Abstract:Alkyl-substituted dibenzothiophenes such as 4,6-dimethyldibenzothiophene are a kind of typical refractory sulfur compound in fuel oil. Herein, three-dimensional ordered macro–mesoporous (3DOM) tungsten oxide catalysts were successfully prepared for aerobic oxidative desulfurization of 4,6-dimethyldibenzothiophene. The experimental results indicated that the as-prepared material 3DOM WOx-400 not only contained a hexagonal packed nanoporous structure but also abundant oxygen defects on its skeleton, exhibiting aerobic oxidative desulfurization of over 99% in 4 h. Moreover, sulfur removal could still reach 99% after recycling five times. Through free radical capture experiments, the superoxide radical is reasonably proposed in the mechanism. This work would provide a feasible route to develop highly efficient nanoporous materials for desulfurization of fuels.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c02639?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c02639</a>.TGA profiles of the precursor with PMMA (A) and without PMMA (B) (Figure S1); FT-IR spectra of the precursor mixture at different calcination stages (Figure S2); SEM image of the PMMA sphere alloy as the template (Figure S3); macropore diameter distribution of 3DOM WOx-400 (Figure S4); Raman spectrum of commercial WO3 (Figure S5); XPS full-scan spectra of various samples (Figure S6); comparison on W 4f peaks of 3DOM WOx-400 and WOx-400 (Figure S7); W 4f core-level of 3DOM WOx-300 and 3DOM WOx-500 (Figure S8); EPR spectra of various samples (Figure S9); effect of the reaction temperature on sulfur removal in the desulfurization system (Figure S10); GC–MS analysis for the extractant of the catalyst phase after the reaction (Figure S11); SEM images of recycled 3DOM WOx-400 (Figure S12); FT-IR spectra of fresh and recycled 3DOM WOx-400 (Figure S13) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c02639/suppl_file/an0c02639_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Preparation of WO3/g-C3N4 composites and their application in oxidative desulfurization

Preparation of Wo3/C Composite and Its Application in Oxidative Desulfurization of Fuel

Preparation of NiWO4/g-C3 N4 and its ultra-deep desulfurization properties in ionic liquid

Preparation of MoO 2 /g-C 3 N 4 Composites with a high surface area and its Application in Deep Desulfurization from Model Oil

The Green Preparation of Mesoporous WO3/SiO2 and Its Application in Oxidative Desulfurization

Preparation of MoO3/g-C3N4 catalyst and its application in the oxidation desulfurization of model oil

Ultrasound-assisted Oxidative Desulfurization of Simulated Oil Using g-C3N4

Study of the preparation of CuWO4/C composite and it's application in oxidative desulfurization of model oil

Preparation of CoWO4/g-C3N4 and Its Ultra-Deep Desulfurization Property

Polycrystalline Phase WO3/g-C3N4 As a High Efficient Catalyst for Removal of DBT in Model Oil

Aerobic Oxidative Desulfurization by Nanoporous Tungsten Oxide with Oxygen Defects

Preparation of highly active g-C3N4 supported amphiphilic quaternary ammonium phosphotungstate catalyst for solvent-free oxidative desulfurization of benzothiophene

Preparation of NiWO4 Catalyst and Its Application in the Oxidation Desulfurization of Model Oil

Catalytic Activity of MnWO4@g-C3N4 and CuWO4@g-C3N4 Nano-Composites for Green Fuel Production

Amorphous Cr2WO6-Modified WO3 Nanowires with a Large Specific Surface Area and Rich Lewis Acid Sites: A Highly Efficient Catalyst for Oxidative Desulfurization

Development of graphitic carbon nitride supported novel nanocomposites for green and efficient oxidative desulfurization of fuel oil

Preparation of desulfurization adsorbent containing ZnO and study on its desulfurization performance

Preparation of magnetic urchin-like NiCo 2 O 4 powders by hydrothermal synthesis for catalytic oxidative desulfurization

Preparation of Hollow Niobium Oxide Nanospheres with Enhanced Catalytic Activity for Oxidative Desulfurization

Fabrication and Characterization of Highly Efficient As-Synthesized WO3/Graphitic-C3N4 Nanocomposite for Photocatalytic Degradation of Organic Compounds

Carbon Nitride Nanosheets Decorated with WO3 Nanorods: Ultrasonic-assisted Facile Synthesis and Catalytic Application in the Green Manufacture of Dialdehydes