Abstract:Flow electrode capacitive deionization (FCDI) is a highly promising desalination technique known for its exceptional electrosorption capacity, making it suitable for efficient salt separation in high salinity water. However, the unsatisfactory charge transfer process between the flow electrode and current collector severely curtails the salt separation and enrichment performance of the FCDI device. To address this issue, three-dimensional titanium mesh (3D-TM) was proposed as a novel current collector for FCDI device, which significantly amplifies the charge transfer area and exhibits excellent salt separation performance. The 3D-TM current collector promotes the electron transfer, charge percolation, and ion migration processes through the electroconvection generated by the turbulence effect on the flow electrode. In the specific case of the 20-mesh 3D-TM, which is composed of 12 stacking layers of titanium mesh, the remarkable average salt removal rate and charge efficiency were achieved 5.06 μmol cm −2 min −1 and 92.9 % under an appropriate applied voltage of 2.0 V, respectively. Dramatically, the desalination performance maintained above 76.4 % over 100 desalination cycles at 2.0 V, demonstrating the exceptional cyclic stability of the 3D-TM FCDI cell. In the seawater desalination, the 3D-TM FCDI cell exhibited an impressive salt removal efficiency of 97.5 % (from 34.2 g L − 1 to 0.84 g L − 1 ) for 1 L East China seawater at 2.0 V for 24 h. For lithium-ion enrichment, the FCDI continuous desalting system achieved an astonishing concentration of 17.3 g L − 1 for Li + ions enrichment from an initial concentration of 1.30 g L − 1 , obtaining the average salt treating rate of 23.6 g m − 2 h − 1 and charge efficiency of 80.0 %. Moreover, the lithium-sodium ions and lithium-magnesium ions enrichments were both conducted, yielding an enriched concentration of 10.4 g L − 1 and 7.30 g L − 1 for Li + ions, respectively. These findings highlight the enormous potential of FCDI technology in industrial engineering applications, further establishing it as a highly viable solution.

Fractionation of Mono- and Divalent Ions by Capacitive Deionization with Nanofiltration Membrane.

Electrosorptive Desalination by Carbon Nanotubes and Nanofibres Electrodes and Ion-Exchange Membranes

A two-pronged strategy to boost the capacitive deionization performance of nitrogen-doped porous carbon nanofiber membranes

Preparation of heterogeneous cation exchange membrane and its contributions in enhancing the removal of Ni 2+ by capacitive deionization system

Tuning Capacitive Deionization Mechanisms by Changing Electrodes’ Properties and Charging Profile in a Multiscale Simulation Study

Electrodialysis with Nanofiltration Membrane (EDNF) for High-Efficiency Cations Fractionation

A novel asymmetric CDI device for targeted removal of cation in water desalination

Charge‐Sign‐Independent Separation of Mono‐ and Divalent Ions With Nanofiltration Membranes

Docked ions: Vertical-aligned tubular arrays for highly efficient capacitive deionization

Using Activated Carbon Fiber Separators to Enhance the Desalination Rate of Membrane Capacitive Deionization

Three-dimensional titanium mesh-based flow electrode capacitive deionization for salt separation and enrichment in high salinity water

Insight into the scaling behavior of capacitive deionization for the removal of multiple cation components in the single-pass mode

Multiscale MXene Engineering for Enhanced Capacitive Deionization via Adaptive Surface Charge Tailoring

Enhanced Charge Efficiency and Electrode Separation Utilizing Magnetic Carbon in Flow Electrode Capacitive Deionization

Simultaneous Fractionation, Desalination, and Dye Removal of Dye/Salt Mixtures by Carbon Cloth-Modified Flow-electrode Capacitive Deionization

Coupling ion-exchangers with inexpensive activated carbon fiber electrodes to enhance the performance of capacitive deionization cells for domestic wastewater desalination.

Capacitive deionization coupled with microbial fuel cells to desalinate low-concentration salt water.

Nanofibrous Composite Membranes (nfcms) for Mono/Divalent Cations Separation

Simultaneous regulation of pore size and surface charge of nanofiltration membrane using carbon quantum dots for improved selective separation

Positively Charged Modification of Commercial Nanofiltration Membrane to Enhance the Separation of Mono−/divalent Cation

Up-shifting the desalination rate limit of capacitive deionization via integrating chloride-capturing Bi nanocluster with flow-through cell architecture