Abstract:The construction of a 100-MeV high-intensity cyclotron, from which proton beam will be extracted through stripping to several proton beam lines for different users, has been completed at China Institute of Atomic Energy. Given that it is the H-ions that are to be accelerated in the machine, the peak field is only 1.35 T. To simplify the fabrication, the pole adopts straight sector instead of the spiral one. Meanwhile, vertical focusing should be sufficiently high to obtain high-current proton beam. All these demands make it particularly difficult for the design and fabrication of the main magnet, which is heavy in weight and challenging to meet precision requirement in fabrication. In the process, we have developed a high-performance parallel computation PIC code for beam dynamics of high-current cyclotrons and for FFAGs, which can be used for beam dynamic simulation at a very precise level. The result is then applied to guide the design, fabrication, installation, magnetic mapping, and shimming of the 416-ton main magnet with a precision requirement up to 0.05 mm. Another challenge is due to the deformations of the magnet without/with the vacuum. The whole map measured in the vacuum has to be completed in such a big machine for the first time in the world. The result shows that all requirements, including the isochronous field, vertical focusing, and imperfection fields, have been satisfied properly. The first beam and the stable beam for an 8-h commissioning test had been achieved on July 4 and July 25, 2014, respectively.

Superconducting Coil System R&D for a 230-Mev Superconducting Cyclotron

Design and Construction of the Main Magnet for a 230-MeV Superconducting Cyclotron

Construction Progress of Two Superconducting Cyclotrons for Proton Therapy and Proton Irradiation at CIAE *

Design and Test of Superconducting Magnet for 200 MeV Proton Cyclotron

Study on the rods structure of the superconducting coil for 230 MeV proton cyclotron

Developments for 230 MeV superconducting cyclotrons for proton therapy and proton irradiation

Magnetic Field Measurement, Shimming and Processing for 230 MeV Superconducting Cyclotron Main Magnet

Field Mapping System Design for the Superconducting Cyclotron CYCIAE-230

Quench Safety Simulation and Verification of Superconducting Coils for the SC200 Superconducting Cyclotron

Design, Construction, Installation, Mapping and Shimming for a 416 Ton Compact Cyclotron Magnet

Development of a Zero Rate Evaporation Cryogenic System for 200 MeV Proton Cyclotron

Mechanical Analysis and Curing Technology Study of Superconducting Coil for 230 MeV Proton Cyclotron

Investigation and quantitative simulation of beam physics for 230 MeV SC cyclotron under construction at CIAE

Magnet Design of an 800 MeV High Power Proton Cyclotron

Physical Beam Extraction Design of 300 MeV/A H2+ Variable Energy Superconducting Cyclotron

Computer Modeling of Magnet for SC200 Superconducting Cyclotron

Research and Development of the SC230 Superconducting Cyclotron for Proton Therapy

Commissioning of RF system of the 200 MeV proton cyclotron

Magnetic Field Optimization and Tolerance Study of a Medical Superconducting Cyclotron

Conceptual Design of an 800 Mev High Power Proton Driver

Comprehensive test stand for high-intensity cyclotron development