Abstract:Three-dimensional (3D) printing technology is serving as a promising approach of fabricating titanium (Ti) and its alloys used for bone tissue engineering. However, the biological inertness nature of Ti material limits its capability to bind directly with the bone tissue. This paper aims to enhance the bioactivity and osteogenesis of 3D printed Ti-6Al-4V implants by constructing a hierarchical micro/nano-topography on the surface. Ti-6Al-4V implants were prepared by the electron beam melting (EBM) technique. A method combining ultrasonic acid etching with anodic oxidation is proposed for surface modification of EBM Ti-6Al-4V implants in this study. The acid etching step was to remove any existent residual powders on the implant's surface and construct micro-pits and-grooves on the EBM microrough surface. Nanotube arrays with a diameter of 40-50 nm were superimposed on the micro-structured substrate via anodic oxidation. The results of in vitro experiments showed that the hierarchical micro/nano-structured surface on Ti-6Al-4V after acid etching and anodic oxidation (AN) promoted the proliferation and osteogenic differentiation of pre-osteoblast cells (MC3T3-E1) via enhancing the surface hydrophilicity and bioactivity compared with the polished Ti surface (P). Micro-CT and histological analysis were used to assess the in vivo osteogenic properties enhancement. The results 8 weeks after the surgery showed the ratio of bone volume to total volume (BV/TV) of AN implant was 43.4%, which represented 1.5 times that of as-printed implants (AM) without any post-treatment. Considerable increment of bone-to-implant contact area was also detected from the micro-CT reconstructed 3D models in comparison with AM implants and acid etched (AE) EBM implants. In conclusion, the hierarchical micro/nano topography generated on the EBM native surface showed an improvement of bioactivity and osteogenic properties, which is expected to accelerate the application of 3D printed orthopedic and dental implants in clinics. Statement of significance: Traditional titanium implants have the nature of biological inertness, which limits their capability to bind directly with the bone tissue. The failure of implants after couple of years of implantation will cause huge pain to the patients. In this work, a surface modification method for 3D printed implants was developed to construct a hierarchical micro/nano-structure. Through the in vitro and in vivo experiments, we proved that this hierarchical micro/nano-structure induced a better promotion effect on osteoblast proliferation and differentiation comparing with untreated surface or polished surface, and was also capable of bolstering the new bone formation, suggesting a potent strategy to improve the biological properties of 3D printed titanium implants. The work is expected to accelerate the application of 3D printed orthopedic and dental implants in clinics.

Hierarchical Micropore/Nanorod Apatite Hybrids In-Situ Grown from 3-D Printed Macroporous Ti6Al4V Implants with Improved Bioactivity and Osseointegration

Tailored Surface Treatment of 3D Printed Porous Ti6Al4V by Microarc Oxidation for Enhanced Osseointegration Via Optimized Bone In-Growth Patterns and Interlocked Bone/Implant Interface

Improved Osseointegration of 3D Printed Ti-6Al-4V Implant with a Hierarchical Micro/nano Surface Topography: an in Vitro and in Vivo Study.

Synergistic Enhancement of Osseointegration with Micro-Arc Oxidation Treated 3D-Printed Ti-24nb-4zr-8sn Scaffold Via Contact Osteogenesis and Low Elastic Modulus

Enhanced Osteointegration of Hierarchical Structured 3D-Printed Titanium Implants

Micron/Submicron Scaled Hierarchical Ti Phosphate/Ti Oxide Hybrid Coating on 3D Printed Scaffolds for Improved Osteointegration.

The Synergistic Effect of 3D-Printed Microscale Roughness Surface and Nanoscale Feature on Enhancing Osteogenic Differentiation and Rapid Osseointegration

Comparative Study on 3D Printed Ti6Al4V Scaffolds with Surface Modifications Using Hydrothermal Treatment and Microarc Oxidation to Enhance Osteogenic Activity.

Promotion of Osseointegration between Implant and Bone Interface by Titanium Alloy Porous Scaffolds Prepared by 3D Printing

Biomimetic design strategy of complex porous structure based on 3D printing Ti-6Al-4V scaffolds for enhanced osseointegration

Micro- and Nano-Structured 3D Printed Titanium Implants with a Hydroxyapatite Coating for Improved Osseointegration.

Effect of micro-arc oxidation surface modification of 3D-printed porous titanium alloys on biological properties

Surface Treatment Functionalization of Sodium Hydroxide Onto 3D Printed Porous Ti6Al4V for Improved Biological Activities and Osteogenic Potencies

Hybrid Macro-Porous Titanium Ornamented by Degradable 3D Gel/nHA Micro-Scaffolds for Bone Tissue Regeneration

Enhancing the Osteogenic Differentiation and Rapid Osseointegration of 3D Printed Ti6Al4V Implants Via Nano-Topographic Modification

Fabrication of Customized Ti6AI4V Heterogeneous Scaffolds with Selective Laser Melting: Optimization of the Architecture for Orthopedic Implant Applications.

3D Printed Ti–6Al–4V Implant with a Micro/Nanostructured Surface and Its Cellular Responses

3D Printed Titanium Scaffolds with Ordered TiO2 Nanotubular Surface and Mesoporous Bioactive Glass for Bone Repair

Osteogenesis of 3D Printed Porous Ti6Al4V Implants with Different Pore Sizes

A novel hierarchical biofunctionalized 3D-printed porous Ti6Al4V scaffold with enhanced osteoporotic osseointegration through osteoimmunomodulation

A functional mineralized collagen hydrogel to promote angiogenic and osteogenic for osseointegration of 3D-printed titanium alloy microporous scaffolds