Abstract:One of the advantages of perovskite solar cells is able to be compatible with low-cost large-scale solution process via roll-to-roll technique. Green solvent engineering plays an important role in large-scale manufacture. N-methyl pyrrolidone (NMP) is considered to be low toxicity and biodegradable, which is less harmful to the human body and the environment. However, it is difficult to achieve high film quality for NMP-processed perovskite film in a short time. In this communication, we develop a two-step green anti-solvent engineering to fast tune the morphology of the NMP-processed perovskite film. The first step is to deposit ethyl acetate (EA) on top of the precursor film to induce fast nucleation. Secondly, methylammonium chloride (MACl) solution dissolved in isopropanol (IPA) is added to affect the crystal growth process and subsequently form a two-layer structured perovskite film including MAPbI3 as a bottom layer and mixed MAPbI3/MAPbIxCl1-x as an upper layer, respectively. The upper layer shows significantly enhanced degree of crystallinity and reduced trap states. It has been recognized that MAPbIxCl1-x has a wide bandgap with a higher LUMO level and a lower HOMO level than that of MAPbI3. Thus, the enrichment of Cl based perovskite near/at the surface can not only promote the efficient charge transfer, but also improve the VOC of PSCs. Furthermore, the limited content of MAPbIxCl1-x in MAPbI3 barely affects the whole absorption of the perovskite and thus JSC of the device. Thus, the as-prepared inverted PSC yields a high PCE of 16%, mainly attributing to obviously improved VOC and JSC, while the reference device containing the perovskite layer only treated by EA shows a PCE of 14.36%. Notably, NMP-processed perovskite film exhibits high transmittance of 22% in the 380−780 nm wavelength range, offering great potential in semi-transparent PSCs.

Compositional and Morphological Engineering of Mixed Cation Perovskite Films for Highly Efficient Planar and Flexible Solar Cells with Reduced Hysteresis

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Effects of Formamidinium and Bromide Ion Substitution in Methylammonium Lead Triiodide Toward High-Performance Perovskite Solar Cells

Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells.

Efficient and Non-Hysteresis CH3NH3PbI3/PCBM Planar Heterojunction Solar Cells

High-Performance Simple-Structured Planar Heterojunction Perovskite Solar Cells Achieved by Precursor Optimization.

Highly Efficient and Stable Inverted Planar Solar Cells from (fai)x(mabr)1−xpbi2 Perovskites

Metallohalide Perovskite–polymer Composite Film for Hybrid Planar Heterojunction Solar Cells

High-performance Planar Heterojunction Perovskite Solar Cells: Preserving Long Charge Carrier Diffusion Lengths and Interfacial Engineering

Dual Interfacial Modifications Enable High Performance Semitransparent Perovskite Solar Cells with Large Open Circuit Voltage and Fill Factor

High performance planar perovskite solar cells with a perovskite of mixed organic cations and mixed halides, MA1−xFAxPbI3−yCly

Alleviating Hysteresis and Improving Efficiency of MA1−yFAyPbI3−xBrx Perovskite Solar Cells by Controlling the Halide Composition

Fapbi(3) Flexible Solar Cells With A Record Efficiency Of 19.38% Fabricated In Air Via Ligand And Additive Synergetic Process

Incorporating an Inert Polymer into the Interlayer Passivates Surface Defects in Methylammonium Lead Halide Perovskite Solar Cells.

Efficient Perovskite Solar Cells with a Gradient Light Absorption Layer and Low VOC Loss Obtained by Interface Engineering

Fast and Controllable Electric-Field-Assisted Reactive Deposited Stable and Annealing-Free Perovskite toward Applicable High-Performance Solar Cells

Morphology Control towards Green Solvent System Processed High Performance Semitransparent CH3NH3PbI3 Film for Perovskite Solar Cell

Enhanced Efficiency and Mechanical Robustness of Flexible Perovskite Solar Cells by Using HPbI3 Additive

A Mechanically Robust Conducting Polymer Network Electrode for Efficient Flexible Perovskite Solar Cells

Efficient Bifacial Semitransparent Perovskite Solar Cells Using Ag/V2O5 As Transparent Anodes

Semitransparent CH3NH3PbI3 Films Achieved by Solvent Engineering for Annealing‐ and Electron Transport Layer‐Free Planar Perovskite Solar Cells