System Design and Theoretical Analysis of Lignite-fired CHP Based on Lignite Pre-drying and Waste Heat Recovery from Dryer Exhaust
YAO Wei,WANG Zhichao,TU Jingyi,LIU Ming,YAN Junjie
DOI: https://doi.org/10.13334/j.0258-8013.pcsee.161035
2017-01-01
Abstract:A lignite-fired combined heat and power (CHP) based on lignite pre-drying and waste heat recovery was proposed in this paper to increase the lignite utilization efficiency and recover water from dryer exhaust.A 1000MW lignite-fired power plant was used as a reference case.Thermodynamic models were developed,with which the energy and water saving benefits were quantitatively analyzed.Results showed that if the moisture content in lignite is pre-dried to 25％,20％,15％,10％ and 5％ from 37.60％,the standard coal consumption rate for power generation could be respectively decreased by 6.49,7.89,9.08,10.15,and 11.10g/(kW·h).If the waste heat of the dryer exhaust Could be recovered to supply heat to communal heating system,the standard coal consumption rate for power generation could be further decreased by 8.43,10.87,12.96,14.77 and 16.36g/(kW.h).At the same time,93.1,121.3,146.0,167.7,and 187.0t/h water could be recovered.Finally,the arrangement of system and the exhaust heater were designed preliminarily taking moisture content been dried to 15％ as an example.