Abstract:The cold start-up of the PEMFC (proton exchange membrane fuel cell) stack from sub-zero temperature is considered one of the significant obstacles to its expansive commercial applications. In the cold start-up process, with the progress of hydrogen/oxygen chemical reaction, the produced water will freeze into ice, occupying the pores of the porous electrode, thus leading to a rapid deterioration of output performance and even making the cold start-up fail. In this work, a one-dimensional numerical model is adopted to study a cold start-up process of the PMEFC stack starting from −30°C. The stepwise-changed current loading mode is employed in the process. An assisted preheating method is used to explore an optimal operating condition for a successful cold start-up. The numerical results are validated by comparing the numerical result with the experimental data in reference, and they agree with the experimental data very well. The results show that the optimal heating power in the studied range is 100 W. As the initial current slope increased, the current peak value increased, but the cold start-up process failed. Also, the start-up time and ice volume fraction are highly dependent on the initial current slope. The optimal initial current slope is 0.7 A/s. Besides, a higher initial current slope will cause a significant inner ohmic resistance. The resistance of CLa (catalyst layer of the anode) is the key and primary part of the total ohmic resistance. The details of the research and the analyzed results will help design the cold start-up strategy for the PEMFC stack start-up from −30°C.

Advancement of water and heat distributions of PEMFC during cold start

Numerical Studies of Cold-Start Phenomena in PEM Fuel Cells: A Review

Numerical studies of cold-start phenomenon in PEM fuel cells

Numerical analyses of non-isothermal self-start behaviors of PEM fuel cells from subfreezing startup temperatures

A Pem Fuel Cell Model for Cold-Start Simulations

Study on the temperature distribution and its effect on self-start of large-area proton exchange membrane fuel cells at subzero temperatures

Freeze Start of Proton Exchange Membrane Fuel Cell Systems with Closed-Loop Purging and Improved Voltage Consistency

Characteristics of Cold Start Behavior of PEM Fuel Cell with Metal Foam as Cathode Flow Field under Subfreezing Temperature

Numerical Research on the Cold Start-up Strategy of a PEMFC Stack from −30°C

A Review on Subzero Startup of Proton Exchange Membrane Fuel Cell

Cold Start Mode Classification Based on the Water State for Proton Exchange Membrane Fuel Cells

Thermal Stability Analysis of Cold Start Processes in PEM Fuel Cells

Investigation of assisted heating cold start strategies from -40 °C for proton exchange membrane fuel cell stack

An efficient cold start strategy for proton exchange membrane fuel cell stacks

Study on internal dynamic response during cold start of proton exchange membrane fuel cell with parallel and serpentine flow fields

Cold start optimization of the proton-exchange membrane fuel cell by penetrating holes in the cathode micro-diffusion layer

Mechanism analysis of the effect of different gas manifold positions on proton exchange membrane fuel cell cold start performance

Research on Water and Heat Management in the Cold Start Process of Proton Exchange Membrane Fuel Cell with Expanded Graphite Bipolar Plate

Advancements and insights in thermal and water management of proton exchange membrane fuel cells: Challenges and prospects

Pre-Heat and Start-Up Process of High Temperature Proton Exchange Membrane Fuel Cell

Cold Start of PEMFC Using Alternating Hydrogen Pump: Part I. Mechanistic Modeling