Abstract:In this study, we aimed to investigate the effect of repeated impact loading on the fatigue and failure behaviors of AA6061-T6. An improved drop hammer impact testing machine was utilized for the experimental tests of U-notched three-point bending specimens under different impact energies. Based on the microscopic fracture features, we selected the Gurson-Tvergaard-Needleman (GTN) model as the damage model for AA6061. Then, we established a numerical implementation of impact damage accumulation-based FEM simulation. By calibrating the parameters of the GTN model, we were able to achieve the impact progressions of U-notched three-point bending specimens under repeated impacts. The testing results indicate that the impact fatigue life decreases exponentially with increasing impact energy. As the repeated impact energy increases, the fracture surfaces transition from visible fatigue striations to abundant ductile microvoids. Comparison between the experimental tests and the numerical simulations of the U-notched three-point bending specimens reveals a high degree of consistency in terms of life and crack propagation for the repeated impacts with high impact energy. This demonstrates the good applicability of the GTN model in capturing the repeated impact behavior of AA6061 under high impact energy. Furthermore, the simulations indicate that the specimen's notch experiences tension, compression, and reverse yield processes due to the rebound of the specimen in a single impact. This leads to a slight reduction in the void volume fraction during repeated impacts.

Continuum Damage Mechanics-Based Approach to the Fatigue Life Prediction for 7050-T7451 Aluminum Alloy with Impact Pit

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

Fatigue analysis for the aluminum alloy 7050-T7451 performed by a two scale continuum damage mechanics model

Fatigue evaluation on the effect of impact pits with various impact conditions by a CDM‐based approach

Fatigue tests and damage model development on Al-Si-Mg aluminum alloys with low-velocity impact pit

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Fatigue crack growth and life prediction of 7075-T62 aluminium-alloy thin-sheets with low-velocity impact damage under block spectrum loading

A new combined impact fatigue damage model and its application of influencing factors analysis on impact fatigue of TC18 titanium alloy

Continuum damage mechanics-based fatigue life prediction of L-PBF Ti-6Al-4V

Structural mechanics model for anisotropic damage and fatigue life prediction method of face-centered cubic metal materials

Damage analysis of aluminum alloy gusset joints under cyclic loading based on continuum damage mechanics

The experimental and numerical study of AA6061-T6 aluminum alloy under repeated impacts

Fatigue life prediction of 2524‐T3 and 7075‐T62 thin‐sheet aluminium alloy with an initial impact dent under block spectrum loading

Fatigue life prediction of aluminum alloy 6061 based on defects analysis

Prediction of Fatigue Crack Initiation of 7075 Aluminum Alloy by Crystal Plasticity Simulation

Fatigue tests and a damage mechanics-based fatigue model on a cast Al-Si-Mg aluminum alloy with scratches

Multiaxial Fatigue Lifetime Estimation Based on New Equivalent Strain Energy Damage Model under Variable Amplitude Loading

An engineering model of fatigue crack growth under variable amplitude loading

Antithymocyte globulin or interleukin 2 receptor antibody for immunosuppressive induction therapy after orthotopic liver transplantation: a follow-up study.

Study on Fatigue Life of Aluminum Alloy 6061-T6 Based on Random Defect Characteristics