Abstract:The thermal and catalytic cracking of Arabian Light crude oil, which has a density of 34° API, were evaluated in a fixed-bed microactivity test (MAT) unit between 550 and 650 °C. For the catalytic cracking, two catalysts were used, a steamed commercial MFI catalyst (M-cat) and an equilibrium FCC catalyst (E-cat). Thermal and catalytic cracking were compared at the same conversion, 34%, at 650 °C. For both, as the temperature increased, the yields of light olefins, LPG, dry gas, and coke increased, associated with a consistent decrease in heavy ends (LCO and HCO). The naphtha yield for catalytic cracking decreased as temperature increased; however, for thermal cracking, it was nearly constant. The superiority of catalytic cracking over thermal cracking for the propylene yield was interpreted in terms of mechanisms of free radicals and carbenium ions. Thermal cracking gave a higher yield of ethylene. At high temperature (650 °C) and catalyst to oil (C/O) ratio of 4, the olefins yield decreased in the order of M-cat (32.7 wt %) > E-cat (30.3 wt %) > thermal cracking (22.8 wt %). The highest yields of ethylene and propylene (10.9 and 15.7 wt %), achieved over M-cat at 650 °C, are attributed to shape selectivity and higher acidity. The naphtha yield for E-cat was much higher than for M-cat; for instance, at 550 °C it was 48.3 wt % for E-cat and 24.4 wt % for M-cat. This was attributed to diffusion limitations for M-cat. The effect of the C/O ratio on conversion and yields was also inspected, and the analysis showed that after a C/O ratio of 4, further increases had only a minor effect. Lastly, the effect of mixing E-cat and M-cat at different percentages was evaluated, and the investigation showed an optimum point at 58% M-cat, with the corresponding yields of ethylene and propylene at 10.7 and 19.2 wt %, respectively.

Enhancing the production of light olefins from heavy crude oils: Turning challenges into opportunities

An Overview of Light Olefins Production via Steam Enhanced Catalytic Cracking

Catalytic Cracking of Crude Oil: Mini Review of Catalyst Formulations for Enhanced Selectivity to Light Olefins

Targeted Catalytic Cracking to Olefins (TCO): Reaction Mechanism, Production Scheme, and Process Perspectives

Maximization production of light olefins from dual-stage catalytic dehydrogenation cracking of crude oil: Catalysis mechanism and pilot trial

A Review of Catalyst Modification and Process Factors in the Production of Light Olefins from Direct Crude Oil Catalytic Cracking

One-step conversion of crude oil to light olefins using a multi-zone reactor

Crude oil to chemicals: light olefins from crude oil

Crude oil hierarchical catalytic cracking for maximizing chemicals production: Pilot-scale test, process optimization strategy, techno-economic-society-environment assessment

Catalytic Steam Cracking of Heavy Oil Feedstocks: A Review

Conversion of Arabian Light Crude Oil to Light Olefins via Catalytic and Thermal Cracking

Catalysts in the Catalytic Cracking of Hydrocarbons to Produce Light Olefins

Production of Low‐carbon Light Olefins from Catalytic Cracking of Crude Bio‐oil

Molecular-refining oriented strategy of catalytic cracking for processing heavy oil

Efficient processing of crude oil using direct cracking at high temperatures over modified FCC catalysts

Catalytic Cracking of Lower-Valued Hydrocarbons for Producing Light Olefins

Selective conversion of bio-oil to light olefins: Controlling catalytic cracking for maximum olefins

Catalytic cracking of crude oil to light olefins and naphtha: Experimental and kinetic modeling

Catalytic Cracking of Light Crude Oil: Effect of Feed Mixing with Liquid Hydrocarbon Fractions