Abstract:High efficiency and mechanical stability are in great demand for commercial applications of the flexible perovskite solar cells (PSCs) in portable and wearable electronics. Herein, power conversion efficiency (PCE) and mechanical robustness of the methylammonium (MA)‐free flexible PSCs are simultaneously enhanced by incorporating a HPbI 3 additive with optimal content in the perovskite precursor solution. The HPbI 3 additive facilitates an improved morphology and crystallinity, as well as a decreased work function of the perovskite films, leading to improved device performance. As a result, PCEs of 20.1% and 18.74% are obtained for the rigid and flexible PSCs, respectively, which are among the best results for inverted MA‐free PSCs. The flexible PSCs maintain 95% and 70% of the initial PCE value after 1000 and 5000 bending cycles, respectively, at a bending radius of 4 mm. The current result reveals that using the HPbI 3 additive is a universal strategy to enhance performance of the flexible PSCs effectively and promote the development of the perovskite‐based photovoltaics.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to simultaneously improve the photoelectric conversion efficiency (PCE) and mechanical stability in flexible perovskite solar cells (PSCs). Specifically: 1. **Improving the photoelectric conversion efficiency**: Although rigid perovskite solar cells have achieved a relatively high photoelectric conversion efficiency (PCE), the PCE of flexible perovskite solar cells is relatively low. The paper optimizes the morphology and crystallinity of perovskite films by introducing HPbI₃ additives, thereby improving the device performance. 2. **Enhancing mechanical stability**: Flexible perovskite solar cells need to have good mechanical stability in practical applications to meet the requirements of portable and wearable electronic devices. The paper found through research that adding HPbI₃ additives can significantly improve the mechanical stability of flexible perovskite solar cells, enabling them to maintain a relatively high PCE after multiple bending cycles. ### Main research methods and results: - **The role of additives**: The paper studies the influence of different concentrations of HPbI₃ additives added to the perovskite precursor solution on device performance. The results show that when the content of HPbI₃ is 5%, the device performance is the best. - **Improvement of morphology and crystallinity**: SEM and AFM characterizations show that after adding HPbI₃, the grain size of perovskite films increases significantly, the surface roughness decreases, and the crystallinity improves. - **Energy level adjustment**: UPS tests indicate that after adding HPbI₃, the work function of perovskite films decreases, which helps to increase the open - circuit voltage (Voc). - **Performance improvement**: The optimized flexible perovskite solar cells reach PCEs of 20.1% and 18.74% on rigid and flexible substrates respectively, which are relatively good results in inverted - structure methylamine - free (MA) perovskite solar cells at present. - **Mechanical stability**: The flexible perovskite solar cells with 5% HPbI₃ maintain 95% and 70% of the initial PCE respectively after 1,000 and 5,000 bending cycles at a 4 - mm bending radius. ### Conclusion: By introducing HPbI₃ additives, the paper successfully improves the photoelectric conversion efficiency and mechanical stability of flexible perovskite solar cells, providing an effective strategy for the application of flexible perovskite solar cells in portable and wearable electronic devices.

Enhanced Efficiency and Mechanical Robustness of Flexible Perovskite Solar Cells by Using HPbI 3 Additive

Enhanced Efficiency and Mechanical Robustness of Flexible Perovskite Solar Cells by Using HPbI3 Additive

Flexible perovskite solar cells with simultaneously improved efficiency, operational stability, and mechanical reliability

Highly Efficient Flexible Perovskite Solar Cells Through Pentylammonium Acetate Modification with Certified Efficiency of 23.35%

Multiple Dynamic Hydrogen Bonding Networks Boost the Mechanical Stability of Flexible Perovskite Solar Cells

High‐Performance Flexible Perovskite Solar Cells via Precise Control of Electron Transport Layer

Fapbi(3) Flexible Solar Cells With A Record Efficiency Of 19.38% Fabricated In Air Via Ligand And Additive Synergetic Process

Dual-Interface-Reinforced Flexible Perovskite Solar Cells for Enhanced Performance and Mechanical Reliability

Macromonomer Crosslinking Polymerized Scaffolds for Mechanically Robust and Flexible Perovskite Solar Cells

Record Efficiency Stable Flexible Perovskite Solar Cell Using Effective Additive Assistant Strategy

Ameliorating the Interfacial Mismatch of SnO2 and Perovskite Enabling High Mechanical Stability for Flexible Perovskite Solar Cells

Porous Lead Iodide Layer Promotes Organic Amine Salt Diffusion to Achieve High Performance p‐i‐n Flexible Perovskite Solar Cells

Fabrication Toward Flexible Perovskite Solar Cells under Open Air Via Enhanced Intermolecular Chelation

Synergistic Toughening and Self‐Healing Strategy for Highly Efficient and Stable Flexible Perovskite Solar Cells

Buried Interface Optimization for Flexible Perovskite Solar Cells with High Efficiency and Mechanical Stability

Enhanced Molecular Interaction by Polymer Additive for Efficient and Stable Flexible Perovskite Solar Cells

Selective Chemical Etching to Remove 0D Cs4Pb(IBr)6 from Mixed‐Dimensional Perovskite Surface Achieving High Efficiency Flexible All‐Inorganic Perovskite Solar Cells with Superior Mechanical Durability

Highly flexible, robust, stable and high efficiency perovskite solar cells enabled by van der Waals epitaxy on mica substrate

SnO2 Surface Modification and Perovskite Buried Interface Passivation by 2,5‐Furandicarboxylic Acid for Flexible Perovskite Solar Cells

Enhanced flexibility and light utilization for high-efficiency all-air-processed carbon-based perovskite solar cells

Compositional and Morphological Engineering of Mixed Cation Perovskite Films for Highly Efficient Planar and Flexible Solar Cells with Reduced Hysteresis