Abstract:Using an AMPT tester and based on laboratory tests, this paper performed a comparative study on the dynamic characteristics of different asphalt mixtures, analyzed the influence of different asphalt binders on the characteristic parameters of the dynamic modulus master curve and the phase angle master curve of asphalt mixture, and expounds the evaluation function of the phase angle master curve for mixture relaxation characteristics. The results show that the modulus master curve parameters of the asphalt mixture are closely related to voids in the mineral aggregate, mixture density, and asphalt content of the asphalt mixture. For the same kind of asphalt mixture, because the gradation of mineral aggregate is fixed and the volume parameters are almost the same, the ultimate modulus of the mixture at different temperatures is unique; when the temperature changes or the asphalt changes, the shape parameter β of the modulus master curve changes regularly, which brings different dynamic responses, and the lower β will show the characteristics of a higher modulus. Asphalt is the source of the viscoelasticity of the asphalt mixture. Although the influence of particle gradation of the mixture will bring about the change of modulus, the phase angle of the mixture depends on the viscoelastic properties of asphalt, and the initial phase angle in the main curve is positively correlated with asphalt penetration and negatively correlated with the softening point and viscosity, while the peak phase angle A is negatively correlated with penetration, and the softening point viscosity is positively correlated. The viscoelastic interval, represented by ω, is negatively correlated with penetration but positively correlated with the softening point and viscosity. The peak position, parameter ωc, of the phase angle master curve can evaluate the relaxation characteristics of the mixture, and the crack resistance of different mixtures can be compared without complex model calculation. In the comparison of the relaxation time of asphalt mixture, the relaxation time of foam cold-recycled mixture is the largest, which is significantly higher than that of other forms of cement mixture; the emulsified asphalt cold-recycled mixture is equivalent to AC20 and LSPM30 mixtures; the SBS-modified asphalt mixture has the best relaxation characteristics.

Using the Viscoelastic Parameters to Estimate the Glass Transition Temperature of Asphalt Binders

Method determining for glass transition temperature on asphalt binders based on MHN complex modulus model

Nonlinear Viscoelasticity and Viscoplasticity Characteristics of Virgin and Modified Asphalt Binders

Study of the Viscoelasticity for Fibrous High ViscoelasticAsphalt Sand

Research on High- and Low-Temperature Rheological Properties of High-Viscosity Modified Asphalt Binder

Investigation of Viscoelastic Properties of Polymer-Modified Asphalt at Low Temperature Based on Gray Relational Analysis

Nonlinear Viscoelastoplastic Kinetics for High-Temperature Performance of Modified Asphalt Binders

Time-temperature-aging-depth Shift Functions for Dynamic Modulus Master Curves of Asphalt Mixtures

Study on Viscoelastic Properties of Various Fiber-Reinforced Asphalt Binders

Investigation into Low-Temperature Performance of Asphalt Mixtures Based on Glass Transition Temperature

Study on the Phase Behavior of Asphalt Mastic

Predicting the Low-Temperature Performance of Asphalt Binder Based on Rheological Model

Characterizing Rheological Behavior of Asphalt Binder over A Complete Range of Pavement Service Loading Frequency and Temperature

Study on the Method of Determining Viscoelastic Parameters of Asphalt Binder

Prediction of low temperature properties using dynamic rheological properties of asphalt at intermediate temperature

Dynamic Viscoelastic Property of Hard-Grade Asphalt Mixture

Dynamic Characteristic Master Curve and Parameters of Different Asphalt Mixtures

Research on high- and low-temperature properties of asphalt-mineral filler mastic

Extension of Modified Havriliak-Negami Model to Characterize Linear Viscoelastic Properties of Asphalt Binders

Evaluating the Effect of Polymer Modification on the Low-Temperature Rheological Properties of Asphalt Binder

Dynamic viscoelastic properties of modified asphalt and mixture based on DSR