Abstract:A unified approach based on bridging micromechanics model to the simulation of inelastic and strength properties of textile (woven, braided, and knitted) fabric reinforced composite laminates is reviewed and summarized in this paper. The approach is performed ply by ply. While classical lamination theory is employed to determine the load shared by a lamina ply, the individual ply analysis essentially consists of three steps. In the first step, a representative volume element (RVE) of the lamina is isolated and the geometry of the textile preform in the RVE is identified. According to this geometrical description, the RVE is divided into a series of unidirectional (UD) composites whose orientations have all been known. Thus, the second step is concerned with the analysis of all the UD composites, which is accomplished by using the bridging model. The three fundamental quantities, i.e. the stress increments in the fiber, the stress increments in the matrix, and the overall compliance matrix of the composite, are explicitly obtained at each load level. The last step deals with an assemblage of all the UD composites to obtain the mechanical response characteristics of the considered ply. The ply failure is assumed if the internal stress state in any constituent attains its ultimate value, and a progressive failure process of the laminate results. Otherwise, the ply instantaneous compliance matrix is adapted to define the overall instantaneous stiffness matrix of the laminate for additional analysis. Ultimate failure strengths of different textile composite laminates subjected to in-plane, fatigue, as well as out-of plane bending loads have been obtained, which compare favorably with our experimental data.

Experimental and Numerical Study on Nonlinear Mechanical Properties of Laminated Woven Fabrics

Response Characteristics of Elastic Parameters of Woven Fabrics in Stress Space and a Nonlinear Constitutive Analysis

Nonlinear analysis based on biaxial tensile test of airship envelope fabrics

Mechanical Behaviors and Elastic Parameters of Laminated Fabric URETEK3216LV Subjected to Uniaxial and Biaxial Loading

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Response characteristics on tensile strains in stress space of laminate woven fabrics

Elastic and Strength Analysis of Hybrid 3D Woven Orthogonal Composites: Numerical and Analytical Modelling

Response surface analysis of biaxial mechanical properties and elastic parameters for woven fabric composites

An Experimental and Numerical Study of the Mechanical Properties of 3-D Braided Structural Textile Composites

Finite Element Modelling for Tensile Behaviour of Thermally Bonded Nonwoven Fabric

Finte element analysis of the mechanical properties of woven composite

Analysis of Elastic Parameters for Laminated Fabrics Used in Airships under Biaxial Stresses

A Numerical And Experimental-Study On The Nonlinear Behavior Of Laminated Composite Structural Components

Modeling inelastic and strength properties of textile laminates: a unified approach

Nonlinear Finite Element Analysis Of Fibre Composites With Different Properties In Tension And Compression

Development of a Numerical Material Model for Axial Crushing Mechanical Characterization of Woven CFRP Composites

Detailed Deformation Behaviors and Tensile Parameters for Coated Warp-Knitted Fabrics in 2D Stress Space

Failure analysis of laminated structures by FEM based on nonlinear constitutive relationship

Three Dimensional Elastic-plastic Finite Element Analysis of Tensile Properties of Carbon Fibre Reinforced Aluminium Alloy Laminates

Experimental and Numerical Study on the Tensile Behaviour of UACS/Al Fibre Metal Laminate

Numerical investigation on the mechanical behaviors of 2D woven composites under complex in-plane stress states