Abstract:At present, constitutive models considering the initial non-linearity of fiber reinforced composites under compression are rare. However, due to the inevitable manufacturing and processing defects, different material properties and inter-layer interface characteristics, the fiber reinforced composites show an initial non-linearity in engineering applications, which makes the stress path obtained by finite element analysis (FEA) inconsistent with the actual condition. To prove the existence of the initial non-linearity, the in-plane and out-of-plane compression experiments were conducted for carbon fiber reinforced epoxy resin (CFRP) laminate. According to the microscopic morphology from the scanning electron microscope (SEM) and experimental results, reasons for the initial non-linearity were discussed. Further, the initial nonlinear factor was introduced to develop a nonlinear constitutive model on the basis of orthotropic constitutive model. Combining Hashin failure criteria, inter-layer constitutive model and damage evolution law, the complete compression behaviors of CFRP laminate were obtained by user subroutine material VUMAT. The experimental results show that the initial non-linearity originates partly from the microscopic defects of material itself, such as the pores of matrix, the micro-cracks and interface dislocation. The slopes (i.e., elastic modulus) of stress–strain curves with linear and nonlinear models are consistent after the initial nonlinear stage. The CFRP calculation results by nonlinear VUMAT have an agreement well with the actual stress path. As a conclusion, the strain lag will occur when the initial non-linearity is considered. The contribution of this paper is to restore the practical problems encountered in engineering and provide the basis for engineering prediction.

Failure analysis of laminated structures by FEM based on nonlinear constitutive relationship

Micro Failure Analysis of Fiber Metal Laminates

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Progressive failure analysis of 2D woven composites at the meso-micro scale

An efficient micromechanics-based finite element model for failure analysis of laminated composites

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Finite Element Analysis of Progressive Failure and Strain Localization of Carbon Fiber/Epoxy Composite Laminates by ABAQUS

Geometrically Nonlinear Analysis of Laminated Compos ite Plates subjected to Uniform D istributed Load Using a New Hy- pothesis: the finite element method (FEM) Approach

Explanation of Strain Softening and Numerical Modeling to the Failure Process of Laminated Composite Material

A Constitutive Model for Carbon Fiber Reinforced Epoxy Resin Laminate under Compression Load: Considering the Initial Non-linearity

Progressive failure analysis of perforated composite laminates considering nonlinear shear effect

3D FEA Modelling of Laminated Composites in Bending and Their Failure Mechanisms

Numerical study on failure behavior of open-hole composite laminates based on LaRC criterion and extended finite element method

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

A nonlinear analytical model for tensile failure prediction of pseudo-ductile composite laminates

Finite Element Analysis On Load-Bearing Behavior Of Concrete Filled Steel Tubular Composite Framese

Failure Analysis of Carbon Fiber/epoxy Composite Cylindrical Laminates Using Explicit Finite Element Method

Progressive Failure Analysis of an Open-Hole Composite Laminate by Using the S-Version Finite-Element Method

Progressive Failure Analysis of Composite Laminates Subjected to Transverse Loading with Augmented Finite Element Method

Progressive fracture analysis of the open-hole composite laminates: experiment and simulation

Failures of laminates under nonpenetrative impacts