Abstract:Non-catalytic hydrolysis of CaMg2-based materials (abbreviated as CaMg2, CaMg2-0.1Ni, H-CaMg2, and H-CaMg2-0.1Ni hereinafter) fabricated by ball milling for hydrogen supply has been investigated in the present work. With respect to the as-melted counterparts, it is found that both milled CaMg2 and H-CaMg2-based samples can significantly enhance the hydrolysis performance via adjusting the milling durations. In particular, 0.5 h-milled CaMg2 and 3 h-milled H-CaMg2 exert optimal kinetics at ambient temperature, delivering a hydrogen yield of 539 mL g(-1) within 2 h and 1439 mL g(-1) of H-2 within only 3 min, respectively. In addition, the further results indicate that the hydrogen uptake of CaMg2 can be accelerated by doping with the Ni element, giving rise to considerably enhanced hydrolytic dynamics, as opposed to a limited promotion of the hydrolysis of the CaMg2 alloy. For example, the hydrogen yield of H-CaMg2-0.1Ni increases from 853 to 1147 mL g(-1) H-2 in 5 min with hydrogenation durations ranging from 0.5 to 1.5 h, much higher than the values (598-954 mL g(-1) H-2) of H-CaMg2 under the same conditions. More specifically, the 3 h-milled H-CaMg2 sample also demonstrates excellent cryogenic hydrolysis kinetics, achieving a hydrogen yield of 1332 mL g(-1) H-2 within 15 min at 0 degrees C. In comparison with the conventional hydrogenation of pristine CaMg2 conducted at elevated temperature, a more feasible strategy is applied to realize its hydrogen uptake by ball milling with Ni under mild conditions. Expectedly, the hydrogen supply capacities of the hydrogenated samples are markedly enhanced, making them promising to achieve their wide applications in hydrogen energy areas in the future.

Hydrolysis of hydrided Mg-3Ni-2MnO2 Composites prepared by ball milling for hydrogen production

Hydrogen Storage Properties of Nanocomposite Mg-Ni-MnO2 Made by Mechanical Milling

Hydrogen storage properties of nanocomposite Mg-Ni-V2O5

Phase-structure and Hydrogen Storage Behaviors of Mg+10％ Ni2P Composite Prepared by Reactive Ball-Milling

Mechanical Ball Milling Preparation and Electrochemical Hydrogen Storage Properties of Amorphous Mg-Fe Composites

Research on hydrogen storage properties of Mg–3Ni–2MnO2(wt.%) milled with nickel powders of different particle sizes

Enhanced hydrogen generation performance of CaMg<sub>2</sub>-based materials by ball milling

Microstructure and Hydrogen Storage Characteristics of Nanocrystalline Mg+xwt% LaMg2Ni (x=0–30) Composites

Hydrogen storage properties of nanocomposite Mg–Ni–Cu–CrCl3 prepared by mechanical alloying

Ultrafast Hydrogen Production via Hydrolysis of MgH2-NaH Composite

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

Preparation of Mg2Ni Hydrogen Storage Alloy Materials by High Energy Ball Milling

Hydrogen generation from the hydrolysis of Mg powder ball-milled with AlCl3

Nanomaterials for Hydrogen Storage Produced by Ball Milling

Hydrogen Storage Properties of a Mg-La-Fe-H Nano-Composite Prepared Through Reactive Ball Milling

Hydrogenation Properties of Mechanically Milled Mg2Ni0.8Cr0.2-CoO/Al2O3 Composites.

Preparation and hydrogen storage properties of Mg-20 wt.% Mg 2Ni0.8Cr0.2 composite with TiO2 nanoparticles

Hydrogen Production Via Hydrolysis of Mg-oxide Composites

Preparation and Hydrogen Storage Properties of Mg-20 Wt.% Mg<sub>2</sub>Ni<sub>0.8</sub>Cr<sub>0.2</sub> Composite with TiO<sub>2</sub> Nanoparticles

Improved Hydrogen Storage Performance of MgH2–LiAlH4 Composite by Addition of MnFe2O4

Phase-structural and Morphological Features, Dehydrogenation/re-Hydrogenation Performance and Hydrolysis of Nanocomposites Prepared by Ball Milling of MgH2 with Germanium