NiSe2 Pyramids Deposited on N-doped Graphene Encapsulated Ni Foam for High-Performance Water Oxidation

Jing Yu,Qianqian Li,Cheng-Yan Xu,Na Chen,Yuan Li,Heguang Liu,Liang Zhen,Vinayak P. Dravid,Jinsong Wu

DOI: https://doi.org/10.1039/c6ta10303k

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Highly efficient water oxidation electrocatalysts made of low-cost and earth-abundant elements have been developed and demonstrated.

What problem does this paper attempt to address?

In-situ growth of graphene decorated Ni3S2 pyramids on Ni foam for high-performance overall water splitting

Jing Yu,Yue Du,Qianqian Li,Liang Zhen,Vinayak P. Dravid,Jinsong Wu,Cheng-Yan Xu

DOI: https://doi.org/10.1016/j.apsusc.2018.09.177

IF: 6.7

2019-01-01

Applied Surface Science

Abstract:•Graphene decorated Ni3S2 pyramids were prepared via simple solvothermal process.•The coupling of graphene enhances the conductivity of catalyst significantly.•Ni3S2@G pyramids exhibit superior and durable HER and OER activities.
Nise2-Anchored N, S-Doped Graphene/Ni Foam As A Free-Standing Bifunctional Electrocatalyst For Efficient Water Splitting

Jinhao Zhou,Zegao Wang,Dongxu Yang,Fei Qi,Xin Hao,Wanli Zhang,Yuanfu Chen

DOI: https://doi.org/10.1039/d0nr00879f

IF: 6.7

2020-01-01

Nanoscale

Abstract:It is still challenging to develop non-precious free-standing bifunctional electrocatalysts with high efficiency for hydrogen and oxygen evolution reactions. Herein, for the first time, we present a novel hybrid electrocatalyst synthesized via a facile hydrothermal reaction, which is constructed from ultrafine NiSe2 nanoparticles/nanosheets homogeneously anchored on 3D graphene/nickel foam (NiSe2/3DSNG/NF). This hybrid delivers superior catalytic performances for hydrogen/oxygen evolution reactions and overall water splitting: it shows an ultra-small Tafel slope of 28.56 mV dec(-1) for hydrogen evolution in acid, and a small Tafel slope of 42.77 mV dec(-1) for the oxygen evolution reaction; particularly, in a two-electrode setup for water splitting, it requires an ultra-small potential of 1.59 V to obtain 10 mA cm(-2) with nearly 100% faradaic efficiencies for H-2 and O-2. This study presents a new approach of catalyst design and fabrication to achieve highly efficient and low-cost water electrolysis.
Iron and nitrogen Co-doped CoSe 2 nanosheet arrays for robust electrocatalytic water oxidation

Di Li,Yingying Xing,Changjian Zhou,Yikai Lu,Shengjie Xu,Xiangli Shi,Deli Jiang,Weidong Shi

DOI: https://doi.org/10.1039/d1qi00113b

IF: 7.779

2021-01-01

Inorganic Chemistry Frontiers

Abstract:Fe–N–CoSe 2 electrocatalysts with good OER performance and long-term durability were synthesized using an anion and cation co-doping strategy.

chemistry, inorganic & nuclear
Rational Design of Cobalt-Iron Selenides for Highly Efficient Electrochemical Water Oxidation

Jun-Ye Zhang,Lin Lv,Yifan Tian,Zhishan Li,Xiang Ao,Yucheng Lan,Jianjun Jiang,Chundong Wang

DOI: https://doi.org/10.1021/acsami.7b08917

IF: 9.5

2017-01-01

ACS Applied Materials & Interfaces

Abstract:Exploring active, stable, earth-abundant, low-cost, and high-efficiency electrocatalysts is highly desired for large-scale industrial applications toward the low-carbon economy. In this study, we apply a versatile selenizing technology to synthesize Se-enriched Co1-xFexSe2 catalysts on nickel foams for oxygen evolution reactions (OERs) and disclose the relationship between the electronic structures of Co1-xFexSe2 (via regulating the atom ratio of Co/Fe) and their OER performance. Owing to the fact that the electron configuration of the Co1-xFexSe2 compounds can be tuned by the incorporated Fe species (electron transfer and lattice distortion), the catalytic activity can be adjusted according to the Co/Fe ratios in the catalyst. Moreover, the morphology of Co1-xFexSe2 is also verified to strongly depend on the Co/Fe ratios, and the thinner Co0.4Fe0.6Se2 nanosheets are obtained upon selenization treatment, in which it allows more active sites to be exposed to the electrolyte, in turn promoting the OER performance. The Co0.4Fe0.6Se2 nanosheets not only exhibit superior OER performance with a low overpotential of 217 mV at 10 mA cm-2 and a small Tafel slope of 41 mV dec-1 but also possess ultrahigh durability with a dinky degeneration of 4.4% even after 72 h fierce water oxidation test in alkaline solution, which outperforms the commercial RuO2 catalyst. As expected, the Co0.4Fe0.6Se2 nanosheets have shown great prospects for practical applications toward water oxidation.
A NiFe layered double hydroxide-decorated N-doped entangled-graphene framework: a robust water oxidation electrocatalyst

Narugopal Manna,Nadeema Ayasha,Santosh K. Singh,Sreekumar Kurungot

DOI: https://doi.org/10.1039/c9na00808j

IF: 5.598

2020-01-01

Nanoscale Advances

Abstract:This work introduces the synthesis and water oxidation reaction of the N-doped entangled graphene framework (NEGF) decorated with NiFe-LDH nanostructures (NiFe-LDH/NEGF) showing improved catalytic durability owing to its open and porous 3D structure.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
NiSe2/Ni5P4 nanosheets on nitrogen-doped carbon nano-fibred skeleton for efficient overall water splitting

Jing Yu,Yumeng Tian,Zaiwen Lin,Qi Liu,Jingyuan Liu,Rongrong Chen,Hongsen Zhang,Jun Wang

DOI: https://doi.org/10.1016/j.colsurfa.2021.126189

2021-04-01

Abstract:Combining a variety of factors to optimize the performances of electrocatalysts has become a new breakthrough for the development of low-cost electrolytic catalysts. In this work, we constructed N-doped carbon fibers as the substrate, which could provide high electronic conductivity and large surface area for the load of active catalysts, as well as close incorporation. The nanosheets morphology of NiSe2/Ni5P4 is conducive to enlarging the specific surface area and exposing more active sites. The electrical conductivity is improved by the selenide and carbon nano-fiber substrate. The multiple features, including the unique structure characteristics, heterostructure of NiSe2 and Ni5P4, and high electroconductivity, endow NiSe2/Ni5P4 with superior catalytic activity towards water splitting. As a result, the overpotentials at the cathode current density of 10 and 100 mA cm−2 upon NiSe2/Ni5P4 nanosheets are 112 and 350 mV in 0.5 M H2SO4. For oxygen evolution reaction (OER), the overpotential of NiSe2/Ni5P4 nanosheets at a current density of 10 mA cm−2 in alkaline electrolyte is 316 mV. Furthermore, the bifunctional NiSe2/Ni5P4 nanosheets exhibit excellent working stability for both HER, OER and overall water splitting, showing potential application in hydrogen energy.

chemistry, physical
Nickel-iron Selenide Polyhedral Nanocrystal with Optimized Surface Morphology As a High-Performance Bifunctional Electrocatalyst for Overall Water Splitting

Xianbiao Hu,Qingwei Zhou,Pengfei Cheng,Shaoqiang Su,Xin Wang,Xingsen Gao,Guofu Zhou,Zhang,Junming Liu

DOI: https://doi.org/10.1016/j.apsusc.2019.05.220

IF: 6.7

2019-01-01

Applied Surface Science

Abstract:Constructing earth-abundant and efficient electrocatalysts for overall water splitting are still in the research and exploration stage. In this work, the Fe-doped NiSe2 polyhedron nanocrystals grown on Ni foam (Ni0.75Fe0.Se-25(2)@NF) with controllable surface morphology are developed as high-performance bifunctional electrocatalysts. The surfaces of the optimized polyhedron nanocrystals provide high density of catalytic active sites. NiSe2 is originally a catalytic active substance, and the Fe doping in NiSe2 can greatly enhance the conductivity. The optimized Ni0.75Fe0.25Se2@NF (6 h) electrode are performed in an alkaline solution, exhibiting outstanding OER and HER activity with small overpotentials of 210 mV and-117 mV to reach current density of 10 mA cm(-2) and -10 mA cm(-2), respectively. Remarkably, the Ni0.75Fe0.25Se2@NF (6 h) electrode serve as cathode and anode in water splitting electrolyzer also demonstrates highly efficient overall water electrolysis performance, with a relatively low cell voltage of 1.61 V at 10 mA cm(-2) (1.57 V for RuO2(+)//Pt/C(-) couple) and excellent long-term stability of 50 h for overall water electrolysis.
2D MOF-derived porous NiCoSe nanosheet arrays on Ni foam for overall water splitting

Yue Zhou,Yanli Chen,Maobin Wei,Hougang Fan,Xiaoyan Liu,Qianyu Liu,Yumeng Liu,Jian Cao,Lili Yang

DOI: https://doi.org/10.1039/d0ce01527j

IF: 3.756

2021-01-01

CrystEngComm

Abstract:A novel 2D porous NiCoSe nanosheet arrays were grown on Ni foam using ZIF-67 as precursors, which exhibited outstanding bifunctional electrocatalytic activity and superior durability for overall water splitting.

chemistry, multidisciplinary,crystallography
NiSe 2 /FeSe 2 heterostructured nanoparticles supported on rGO for efficient water electrolysis

Muhammad Ahmad,Baojuan Xi,Yu Gu,Hua Zhang,Shenglin Xiong

DOI: https://doi.org/10.1039/d1qi01473k

IF: 7.779

2022-01-01

Inorganic Chemistry Frontiers

Abstract:Hybrid architectures composed of NiSe 2 /FeSe 2 heterostructured nanoparticles supported on rGO were synthesized through a facile self-templating strategy, and exhibited excellent electrocatalytic performance for overall water splitting.

chemistry, inorganic & nuclear
Selective Se doping of NiFe2O4 on an active NiOOH scaffold for efficient and robust water oxidation

Yuan Huang,Jian-Jun Wang,Yang Zou,Li-Wen Jiang,Xiao-Long Liu,Wen-Jie Jiang,Hong Liu,Jin-Song Hu

DOI: https://doi.org/10.1016/s1872-2067(20)63739-1

IF: 16.5

2021-08-01

Chinese Journal of Catalysis

Abstract:There remains a challenge in designing electrocatalysts for water oxidation to create highly efficient catalytic sites for the oxygen evolution reaction (OER) while maintaining their robustness at large outputs. Herein, an etching-assisted synthesis approach was developed to integrate highly active NiFe2O4 nanoparticles with a robust and active NiOOH scaffold directly on commercial stainless steel. A precise selenization strategy was then introduced to achieve selective Se doping of NiFe2O4 to further enhance its intrinsic OER activity while maintaining a three-dimensional NiOOH nanosheet array as a robust scaffold for prompt mass transfer and gas evolution. The resulting NiFe2O4−x Se x /NiOOH electrode exhibited superior electrocatalytic activity with low overpotentials of 153 and 259 mV to deliver benchmark current densities of 10 and 500 mA cm−2, respectively. More importantly, the catalyst exhibited remarkable durability at a stable current output of 100 mA cm−2 for hundreds of hours. These findings may open up opportunities for exploring efficient and robust electrocatalysts for scalable hydrogen production with practical materials.

chemistry, physical,engineering, chemical, applied
Strongly Coupled N-doped Graphene Quantum Dots/ni(fe)oxhy Electrocatalysts with Accelerated Reaction Kinetics for Water Oxidation

Wanjun Chang,Baoxing Ning,Qiucheng Xu,Hao Jiang,Yanjie Hu,Chunzhong Li

DOI: https://doi.org/10.1016/j.cej.2021.133068

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:Hybridization of metal hydroxides with conductive carbon materials is one of the effective strategies to alleviate their poor electron transfer and improve the slow kinetics of oxygen evolution reaction (OER). However, how to realize the stable and effective fabrication of the composite structure is urgently required but still a challenge. In this work, we constructed a novel electrocatalyst that abundant nitrogen-doped graphene quantum dots (NGQDs) are uniformly anchored on Ni(Fe)OxHy nanosheets through the strong M-N-C bonding. The synergistic effect between composite components greatly modifies the metal charge center with higher chemical valence and accelerates the hydroxylation process (*O ->*OOH) during OER process. Meanwhile, the smaller apparent activation energy (Ea) and faster proton coupled electron transfer (PCET) verify that the NGQDs/Ni(Fe)OxHy has more favorable reaction kinetics. Consequently, NGQDs/Ni(Fe)OxHy demonstrates an ultralow overpotential of 200 mV at 10 mA cm-2 with a long stability of 36 h. This work provides a viable method to realize the strong combination of carbon materials and metal hydroxides for excellent OER performance.
Nitrogen-coordinated Metallic Cobalt Disulfide Self-Encapsulated in Graphitic Carbon for Electrochemical Water Oxidation

Wei Zhang,Wenjuan Chen,Qin Xiao,Luo Yu,Chuqiang Huang,Gongxuan Lu,A. W. Morawski,Ying Yu

DOI: https://doi.org/10.1016/j.apcatb.2019.118449

2020-01-01

Abstract:Oxygen evolution reaction (OER) is a key process in electrochemical conversion technologies. The rational design of efficient catalyst and understanding of structure-property relationship in catalysis still remain grand challenge. Herein, nitrogen-coordinated CoS2 ultrafine nanoparticles (NPs) self-encapsulated in graphene (N-CoS2@graphene) are obtained through employing zeolitic imidazolate frameworks (ZIFs) as precursors. An insitu N-coordinated and graphene self-encapsulated strategy is developed to improve the catalytic activity and stability. As expected, the N-CoS2@graphene achieved an extremely low overpotentials of only 205 and 292 mV at the current density of 10 and 100 mA cm(-2) for OER, respectively, showing superior activities as compared with state-of-the-art transition-metal-based catalysts. Mechanism explorations reveal that the N-CoS2@graphene offers unique graphene self-encapsulated structure and modulated electron structure of the catalytic sites, which synergistically promotes intrinsic activity and stablility of catalyst. It is expected that the strategy presented here provides prospects for the design of other highly active electrocatalysts for energy conversion.
The FeOOH Decorated Fe-Doped Nickel Selenide Hierarchical Array for High-Performance Water Oxidation

Peican Wang,Yuqun Lin,Qin Xu,Lei Wan,Ziang Xu,Baoguo Wang

DOI: https://doi.org/10.1021/acs.iecr.1c02592

2021-01-01

Industrial & Engineering Chemistry Research

Abstract:For production hydrogen with water electrolysis to promote the development of a hydrogen-energy economy, it is crucial to develop efficient, durable, and non-noble metal electrocatalysts for the oxygen evolution reaction (OER). Transition metal selenides have been considered as promising alternatives for OER due to their excellent conductivity. Herein, FeOOH-decorated Fe-doped NiSe on NiFe foam (FeOOH@Fe-NiSe@NiFe) was synthesized with an autologous growth approach, where the NiFe foam was used as an Fe and Ni resource. The FeOOH@Fe-NiSe@NiFe electrode exhibits excellent electrocatalytic performance with an overpotential of 224 mV at 10 mA cm-2, a small Tafel slope of 52.67 mV dec-1, and remarkable stability. Results confirm that the morphology and electronic structure of designed electrocatalysts can be significantly tailored due to the introduction of Fe. The designed FeOOH@Fe-NiSe@NiFe electrode also possesses superior aerophobicity, which ensures fast mass transfer during water splitting processes. As a result, the electrocatalytic activity is improved remarkably. In addition, the actual active sites of designed electrocatalysts were also systematically investigated. Experimental studies demonstrate that the Fe/NiOOH on the surface of Fe-NiSe, which in situ converses from Fe-NiSe, can serve as the intrinsic active sites toward the OER. Thus, this work can provide a new methodology to designing durable and efficient electrocatalysts.
In Situ Phosphoselenization Induced Heterointerface Engineering Endow NiSe2/Ni2P/FeSe2 Hollow Nanocages with Efficient Water Oxidation Electrocatalysis Performance

Jiongting Yin,Cheng Wang,Jie Li,Kewang Zhang,Zhengying Wu,Ning Wang,Yukou Du

DOI: https://doi.org/10.1039/d2nr07019g

2022-01-01

Abstract:Exploiting Earth-abundant and highly effective electrocatalysts toward the oxygen evolution reaction (OER) is critical for boosting water splitting efficiency. Herein, we proposed a novel in situ phosphoselenization strategy to fabricate heterostructured NiSe2/Ni2P/FeSe2 (NiFePSe) nanocages with a modified electronic structure and well-defined nanointerfaces. Owing to the strong interfacial coupling and synergistic effect among the three components, the prepared NiFePSe nanocages exhibit superior OER performance with an ultralow overpotential of 242 mV at 10 mA cm-2 and a small Tafel slope of 55.8 mV dec-1 along with robust stability in 1 M KOH. Remarkably, the highly open 3D porous architecture, delicate internal voids, and numerous surface defects endow the NiFePSe nanocages with abundant active sites and enhanced electron mobility. In addition, the super-hydrophilic surface is conducive to facilitating mass transfer between the electrolyte and electrode and rapidly releasing the bubbles. This work may lead to new breakthroughs in the tuning of multi-component transition metal catalysts and the designing of highly active and durable materials for water splitting.
Nitrogen-Doped Graphene Supported Cose2 Nanobelt Composite Catalyst for Efficient Water Oxidation

Min-Rui Gao,Xuan Cao,Qiang Gao,Yun-Fei Xu,Ya-Rong Zheng,Jun Jiang,Shu-Hong Yu

DOI: https://doi.org/10.1021/nn500880v

IF: 17.1

2014-01-01

ACS Nano

Abstract:The slow kinetics of the oxygen evolution reaction (OER) greatly hinders the large-scale production of hydrogen fuel from water splitting. Although many OER electrocatalysts have been developed to negotiate this difficult reaction, substantial progresses in the design of cheap, robust, and efficient catalysts are still required and have been considered a huge challenge. Here, we report a composite material consisting of CoSe2 nanobelts anchored on nitrogen-doped reduced graphene oxides (denoted as NG-CoSe2) as a highly efficient OER electrocatalyst. In 0.1 M KOH, the new NG-CoSe2 catalyst afforded a current density of 10 mA cm(-2) at a small overpotential of mere 0.366 V and a small Tafel slope of similar to 40 mV/decade, comparing favorably with the state-of-the-art RuO2 catalyst. This NG-CoSe2 catalyst also presents better stability than that of RuO2 under harsh OER cycling conditions. Such good OER performance is comparable to the best literature results and the synergistic effect was found to boost the OER performance. These results raise the possibility for the development of effective and robust OER electrodes by using cheap and easily prepared NG-CoSe2 to replace the expensive commercial catalysts such as RuO2 and IrO2.
Nitrogen-Doped Carbon-Encased Bimetallic Selenide for High-Performance Water Electrolysis

Cao Junhui,Wang Kexin,Chen Jiayi,Lei Chaojun,Yang Bin,Li Zhongjian,Lei Lecheng,Institute of Zhejiang University - Quzhou,Ostrikov Kostya

DOI: https://doi.org/10.1007/s40820-019-0299-4

IF: 26.6

2019-01-01

Nano-Micro Letters

Abstract:Demand of highly efficient earth-abundant transition metal-based electrocatalysts to replace noble metal materials for boosting oxygen evolution reaction (OER) is rapidly growing. Herein, an electrochemically exfoliated graphite (EG) foil supported bimetallic selenide encased in N-doped carbon (EG/(Co, Ni)Se2–NC) hybrid is developed and synthesized by a vapor-phase hydrothermal strategy and subsequent selenization process. The as-prepared EG/(Co, Ni)Se2–NC hybrid exhibits a core–shell structure where the particle diameter of (Co, Ni)Se2 core is about 70 nm and the thickness of N-doped carbon shell is approximately 5 nm. Benefitting from the synergistic effects between the combination of highly active Co species and improved electron transfer from Ni species, and N-doped carbon, the EG/(Co, Ni)Se2–NC hybrid shows remarkable electrocatalytic activity toward OER with a comparatively low overpotential of 258 mV at an current density of 10 mA cm−2 and a small Tafel slope of 73.3 mV dec−1. The excellent OER catalysis performance of EG/(Co, Ni)Se2–NC hybrid is much better than that of commercial Ir/C (343 mV at 10 mA cm−2 and 98.1 mV dec−1), and even almost the best among all previously reported binary CoNi selenide-based OER electrocatalysts. Furthermore, in situ electrochemical Raman spectroscopy combined with ex situ X-ray photoelectron spectroscopy analysis indicates that the superb OER catalysis activity can be attributed to the highly active Co–OOH species and modified electron transfer process from Ni element.
NiSe@Ni1−xFexSe2 Core–Shell Nanostructures As a Bifunctional Water Splitting Electrocatalyst in Alkaline Media

Dmitrii Rakov,Chunyu Sun,Ziang Lu,Siwei Li,Ping Xu

DOI: https://doi.org/10.1002/aesr.202100071

2021-01-01

Advanced Energy and Sustainability Research

Abstract:Herein a facile synthesis methodology is reported that results in a unique 3D NiSe@Ni1−xFexSe2 core–shell nanostructure on nickel foam substrate, where Ni1−xFexSe2 nanosheets are fabricated on NiSe nanowires through an iron‐doping‐induced phase transformation process under solvothermal conditions. This material demonstrates stable hydrogen and oxygen evolution activity in 1.0 m KOH with a small overpotential of 153 mV@−10 mA cm−2 and 236 mV@100 mA cm−2, respectively. Furthermore, an efficient and stable water electrolyzer with NiSe@Ni1−xFexSe2/nickel foam as both anode and cathode is fabricated, which requires a low overpotential of 1.60 V to deliver a current density of 10 mA cm−2. Such ion‐doping‐induced phase transformation paves a new way for fabricating highly efficient electrocatalysts for energy storage and conversion.
NiSe and Fe-Based Layerd Double Hydroxide Nanosheet/Ni Foam Bifunctional Catalyst for Water Splitting

Zhiyi Pan,Zheng Tang,Muhammad Yaseen,Yongzhong Zhan

DOI: https://doi.org/10.1021/acsanm.2c03764

IF: 6.14

2022-10-20

ACS Applied Nano Materials

Abstract:The efficiency of overall water splitting (OWS) can be enhanced by developing active and stable bifunctional catalysts to accelerate the kinetics of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). In this work, a class of hierarchical NiSe@MFe-LDH (M = Ni, Co, Mn, or Zn) heterostructure nanosheet arrays on nickel foam was constructed through hybridizing NiSe and Fe-based layered double hydroxide (LDH). Benefiting from the unique sheet-on-sheet structure and synergistic effect of heterostructure by combining the merits of NiSe and MFe-LDH, NiSe@MFe-LDH/NF exhibited excellent catalytic performances for OER, HER, and OWS. The resultant NiSe@NiFe-LDH/NF requires low overpotentials for OER (244 mV) and HER (193 mV) to achieve a current density of 100 mA cm–2, respectively. For OWS, at the potentials of 1.512 and 1.705 V, the respective current densities were 10 and 100 mA cm–2, which are superior to the RuO2/NF||Pt/C/NF (1.552 and 1.722 V) and many reported state-of-the-art catalysts. This electrode remained active and stable for 100 h in 1.0 M KOH media. This work suggests that the sheet-on-sheet structure, binder-free electrode, and heterostructure nanocomposite can synergistically boost catalytic performances and hence provides a promising strategy for developing efficient and robust catalysts for OWS.

materials science, multidisciplinary,nanoscience & nanotechnology
Single Layer Graphene Encapsulating Non-Precious Metals As High-Performance Electrocatalysts for Water Oxidation

Xiaoju Cui,Pengju Ren,Dehui Deng,Jiao Deng,Xinhe Bao

DOI: https://doi.org/10.1039/c5ee03316k

IF: 32.5

2016-01-01

Energy & Environmental Science

Abstract:Single layer graphene encapsulating earth-abundant 3d transition metal nanoparticles exhibits excellent activity and durability for water oxidation, even exceeding IrO2.
Control Synthesis of Nickel Selenides and Their Multiwalled Carbon Nanotubes Composites As Electrocatalysts for Enhanced Water Oxidation

Shuai Chen,Jian-Li Mi,Peng Zhang,Yong-Hai Feng,Yang-Chun Yong,Wei-Dong Shi

DOI: https://doi.org/10.1021/acs.jpcc.8b09259

2018-01-01

Abstract:Development of efficient and noble metal-free catalysts for oxygen evolution reaction (OER) is of great importance for practical energy related technologies. Herein, one-step hydrothermal method is developed for the synthesis of a series of nickel selenides (NiSe2, NiSe, and Ni3Se2) and their multiwalled carbon nanotubes (MWCNTs) nanocomposites as electrocatalysts for OER Among the NiSe2, NiSe, and Ni3Se2 catalysts, NiSe shows the highest activity, exhibiting an overpotential of 389 mV to achieve 10 mA/cm(2) and a Tafel slope of 93 mV/dec in 1 M KOH. We further report a facile preparation of nickel selenides nanocrystals (particle size of 10 nm) grown on MWCNTs. The NiSe/MWCNTs nanocomposite shows improved activity toward OER, with an overpotential of 336 mV to reach similar to 10 mA/cm(2) and a Tafel slope of 78 mV/dec, which is close to the state-of-the-art RuO2 catalyst. The addition of MWCNTs during the synthesis not only introduces an abundance of nucleation sites, resulting in small particle sizes of NiSe crystals, but also improves the dispersion of NiSe nanoparticles. The small particle size and good dispersion of NiSe nanoparticles are beneficial to providing abundant active catalytic sites. In addition, the porous and conductive MWCNTs facilitate the electronic transmission and the electrolyte penetration. Furthermore, NiSe/MWCNTs nanocomposite also exhibits good long-term stability.

NiSe2 Pyramids Deposited on N-doped Graphene Encapsulated Ni Foam for High-Performance Water Oxidation

In-situ growth of graphene decorated Ni3S2 pyramids on Ni foam for high-performance overall water splitting

Nise2-Anchored N, S-Doped Graphene/Ni Foam As A Free-Standing Bifunctional Electrocatalyst For Efficient Water Splitting

Iron and nitrogen Co-doped CoSe 2 nanosheet arrays for robust electrocatalytic water oxidation

Rational Design of Cobalt-Iron Selenides for Highly Efficient Electrochemical Water Oxidation

A NiFe layered double hydroxide-decorated N-doped entangled-graphene framework: a robust water oxidation electrocatalyst

NiSe2/Ni5P4 nanosheets on nitrogen-doped carbon nano-fibred skeleton for efficient overall water splitting

Nickel-iron Selenide Polyhedral Nanocrystal with Optimized Surface Morphology As a High-Performance Bifunctional Electrocatalyst for Overall Water Splitting

2D MOF-derived porous NiCoSe nanosheet arrays on Ni foam for overall water splitting

NiSe 2 /FeSe 2 heterostructured nanoparticles supported on rGO for efficient water electrolysis

Selective Se doping of NiFe2O4 on an active NiOOH scaffold for efficient and robust water oxidation

Strongly Coupled N-doped Graphene Quantum Dots/ni(fe)oxhy Electrocatalysts with Accelerated Reaction Kinetics for Water Oxidation

Nitrogen-coordinated Metallic Cobalt Disulfide Self-Encapsulated in Graphitic Carbon for Electrochemical Water Oxidation

The FeOOH Decorated Fe-Doped Nickel Selenide Hierarchical Array for High-Performance Water Oxidation

In Situ Phosphoselenization Induced Heterointerface Engineering Endow NiSe2/Ni2P/FeSe2 Hollow Nanocages with Efficient Water Oxidation Electrocatalysis Performance

Nitrogen-Doped Graphene Supported Cose2 Nanobelt Composite Catalyst for Efficient Water Oxidation

Nitrogen-Doped Carbon-Encased Bimetallic Selenide for High-Performance Water Electrolysis

NiSe@Ni1−xFexSe2 Core–Shell Nanostructures As a Bifunctional Water Splitting Electrocatalyst in Alkaline Media

NiSe and Fe-Based Layerd Double Hydroxide Nanosheet/Ni Foam Bifunctional Catalyst for Water Splitting

Single Layer Graphene Encapsulating Non-Precious Metals As High-Performance Electrocatalysts for Water Oxidation

Control Synthesis of Nickel Selenides and Their Multiwalled Carbon Nanotubes Composites As Electrocatalysts for Enhanced Water Oxidation