Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The pressing demand of Ti-6Al-4V (grade 5) in aerospace, medical, marine, and chemical processing industries has gained momentum in recent years due to its excellent properties such as high strength to weight ratio and corrosion resistance, bio-compatibility and a common material for additive manufacturing. Additive manufactured Ti-6Al-4V have higher mechanical properties as compared to wrought alloys due to difference in microstructure that negatively influences the machinability characteristics and also lacks ductility. The main limitation of fabricated additive manufactured (AMed) component is the poor surface quality, staircase effect and adhering of non-melted powder particles to the fabricated components. Again, fatigue life of components increases with decrease of surface roughness. Therefore the need of machining of AMed titanium alloys in recent years are gaining importance to eliminate these problems so that desired surface quality and tolerances can be achieved. Therefore the objective of the study is to develop additive manufactured Ti-6Al-4V through direct metal laser sintering process and investigate its machinability characteristics under flood cooling environment with respect to responses as tool wear, surface roughness, cutting temperature, and chip morphology. As most of the heat generated at the interfaces has been carried away through flood cooling, the rate of growth of tool wear, cutting temperature, surface roughness, and degree of serration decreases and thus makes the performance of AMed Ti alloys are comparable with wrought Ti alloys. The dominant tool wear mechanism during machining AMed Ti alloy have been found to be abrasion, chipping, adhesion, BUE, chemical interaction between titanium and cutting tool materials, coating delamination. Optimal parameters for multi-responses are 0.1 mm depth of cut, 0.1 mm/rev feed rate, and 70 m/min cutting speed and improved. Mathematical models are said to be significant and fitted well. Because of the improved machinability, AMed Ti alloys find itself suitable in industrial applications.

Machining Finish of Titanium Alloy Prepared by Additive Manufacturing

The State of the Art in Machining Additively Manufactured Titanium Alloy Ti-6Al-4V

Experimental Investigation of the Micro-Milling of Additively Manufactured Titanium Alloys: Selective Laser Melting and Wrought Ti6Al4V

Study on machinability characteristics of novel additive manufactured titanium alloy (Ti-6Al-4V) fabricated by direct metal laser sintering

Effect of Material Microstructure on Tool Wear Behavior During Machining Additively Manufactured Ti6Al4V

Dynamic Mechanical Properties and Machinability Characteristics of Selective Laser Melted and Forged Ti6Al4V

Additive manufacturing of titanium alloys with enhanced strength and uniform ductility via multi-element alloying

Overview of Machinability of Titanium Alloy (Ti6Al4V) and Selection of Machining Parameters

Machining properties of as-built additive manufactured Ti6Al4V titanium alloy through selective laser melting: a comprehensive investigation

Additive manufacturing of Ti-6Al-4V alloy- A review

Design of titanium alloys by additive manufacturing: A critical review

Comparative study on micro-milling machinability of titanium alloys prepared by different processes: Forging process, additive manufacturing process and heat-treatment process

Achieving Enhanced Tensile Strength-Ductility Synergy Through Phase Modulation in Additively Manufactured Titanium Alloys

Investigation on surface quality in micro milling of additive manufactured Ti6Al4V titanium alloy

Fabrication of Electron Beam Melted Titanium Aluminide: The Effects of Machining Parameters and Heat Treatment on Surface Roughness and Hardness

Advances in additively manufactured titanium alloys by powder b e d fusion and directed energy deposition: Microstructure, defects, and mechanical behavior

Investigation on surface integrity of electron beam melted Ti-6Al-4 V by precision grinding and electropolishing

Mechanical Behavior of Additive Manufacturing (AM) and Wrought Ti6Al4V with a Martensitic Microstructure

Investigation of surface finish and fatigue life of laser Powder Bed fused Ti-6Al-4V

Electrochemical and passive behaviors of Ti-Fe-B alloy manufactured via casting, forging and additive manufacturing

Experimental Investigation on Machinability of DMLS Ti6Al4V under Dry Drilling Process