Abstract:Among alternative aromatic proton exchange membranes (PEMs) such as the perfluorosulfonic acid one, side-chain-type polymers have drawn great attention due to the formation of hydrophilic and hydrophobic domains and improvement in proton conductivity. In this work, we report the self-cross-linked sulfonated poly(ether ether ketone) with pendant sulfoalkoxy groups (SPEEK74-O-PAx) prepared by the reaction of hydroxy-functional SPEEK (SPEEK74-OH) with 1,3-propane sultone. The self-cross-linked networks are formed through the electrophilic aromatic substitution reaction catalyzed by protons from the grafted sulfopropyl groups without reducing the sulfonic acid groups. Higher tensile strength, lower water uptake, and in-plane swelling ratio but higher relative water retention than SPEEK74-OH are observed for SPEEK74-O-PAx. The proton conductivity of SPEEK74-O-PA100 is up to 0.1094 S cm–1 at 25 °C, and 0.2003 S cm–1 at 80 °C, which surpasses that of Nafion 212 at each temperature. The introduction of pendant flexible sulfoalkoxy side chains that are favorable for forming distinct steady hydrophilic and hydrophobic domains, and further confirmed by TEM images, can account for the high conductivity. Furthermore, SPEEK74-O-PA100 exhibits the highest power density of 1.358 W cm–2 at a current density of 3.0 A cm–2, which is superior to the performance of Nafion 212 (0.975 W cm–2) and at a high level for aromatic PEMs. The combination of a facile fabrication procedure and remarkable single cell performance enables SPEEK74-O-PAx to be promising membranes for PEM fuel cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00022?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00022</a>.1H NMR spectra of SPEEK74, SPEEK74-O-PA50, and SPEEK74-O-PA75; photographs of solubility test, relative water retention of PEMs; arrhenius plot of proton conductivity; SEM images of the surface of SPEEK74-OH and SPEEK74-O-PAx; single cell performance for H2/air PEMFCs; and summary of OCVs for various PEMs (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00022/suppl_file/ae1c00022_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Preparation and Properties of Ion Exchange Membranes for PEMFC with Sulfonic and Carboxylic Acid Groups Based on Polynorbornenes

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Diazoniabicyclo-type Poly (ionic Liquid) Cross-Linked Polybenzimidazole Membrane with Improved Phosphoric Acid Retention for HT-PEMFCs

Modified sulfonated poly(phthalazinone ether ketone) membranes with inorganic particles for potential applications in PEMFCs

Molecular Dynamics Simulation on Effect of Different Carboxylic Acid Group Contents on Norbornene Derivatives Proton Exchange Membranes Bearing Bifunctional Groups

High conductive and dimensional stability proton exchange membranes with an all-carbon main chain and densely sulfonated structure

Sulfonated poly(arylene ether sulfone)s membranes with distinct microphase-separated morphology for PEMFCs

Ring-Opening Metathesis Polymerization for the Preparation of Polynorbornene-Based Proton Exchange Membranes with High Proton Conductivity

Preparation of proton exchange membrane with intrinsic micropores constructing efficient ion transport channels based on segmented copolymer (sulfonated polyimide)

Considerations of the morphology in the design of proton exchange membranes: Cross-linked sulfonated poly(ether ether ketone)s using a new carboxyl-terminated benzimidazole as the cross-linker for PEMFCs

Proton exchange membranes based on sulfonated polybutylene fumarate: Preparation and characterization

Self-Cross-Linked Sulfonated Poly(ether ether ketone) with Pendant Sulfoalkoxy Groups for Proton Exchange Membrane Fuel Cells

Membranes from sulfonated block copolymer for use in proton exchange membrane fuel cells

Preparation of Graft Poly(Arylene Ether Sulfone)s-Based Copolymer with Enhanced Phase-Separated Morphology As Proton Exchange Membranes Via Atom Transfer Radical Polymerization

Influence of structure construction on water uptake, swelling, and oxidation stability of proton exchange membranes

Design, transport efficiency and structure-activity relationship of sulfonated poly (aryl ether ketone) proton exchange membrane based on multi-functional MOFs

High Performance Ion Exchange Membranes Prepared Via Direct Polyacylation of Racemic and (s)‐1,1′‐binaphthyl‐based Cationic/Anionic Monomers