Rate Sensitivity of Polytetrafluoroethylene

Mechanical properties of PTFE at high strain rate

The Effect Of Crystallinity On Compressive Properties Of Al-Ptfe

Strain Hardening Behaviors and Mechanisms of Polyurethane under Various Strain Rate Loading

Tension testing of polycarbonate at high strain rates

Experimental Study on the Quasi-Static Tensile Mechanical Response of PTFE from 77 K to 293 K

Temperature- and Strain-Rate-dependent Tensile Failure Behavior of Short-Fiber-reinforced PEEK Composites

Mechanical Behaviors and Equivalent Configuration of a Polyurea under Wide Strain Rate Range

Experimental Studies on Influence of Strain Rate and Temperature on the Plastic Deformation Performance of PM FGH95

High Strain-Rate Tensile Experiment on Polycarbonate Bar

The Dynamic Compressible And Shear Responses Of Reactive Materials-Ptfe/Al

Characterization of the Dynamic Response and Constitutive Behavior of PTFE/Al/W Reactive Materials

Mechanical Behavior of Polytetrafluoroethylene/Aluminum Energetic Materials under High and Low Temperature Conditions

THE STUDY ON THE COMPRESSIVE BEHAVIOR OF PTFE/Al ENERGETIC COMPOSITE

Characterize the High-temperature Steady-state Rheological Behavior and Arrhenius Activation of PEEK Via Strain Rate Jump Tensile Tests

Strain-rate effect of polymers and correction methodology in a SHPB test

High Strain and Strain-Rate Behaviour of PTFE/Aluminium/Tungsten Mixtures

Three-Part Superposition Quasi-Static Stress Model for PTFE Across a Broad Low-Temperature Range Based on ZWT and Higher-Order Stress Corrections

Influence of strain rate and temperature on mechanical properties of carbon woven-ply PPS thermoplastic laminates under dynamic compression

The Dynamic Compressive Properties of PTFE/Al Reactive Materials

Experimental Research on Dynamic Mechanical Behavior of TC18 Titanium Alloy under Medium and High Strain Rates