Abstract:Transition metals, especially Ni, are considered highly efficient catalysts for enhancing the characteristics in ad/dehydrogenation of Mg alloy. The Ce 5 Mg 95- x Ni x ( x = 5, 10, 15) alloys were prepared by mechanical milling technology. The microstructure evolution of all samples during ad/dehydrogenation was characterized by XRD, SEM and TEM. The nanocrystalline and amorphous structure of the as-milled alloys include CeMg 12 , Mg and Mg 2 Ni phases. Increasing Ni content causes a significant increase in the Mg 2 Ni phase. By utilizing a Sievert apparatus and analyzing the test results from DSC and TGA, the kinetics of isothermal and non-isothermal hydrogen storage rates were investigated. Both the Arrhenius and Kissinger methods were utilized to estimate the dehydrogenation activation energy. The experimental samples possess exhibit good activation properties and can effectively store 5.0 wt.% of hydrogen. The new specific surface area resulting from the particle pulverization and rupture is responsible for the improved hydrogen sorption kinetics observed during activation. The onset dehydrogenation temperature of the sample decreased from 552.6 to 534.4 K, a reduction of 18.2 K, as the Ni content increased from x = 5 to 15. The dehydrogenation activation energy decreases from 73.68 to 59.99 kJ/mol when Ni is increased, and this is essentially what enhances the hydrogen storage facilitated by nickel substitution. The influence of Ni content variation on the decomposition enthalpy of MgH 2 is minimal. The absolute value of the decomposition enthalpy of MgH 2 (Δ H ) decreases from 75.57 to 75.30 kJ/mol as the Ni content increases from x = 5 to 15.

Role of Milling Time and Ni Content on Dehydrogenation Behavior of MgH 2 /ni Composite

Phase-structure and Hydrogen Storage Behaviors of Mg+10％ Ni2P Composite Prepared by Reactive Ball-Milling

Improved Hydrogen Storage Properties of MgH2 with Ni-based Compounds

Microstructure and Hydrogen Storage Characteristics of Nanocrystalline Mg+xwt% LaMg2Ni (x=0–30) Composites

Improved Hydrogen Storage Thermodynamics and Kinetics of As-Milled Ce-Mg-Ni-Based Alloys by Adding Ni

Influence of Ball-milling with Ni Powder on the Phase Structure and Electrochemical Hydrogen Storage Properties of Mg17Al12 Alloy

Effect of Ball Milling Time on Microstructure and Hydrogen Storage Properties of Nd5Mg41Ni Alloy

Synergistic function of milling time and Ni addition on microstructure and hydrogen storage properties of CeMg 12 type materials

Hydrogen Storage Properties of Nanocomposite Mg-Ni-MnO2 Made by Mechanical Milling

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

Research on hydrogen storage properties of Mg–3Ni–2MnO2(wt.%) milled with nickel powders of different particle sizes

Hydrogen storage properties of magnesium hydride catalyzed by Ni-based solid solutions

Hydrolysis of hydrided Mg-3Ni-2MnO2 Composites prepared by ball milling for hydrogen production

Improved hydrogen storage kinetic properties of magnesium-based materials by adding Ni<sub>2</sub>P

Hydrogen storage properties of nanocomposite Mg-Ni-V2O5

Exploring the Hydrogen Storage Performance of MgH2 Catalyzed by Two Transition Metals Ni and Co by In‐situ Calorimetry and Density Functional Theory Calculations

Effect of Ball-Milling Time on the Electrochemical Properties of La–Mg–Ni-based Hydrogen Storage Composite Alloys

Effect of Milling Intensity on the Formation of LiMgN from the Dehydrogenation of LiNH2–MgH2 (1:1) Mixture

Hydriding and Dehydriding Properties of Mg/Mg_(1.8)La_(0.2)Ni Nanocomposites

Hydrogenation Properties of Mechanically Milled Mg2Ni0.8Cr0.2-CoO/Al2O3 Composites.

Hydrogen storage properties of nanocomposite Mg–Ni–Cu–CrCl3 prepared by mechanical alloying