Abstract:Steam cracking is an energy-intensive process used to convert natural gas liquids, naphtha, and gas oil into ethylene and propylene, as well as other chemicals. It is the primary source of ethylene, one of the most important building blocks for the chemical and plastics industry. Steam cracking also co-produces hydrogen which is typically combusted with the tail gas onsite for process heat, but alternatively could be separated and sold as a by-product. This study provides a detailed life cycle inventory for the United States steam cracking industry based on publicly-available, facility-specific information; provides industry average results; and assesses variability across facilities, feedstocks, and technologies. This life cycle inventory provides the baseline needed for comparison of plastic alternatives designed to improve recyclability and reduce the environmental effects of plastics. Likewise, the environmental profile of by-product hydrogen from steam crackers is important for assessing its potential benefit in decarbonizing transportation and/or industry, considering the energy use for separation and compression, as well as the make-up fuel requirements. We present the cradle-to-gate results for all steam cracking products and find the life cycle GHG emissions for average U.S. ethylene and propylene are 1.13 kg CO2e per kilogram using a mass allocation, 1.05 kg CO2e for facilities that combust their hydrogen, and 1.30 kg CO2e for facilities that separate by-product hydrogen for use. With natural gas production and ethylene demand continuing at high levels in the United States, decarbonizing steam cracking would be an important step toward mitigating emissions from the chemical industry. Similarly, the benefit of using by-product hydrogen to decarbonize other processes is dependent on the relative benefit of the hydrogen application compared with the alternative energy source used for steam cracking process heat. Results are also reported for criteria air pollutant emissions, energy use, water use, and a series of life cycle impact potentials.

An Overview of Light Olefins Production via Steam Enhanced Catalytic Cracking

Thermal/catalytic cracking of liquid hydrocarbons for the production of olefins: A state-of-the-art review II: Catalytic cracking review

Thermal/catalytic cracking of hydrocarbons for the production of olefins: A state-of-the-art review I: Thermal cracking review

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Catalytic Steam Cracking of Heavy Oil Feedstocks: A Review

A Review on Production of Light Olefins via Fluid Catalytic Cracking

Catalytic Cracking of Lower-Valued Hydrocarbons for Producing Light Olefins

Low-Temperature-Initiated Cracking of Hydrocarbons to Produce Olefins: Simulation and Comparison of Different Initiators

A Review of Catalyst Modification and Process Factors in the Production of Light Olefins from Direct Crude Oil Catalytic Cracking

Targeted Catalytic Cracking to Olefins (TCO): Reaction Mechanism, Production Scheme, and Process Perspectives

Thermal Cracking of Hydrocarbons for the Production of Light Olefins; A Review on Optimal Process Design, Operation, and Control

Cracking Performance and Feed Characterization Study of Catalytic Pyrolysis for Light Olefin Production

Catalysts in the Catalytic Cracking of Hydrocarbons to Produce Light Olefins

Environmental life cycle assessment of olefins and by-product hydrogen from steam cracking of natural gas liquids, naphtha, and gas oil

Steam catalytic cracking and lump kinetics of naphtha to light olefins over nanocrystalline ZSM-5 zeolite

Steam catalytic cracking of vacuum gas oil: Effect of co-feeding naphtha or gas condensate on light olefins yield

Quantitative Analysis of CO2 Emissions Reduction Potential of Alternative Light Olefins Production Processes

Catalytic Cracking of Crude Oil: Mini Review of Catalyst Formulations for Enhanced Selectivity to Light Olefins

Catalytic cracking of heavy atmospheric gas oil to light olefins over ZSM-5 zeolite: Effect of crystal size in the absence/presence of steam

Steam cracking and methane to olefins: Energy use, CO2 emissions and production costs