Ligament-type Granulation of Molten Slag in Different Rotary Disk Configurations

Hao Peng,Xuekun Shan,Xiang Ling,Dongxiang Wang,Juan Li

DOI: https://doi.org/10.1016/j.applthermaleng.2017.09.132

IF: 6.4

2018-01-01

Applied Thermal Engineering

Abstract:Rotary disk granulation is an energy saving and more stable method for waste heat recovery from high temperature molten slag, and the quality and values of the generated cement product are primary determined by the granulating characteristic. The present work performed the analogue experiments in four types of rotary disks with Rosin/Paraffin mixture as the working fluid. The influence of rotary disk configurations on characteristics of ligament-type granulation, which include ligament number K-L ligament diameter d(L), capillary wavelength lambda and droplets mean diameter d(m) were investigated through visualized method. Also the mechanism of droplets pitch-off process was revealed. The results indicated that the surface tension forces that determine the most of ligament and droplet breakup processes. The K-L is predominately affected by We number, while the influence of RP mixture volume flow rate Q St number and disk configurations is negligible. The d(L) decreases with the increase in angular speed omega. The d(L) of arc-edge disk is lower than that of the flat/slotted/bulged-block disks due to the effect of gravity force. The short-wave mode is the dominant mode for droplets pinch-off process. Most of the predicted d(m) for different disk configurations are within the band of +/- 15% of the measured values, and the arc-edge disk configuration is recommended because it can produce the smallest droplets compared with the other types of disks. Accordingly, the correlations for K-L, d(L), lambda, and d(m) are proposed in a wide range of operational conditions. Further investigations will focus on the droplets characteristics, as well as the optimal design or selection of different disk configurations. (C) 2017 Elsevier Ltd. All rights reserved.