Abstract:The electro-hydraulic power source with an electro-hydraulic variable pump driven by a servo motor is suitable for electrified construction machinery. To achieve better energy efficiency in different working conditions, the multi-mode control scheme was proposed for the electro-hydraulic power source. The control scheme includes pressure control, flow control, and torque control modes. The switching rule among the three control modes was formulated based on the minimum pump pressure. The fuzzy PID controller was designed, and a composite flow regulation strategy was formulated, including the load-sensitive adaptive displacement regulation and servo motor variable speed regulation. The AMESim-Simulink co-simulation model of multi-mode control was established. The test platform was built, and the experimental study was carried out. The results indicate that the fuzzy PID control has a shorter response time and a more stable control effect compared with PID control. Additionally, the composite flow regulation strategy improves the flow regulation range by 36% and reduces the flow overshoot by 20% compared with the load-sensitive adaptive displacement regulation. As the main control valve received an opening step signal, the full flow regulation (7~81 L/min) of the power source took approximately 0.5 s to rise and 0.2 s to fall. The relative error of pressure difference for the main control valve was 0.63%. When receiving the pressure and torque step signal, the pump pressure and pump input torque both took approximately 0.45 s to rise and 0.2 s to fall. The relative errors of pump pressure and torque control were 0.2% and 0.16%, respectively. In the multi-mode control, the electro-hydraulic power source could switch smoothly between flow control mode, pressure control mode, and torque control mode. These results provide a reference for the multi-mode control of an electro-hydraulic power source with an electro-hydraulic variable pump driven by a servo motor.

Modeling and control of multi-modes charge pump with improved efficiency over wide input and load range

Design and Implementation of High-Efficiency and Low-Power DC-DC Converter with PWM/PFM Modes

PWM/PSM Dual-Mode Controller for High Efficiency DC-DC Buck Converter

A high efficiency regulated charge pump over wide input and load range

A Multi-Modes Charge-Pump Based High Efficiency Wide Input Range DC-DC Converter

Modeling and Realization of Variable Frequency Mode and Pulse Skipping Mode Controlled Charge Pump

Modeling and Control for DC-DC Converters Based on Hybrid System

Multi-mode Control Strategy for Primary-Side Regulation System

A High-Efficient, Multi-Phase Charge Pump Scheme

1MHz multi mode regulated charge pump with improved light load efficiency without sacrificing output ripple

Super Capacitor Energy Storage System's Charging Design Based on Composite Control Mode

Optimization of Charge Pump Based on Piecewise Modeling of Output-Voltage Ripple

An Efficient Step-up and Step-down Dual-output Charge Pump Controlled by Finite State Machine

Multi-mode control strategy in three-level DC-DC converter for higher efficiency operation under light-load and standby conditions

Research on Multi-Mode Control of Electro-Hydraulic Variable Displacement Pump Driven by Servo Motor

A Charge-Pump-Based SIMO Buck-Boost DC-DC Converter with Three Operation Modes

Multi-Objective Optimization Control of A Four-Level Hybrid-Clamped Inverter

Analysis and Design of Multi-Mode Buck DC/DC Converter

A Dual-Sided Control Strategy Based on Mode Switching for Efficiency Optimization in Wireless Power Transfer System

Research and Design of an On-Chip High Efficiency Dual-Output Charge Pump

A Hybrid Mode Control Strategy for LCC–LCC - Compensated WPT System With Wide ZVS Operation