Abstract:Abstract After polymer flooding, a low-resistant dominant seepage channel forms at the bottom of the high-permeability reservoir, which is extremely disadvantageous for further enhanced oil recovery. In this study, we proposed a new method to plug the dominant seepage channel after polymer flooding, through fracturing–seepage–plugging using a solid-free plugging agent, which can achieve deeper and further regional plugging. This method involved dissolving the crosslinking agent and stabilizer in the water-based fracturing fluid (hereinafter referred to as the fracturing plugging agent) and transporting it to the target reservoir through hydraulic fractures. The fracturing plugging agent percolated into the deep part of the reservoir under the action of fracture closure pressure and gelled with the residual polymer in the formation to achieve deep regional plugging of the advantageous channel. To study the percolation law of fracturing plugging agent in the dominant channel, high-pressure displacement experiments were conducted using natural cores under different permeability and concentration conditions of the fracturing plugging agent. The results showed that the percolation rate of the fracturing plugging agent was almost linearly related to reservoir permeability. Due to the formation of micro-fractures and crosslinking reactions, the percolation rate first increased and then decreased to a stable state. After a certain period, the pores were blocked, resulting in a sharp decrease in the percolation rate and then decayed. In addition, the higher the concentration of fracturing plugging agent, the better the core plugging performance. Moreover, when the concentration of fracturing plugging agent injected into the core exceeded 3,000 mg/L, the core permeability increased, and the breakthrough pressure evidently increased three to four times. On the basis of this, rheometer tests, scanning electron microscopy (SEM) observations, and mercury intrusion tests were performed to evaluate gelation performance, shear effect, and pore retention morphology of the crosslinking system made by mixing the injected plugging agent and residual polymer in the reservoir. The results showed that the shear action could reduce the gelling property, and the concentration of fracturing plugging agent should be >3,000 mg/L to meet the requirements of gelling. Furthermore, the viscosity of the crosslinking system reached the peak value at approximately 72 h, forming a network space structure of layered superposition, thereby increasing viscosity by 40–50 times. Finally, SEM images revealed that after the fracture plugging agent was injected into the core, the micelles were mostly concentrated in the front and middle sections. The average pore radius of the core decreased by 8.620 μm, and the average porosity decreased by 54.85%.

Study and Applications of the High-Efficiently Plugging Agent for Thermal Production Wells

Research and Application of a New Type of Plugging Agent

Development and performance test of an expansive particle temporary plugging agent

Study and application of water plugging agent in high temperature and high salt horizontal well

Development and field application of downhole crosslinking plugging agent

Performance Evaluation and Field Application of Nano Plugging Agent for Shale Water-Based Drilling Fluid

Laboratory study and field verification of a thermo-responsive water shutoff agent

Study of Swellable Water-Plugging Agents with Heat- and Hard-water Resistances

Development and Performance of Urea–Formaldehyde Resin/Montmorillonite Intercalation Composite Horizontal well Plugging Agent

Study on Plugging Mechanism of Gel Plugging Agent in Fractured Carbonate Oil Reservoirs

Optimization of degradable temporary plugging material and experimental study on stability of temporary plugging layer

Preparation and performance evaluation of intelligent plugging agent for thermo‐sensitive water‐based drilling fluid

Research and Evaluation of a Nanometer Plugging Agent for Shale Gas Horizontal Wells

Synthesis and Performance Evaluation of a Novel Nanoparticle Coupling Expanded Granule Plugging Agent

Study on effectiveness prediction of water plugging technology in carbonate reservior

Laboratory Evaluation of the Plugging Performance of an Inorganic Profile Control Agent for Thermal Oil Recovery

A Polymer Plugging Gel for the Fractured Strata and Its Application

Experimental Study of Oilfield Water Plugging with Organic Chromium Gel

Temporary Plugging Agent Evaluation Technology and Its Applications in Shale Reservoirs in the Sichuan Basin

A new method for plugging the dominant seepage channel after polymer flooding and its mechanism: Fracturing–seepage–plugging

Development and Application of the Anti-High-Temperature Delayed Crosslinking Polymer as a Gel Plugging Additive for Drilling Fluid