Abstract:Numerical modelling of laterally loaded piles requires a robust pile-soil interface model. The conventional Coulomb friction model has limitations when predicting the soil-structure interaction at shallow depths for battered mini piles (BMPs) in cohesive (fine-grained) soils. This paper proposes an efficient pile-soil interface model to simulate laterally loaded BMPs in cohesive soils using three-dimensional finite element models (FEM). BMP systems have been commonly used to support lateral load-dominated lightweight superstructures. They are hybrid foundations with BMPs oriented at different inclinations and directions, mimicking tree root systems. FEM results indicate that the Coulomb model is unsuitable for simulating the pile-soil interface at shallow depth due to underprediction of shear resistance. The proposed interface model comprising a surface-to-surface cohesive damage interface with friction captures the lateral performance of BMPs accurately. The proposed model was implemented for a range of pile and soil properties to verify its suitability in understanding the behaviour of BMPs. The ultimate lateral capacity of BMPs increases with penetration length up to 1.5 m. While an increase in diameter and undrained shear strength increases the capacity, the lateral load eccentricity negatively impacts it. Interaction diagrams are developed to serve engineers estimate the ultimate lateral capacity of BMPs.

Introduction to Partly Soil Models in ABAQUS Software and Their Application to the Geotechnical Engineering

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

MPM Modeling of Pile Installation in Sand: Contact Improvement and Quantitative Analysis

Model Tests on Elevated Piles Subjected to Lateral Static and Impact Loading

3-D Numerical Simulation for Large-Diameter Cast-<i>In Situ</i> Tubular Pile

3-D Numerical Simulation for Large-Diameter Cast-In-Situ Tubular Pile

New Interaction Model for the Annular Zone of Stepped Piles with Respect to Their Vertical Dynamic Characteristics

A Model Test on the Behavior of A Static Drill Rooted Nodular Pile under Compression

Practical Method for the Pile Composite Ground under Flexible Foundation Based on Super-Substructure Interaction

STUDY ON THE BEHAVIOR OF CANTILEVER DOUBLE-ROW PILES SUPPORTING DEEP EXCAVATION

Behavior of Underground Structures under Large Area Loading

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

FEM Analysis and Simplified Approach for a Single Energy Pile Subjected to Thermomechanical Loads

Numerical Simulation and Factor Analysis of Jacked Pile Compacting Effects

Load Transfer of Offshore Open-Ended Pipe Piles Considering the Effect of Soil Plugging

Shear characteristics of interface based on subloading-friction model

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile

A new pile-soil interface and its application in battered mini piles under monotonic lateral load in cohesive soil

Dynamic Impedances and Free-Field Vibration Analysis of Pile Groups in Saturated Ground

Model Test And Numerical Analysis Of Geogrid-Reinforced Pile-Supported Foundation

Soil-structure Interface Modeling of Pile-Soil Interaction with an Elasto-Plasticity Damage Model